ContentsContents Chapter1. Product IntroductionChapter1. Product Introduction
1.1 Specification
1
Chapter 1. Product Introduction
1.1 Specification
4.1 RSI Cooler (Optional)
4.2 RSI Power Supply (Optional)
Chapter 4 RSI Cooler and Power Supply
Chapter 2 Case Mechanical Operation
1
2
3
3
5
5
7
8
9
11
12
12
13
13
14
15
Micro ATX , Standard ATX Motherboards
Transparent window
Side Panel
Front (Intake) :
120 x 120 x 25 mm (optional)
Rear (Exhaust) :
120 x 120 x 38 mm, 1200rpm, 17dBA
VG6000BNS
Standard ATX PSII (Option)PSU
USB 2.0 x 2,
e-SATA connector x 1, HD Audio
I/O Ports
VG6000BWS
540.0 x 205.0 x 496.0 mm
(21.3 x 8.1 x 19.5 inch)
Black
Full TowerCase Type
7Expansion Slots
Color
SECCMaterial
12
5 x 5.25 , 2 x 3.5
5 x 3.5
Drive Bays
-Front accessible
-Internal
Cooling System
Dimension
(H*W*D)
Model
Micro ATX , Standard ATX Motherboards
Transparent window
Honeycomb see -
through window
Side Panel
Front (Intake) :
120 x 120 x 25 mm (optional)
Rear (Exhaust) :
120 x 120 x 38 mm, 1200rpm, 17dBA
VG6000BNS
Standard ATX PSII (Option)PSU
USB 2.0 x 2,
e-SATA connector x 1, HD Audio
I/O Ports
VG6000BWS
540.0 x 205.0 x 496.0 mm
(21.3 x 8.1 x 19.5 inch)
Black
Full TowerCase Type
7Expansion Slots
Color
SECCMaterial
12
5 x 5.25", 2 x 3.5 "
5 x 3.5"
Drive Bays
-Front accessible
-Internal
Cooling System
Dimension
(H*W*D)
Model
2.1 How to open the side panel
2.8 Front fan installation (optional)
2.2 How to install PSU
2.3 5.25" device installation
2.5 3.5" device installation
2.6 Motherboard installation
2.4 HDD installation
2.7 PCI slot usage
Chapter3 Motherboard & Leads Installation
3.1 Motherboard Installation
3.2 Case LED connection
3.4 eSATA connection
3.5 Audio Connection
3.3 USB 2.0 connect
ContentsContents Chapter1. Product IntroductionChapter1. Product Introduction
1.1 Specification
1
Chapter 1. Product Introduction
1.1 Specification
4.1 RSI Cooler (Optional)
4.2 RSI Power Supply (Optional)
Chapter 4 RSI Cooler and Power Supply
Chapter 2 Case Mechanical Operation
1
2
3
3
5
5
7
8
9
11
12
12
13
13
14
15
Micro ATX , Standard ATX Motherboards
Transparent window
Side Panel
Front (Intake) :
120 x 120 x 25 mm (optional)
Rear (Exhaust) :
120 x 120 x 38 mm, 1200rpm, 17dBA
VG6000BNS
Standard ATX PSII (Option)PSU
USB 2.0 x 2,
e-SATA connector x 1, HD Audio
I/O Ports
VG6000BWS
540.0 x 205.0 x 496.0 mm
(21.3 x 8.1 x 19.5 inch)
Black
Full TowerCase Type
7Expansion Slots
Color
SECCMaterial
12
5 x 5.25 , 2 x 3.5
5 x 3.5
Drive Bays
-Front accessible
-Internal
Cooling System
Dimension
(H*W*D)
Model
Micro ATX , Standard ATX Motherboards
Transparent window
Honeycomb see -
through window
Side Panel
Front (Intake) :
120 x 120 x 25 mm (optional)
Rear (Exhaust) :
120 x 120 x 38 mm, 1200rpm, 17dBA
VG6000BNS
Standard ATX PSII (Option)PSU
USB 2.0 x 2,
e-SATA connector x 1, HD Audio
I/O Ports
VG6000BWS
540.0 x 205.0 x 496.0 mm
(21.3 x 8.1 x 19.5 inch)
Black
Full TowerCase Type
7Expansion Slots
Color
SECCMaterial
12
5 x 5.25", 2 x 3.5 "
5 x 3.5"
Drive Bays
-Front accessible
-Internal
Cooling System
Dimension
(H*W*D)
Model
2.1 How to open the side panel
2.8 Front fan installation (optional)
2.2 How to install PSU
2.3 5.25" device installation
2.5 3.5" device installation
2.6 Motherboard installation
2.4 HDD installation
2.7 PCI slot usage
Chapter3 Motherboard & Leads Installation
3.1 Motherboard Installation
3.2 Case LED connection
3.4 eSATA connection
3.5 Audio Connection
3.3 USB 2.0 connect
3
2
11
11
11
11
33
22
22
22
22
Chapter 2 Case Mechanical OperationChapter 2 Case Mechanical Operation
2.1 How to open the side panel
To remove the side panel, please
remove upper and bottom thumb
screws on the back of the case.
