2. ROOMS TO GO
  3. 22115403

ROOMS TO GO 22115403 Assembly Instructions

  • I've reviewed the assembly instructions for the Cocktail Table NESTING ATT154C. This document provides a detailed parts list, hardware information, and sequential steps for assembling the table, including adding casters, glass and mirror tops. I'm ready to answer your questions about the assembly process, components, or features of this nesting cocktail table.
  • What tools are needed for assembly?
    Are all necessary hardware parts included?
    What should I do before starting the assembly process?
Assembly Instruction
ATT154C
NESTING COCKTAIL TABLE
SKU# 22115403
Thank you for your purchase. Before discarding packaging material be sure you have
located all the parts including the necessary hardware and tools listed on the instruction
sheet below.
Parts List
# 1
1pc
Big Top Frame
# 2
3pcs
Long Metal Leg
# 3
1pc
Big Open Frame
# 4
1pc
Big Black Glass Top
# 5
1pc
Small Top Frame
# 6
4pcs
Short Metal Leg
# 7
1pc
Small Metal Ring
# 8
1pc
Small Mirror Top
#9
4pcs
Casters w/ Open wrench
Hardware List
No
Figure Description QTY
No Figure Description QTY
A Bolt 1/4”x 20 x 1/2”
14 C Glass Tips 6
B Philips Head
3/16" x10mm 7 D 4mm Hex Allen
Wrench 1
Please do not tighten any bolt firmly before you put all of them in place.
Step 1) Put all parts on a soft surface to prevent scratches. Attach long metal legs (#2) to
big top frame (#1) by using bolt (A) as below shown.
Step 2) Please note no screwdriver included in hardware package and screwdriver is
necessary for this assembly. Attach big open frame (#3) to long metal legs (#2) by using
Philips Head bolt (B) as below shown then tighten all bolts firmly.
Step 3) Repeat as Step 1) attach short metal legs (#6) to small top frame (#5) by using bolt
(A) as below shown.
Step 4) Same as Step 2), no screwdriver included in hardware package and screwdriver is
necessary for this assembly. Attach small metal ring (#7) to short metal legs (#6) by using
Philips Head bolt (B) as below shown then tighten all bolts firmly. Following to attach
casters (#9) to short metal legs (#6) by using open wrench.
5) Turn both tables upside down, put glass tips (C) onto big top frame (#1) then put on big
black glass top (#4) and small mirror top (#8) as below shown carefully. Your perfect tables
are completed.
/