Push the handle then swing out the side panel.
Transparent side panel
Honeycomb see-through side panel
To remove the side panel,
please remove upper and
bottom thumb screws on the
back of the case.
Insert the provided key and
turn it clockwise.
Push the handle then swing out the side panel.
2.2 How to install PSU
Place power supply unit
in the right position.
2.3 5.25" device installation
Open the front door first. Remove the 5.25" drive bay plastic
cover by pressing it at the bottom
corner .
Secure it by screws as shown.
2
1
3
2
11
11
11
11
33
22
22
22
22
Chapter 2 Case Mechanical OperationChapter 2 Case Mechanical Operation
2.1 How to open the side panel
To remove the side panel, please
remove upper and bottom thumb
screws on the back of the case.
Push the handle then swing out the side panel.
Transparent side panel
Honeycomb see-through side panel
To remove the side panel,
please remove upper and
bottom thumb screws on the
back of the case.
Insert the provided key and
turn it clockwise.
Push the handle then swing out the side panel.
2.2 How to install PSU
Place power supply unit
in the right position.
2.3 5.25" device installation
Open the front door first. Remove the 5.25" drive bay plastic
cover by pressing it at the bottom
corner .
Secure it by screws as shown.
2
1
5
4
77
11
88
22
3344
1122
44
5566
33
Remove the 5.25" drive bay metal cover.
Mount drive rails to 5.25" device and fasten the device using screws.
Find the drive bay rails right
behind the plastic drive bay
cover.
Slide the 5.25" device into
drive bay till the fix-position. 5.25" device installation
complete.
2.4 HDD installation
Press the clip on each side of
the HDD tray and pull backward
to take off the HDD tray.
Place HDD on the drive tray,
then secure HDD by screws.
HDD installation complete.
Unscrew the 3.5" metal cover.
2.5 3.5" device installation
Slide HDD tray into the
cage till the fix-position.
Press the clip on each side of the
3.5" tray and pull backward to
take off the 3.5" tray.
5
4
77
11
88
22
3344
1122
44
5566
33
Remove the 5.25" drive bay metal cover.
Mount drive rails to 5.25" device and fasten the device using screws.
Find the drive bay rails right
behind the plastic drive bay
cover.
Slide the 5.25" device into
drive bay till the fix-position. 5.25" device installation
complete.
2.4 HDD installation
Press the clip on each side of
the HDD tray and pull backward
to take off the HDD tray.
Place HDD on the drive tray,
then secure HDD by screws.
HDD installation complete.
Unscrew the 3.5" metal cover.
2.5 3.5" device installation
Slide HDD tray into the
cage till the fix-position.
Press the clip on each side of the
3.5" tray and pull backward to
take off the 3.5" tray.
7
6
11
33
445533
4455
Place and fasten 3.5" device by screws.
3.5" device installation
complete.
2.6 Motherboard installation
Remove thumb screws on the motherboard tray.
Slide the motherboard tray
toward the drives and remove it.
22
Place the motherboard tray on a flat
surface and mount the motherboard.
Place the motherboard tray
back to the case and slide it
back to the position.
Screw up the thumb screws.
Slide the 3.5" tray into drive
bay till the fix-position.
Note:
While doing motherboard installation,
please also refer to Page 11.
7
6
11
33
445533
4455
Place and fasten 3.5" device by screws.
3.5" device installation
complete.
2.6 Motherboard installation
Remove thumb screws on the motherboard tray.
Slide the motherboard tray
toward the drives and remove it.
22
Place the motherboard tray on a flat
surface and mount the motherboard.
Place the motherboard tray
back to the case and slide it
back to the position.
Screw up the thumb screws.
Slide the 3.5" tray into drive
bay till the fix-position.
Note:
While doing motherboard installation,
please also refer to Page 11.
1111
22
22
33
33
55
44
2.7 PCI slot usage
Take off the tool-free kit as
shown.
Remove the PCI bracket.
Locate Graphic Card to the
motherboard through fixing it
on the space of PCI bracket.
Put back the tool-free kit to
lock the Graphic Card as
shown.
Installation complete.
Note:
1.If your add-on card is a 2-slot add-on card or
have trouble securing your PCI card, please
remove the tool-free kit from the chassis and
secure PCI card by screws.
2. If you are system integrator, we strongly
recommend to secure add-on cards using
screws.
2.8 Front fan installation (optional)
Remove both side panels.
Remove the front panel using a flat-head screwdriver.
Take off the whole front panel.
9
8
1
2
1111
22
22
33
33
55
44
2.7 PCI slot usage
Take off the tool-free kit as
shown.
Remove the PCI bracket.
Locate Graphic Card to the
motherboard through fixing it
on the space of PCI bracket.
Put back the tool-free kit to
lock the Graphic Card as
shown.
Installation complete.
Note:
1.If your add-on card is a 2-slot add-on card or
have trouble securing your PCI card, please
remove the tool-free kit from the chassis and
secure PCI card by screws.
2. If you are system integrator, we strongly
recommend to secure add-on cards using
screws.
2.8 Front fan installation (optional)
Remove both side panels.
Remove the front panel using a flat-head screwdriver.
Take off the whole front panel.
9
8
1
2
11
Each motherboard has different standoff layout. It is highly
suggested that you refer to your motherboard's manual when
installing motherboard into the Case. The cases are applicable with
Standard ATX, Micro ATX motherboards.
Your motherboard may require a special I/O Panel, which should be
included with your motherboard.
Placement Direction:
When installing the motherboard, make sure you follow the direction
provided by your motherboard manufacturer. On most standard
motherboards, the edge with external ports goes to the rear part of the
chassis. It is highly recommended that you install CPU, heat sink and
modular components before fixing the motherboard inside the chassis.
3.1 Motherboard Installation
= the locations of
the screw holes. Note
these locations and
place included
standoffs on the chassis
first.
This side towards
the rear of the
chassis
Above illustration is a sample of what
the motherboard's layout. For more
detail screw hole placement, please
refer to your motherboard manual.
Chapter3 Motherboard & Leads InstallationChapter3 Motherboard & Leads Installation
10
4455
Place the 120mm fan and
fasten the fan by screws.
Find the fan filter from the enclosed
package and place it on the fan. Front fan
installation complete.
11
Each motherboard has different standoff layout. It is highly
suggested that you refer to your motherboard's manual when
installing motherboard into the Case. The cases are applicable with
Standard ATX, Micro ATX motherboards.
Your motherboard may require a special I/O Panel, which should be
included with your motherboard.
Placement Direction:
When installing the motherboard, make sure you follow the direction
provided by your motherboard manufacturer. On most standard
motherboards, the edge with external ports goes to the rear part of the
chassis. It is highly recommended that you install CPU, heat sink and
modular components before fixing the motherboard inside the chassis.
3.1 Motherboard Installation
= the locations of
the screw holes. Note
these locations and
place included
standoffs on the chassis
first.
This side towards
the rear of the
chassis
Above illustration is a sample of what
the motherboard's layout. For more
detail screw hole placement, please
refer to your motherboard manual.
Chapter3 Motherboard & Leads InstallationChapter3 Motherboard & Leads Installation
10
4455
Place the 120mm fan and
fasten the fan by screws.
Find the fan filter from the enclosed
package and place it on the fan. Front fan
installation complete.
13
12
On the front of the case, you can find some LEDs and switch leads
(POWER SW*1, POWER LED*1, H.D.D. LED*1, RESET SW*1).
Please consult user manual of your motherboard manufacturer,
then connect these leads to the panel header on the motherboard.
These leads are usually labeled; if not, please trace them back to
the case front to find out their source.
- POWER LED connects to your M/B at the PLED
- POWER SW connects to the PWR connector on the motherboard.
- H.D.D LED connects to the 2-pin labeled HDD LED connector.
- RESET SW connects to the RSW connector on the motherboard,
- SPEAKER connects to the SPK connector on the motherboard
3.2 Case LED connection
Please consult your motherboard
manual to find out the section of
"USB connection".
USB connection
3.3 USB 2.0 connection
3.4 eSATA connection
Connect this to your
motherboard at SATA.
VCC
-D
+D
GROUND
RED
WHITE
GREEN
BLACK
KEY
RED
WHITE
GREEN
BLACK
NC
VCC
-D
+D
GROUND
USB Function
RED
BROWN
YELLOW
PURPLE
BULE
BLACK
BLACK
ORANGE
KEY
GREEN
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
AUD GND
PRESENCE#
SENSE1_RETURN
SENSE1_RETURN
AUDIO AZALIA Function
MICIN
MIC POWER
R-OUT
L-OUT
RED
BROWN
YELLOW
NC
BULE
BLACK
NC
YELLOW
KEY
BLUE
GROUND
R-RET
L-RET
AUDIO AC'97 Function
- Please refer to the following illustration of Audio connector and your
motherboard user manual.
- Please select the motherboard which used AC'97 or HD Audio (Azalia),
(be aware of that your audio supports AC'97 or HD Audio (Azalia)) or it will
damage your device(s).
- On some motherboards, the connectors for Audio are not the same as the
drawing below. Please check with your motherboard manual before installing.
3.5 Audio Connection
13
12
On the front of the case, you can find some LEDs and switch leads
(POWER SW*1, POWER LED*1, H.D.D. LED*1, RESET SW*1).
Please consult user manual of your motherboard manufacturer,
then connect these leads to the panel header on the motherboard.
These leads are usually labeled; if not, please trace them back to
the case front to find out their source.
- POWER LED connects to your M/B at the PLED
- POWER SW connects to the PWR connector on the motherboard.
- H.D.D LED connects to the 2-pin labeled HDD LED connector.
- RESET SW connects to the RSW connector on the motherboard,
- SPEAKER connects to the SPK connector on the motherboard
3.2 Case LED connection
Please consult your motherboard
manual to find out the section of
"USB connection".
USB connection
3.3 USB 2.0 connection
3.4 eSATA connection
Connect this to your
motherboard at SATA.
VCC
-D
+D
GROUND
RED
WHITE
GREEN
BLACK
KEY
RED
WHITE
GREEN
BLACK
NC
VCC
-D
+D
GROUND
USB Function
RED
BROWN
YELLOW
PURPLE
BULE
BLACK
BLACK
ORANGE
KEY
GREEN
PORT1 L
PORT1 R
PORT2 R
SENSE_SEND
PORT2 L
AUD GND
PRESENCE#
SENSE1_RETURN
SENSE1_RETURN
AUDIO AZALIA Function
MICIN
MIC POWER
R-OUT
L-OUT
RED
BROWN
YELLOW
NC
BULE
BLACK
NC
YELLOW
KEY
BLUE
GROUND
R-RET
L-RET
AUDIO AC'97 Function
- Please refer to the following illustration of Audio connector and your
motherboard user manual.
- Please select the motherboard which used AC'97 or HD Audio (Azalia),
(be aware of that your audio supports AC'97 or HD Audio (Azalia)) or it will
damage your device(s).
- On some motherboards, the connectors for Audio are not the same as the
drawing below. Please check with your motherboard manual before installing.
3.5 Audio Connection
15
4.2 RSI Power Supply (Optional)
FEATURES:
- Intel ATX 12V 2.0 Compatible.
- Supports 6-pin PCI-Express, 2 SATA, and 20+4 pin connector.
- Dual +12V output circuit provides steady output for system.
- Super quiet and stable 12cm ball bearing fan.
- Build-in Over Current Protection, Over Voltage protection, and
Short-Circuit protection.
- Safety : UL, CUL, CE, NEMKO, TUV+CB, BSMI, FCC certification.
Litepower 400W
P/N: W0161 W/PFC P/N: W0162 No PFC
ATX
12V 2.0
X1
PCI
Express
X2
S-ATA
AMD/
Intel
Dual Core
Support
PFC
Universal
24(20)
Pin
14
FEATURES :
- Perfect ratio aluminum extrusion heatsink
for better heat dissipation.
- Tool-less clip, easy installation.
- Silent Solution
FEATURES:
- Aluminum Crotch Fin provides more heat
dissipation area.
- Silent operation.
Optimized solution for low power processors.
- Back plate & Spring Screw mounting method
ensure safe installation when shipping.
P/N : CL-P0441
Designed for Intel Core 2 Duo Processor
Application for Intel Core 2 Duo / Pentium D /
Celeron series (Socket LGA775)
P/N : CL-P0444
Application for
AMD Athlon 64 X2/Athlon 64 FX/
Athlon 64(Socket AM2/ 939/754) and
Sempron (Socket AM2/754)
4.1 RSI Cooler (Optional)
Chapter4 RSI Cooler and Power SupplyChapter4 RSI Cooler and Power Supply
15
4.2 RSI Power Supply (Optional)
FEATURES:
- Intel ATX 12V 2.0 Compatible.
- Supports 6-pin PCI-Express, 2 SATA, and 20+4 pin connector.
- Dual +12V output circuit provides steady output for system.
- Super quiet and stable 12cm ball bearing fan.
- Build-in Over Current Protection, Over Voltage protection, and
Short-Circuit protection.
- Safety : UL, CUL, CE, NEMKO, TUV+CB, BSMI, FCC certification.
Litepower 400W
P/N: W0161 W/PFC P/N: W0162 No PFC
ATX
12V 2.0
X1
PCI
Express
X2
S-ATA
AMD/
Intel
Dual Core
Support
PFC
Universal
24(20)
Pin
14
FEATURES :
- Perfect ratio aluminum extrusion heatsink
for better heat dissipation.
- Tool-less clip, easy installation.
- Silent Solution
FEATURES:
- Aluminum Crotch Fin provides more heat
dissipation area.
- Silent operation.
Optimized solution for low power processors.
- Back plate & Spring Screw mounting method
ensure safe installation when shipping.
P/N : CL-P0441
Designed for Intel Core 2 Duo Processor
Application for Intel Core 2 Duo / Pentium D /
Celeron series (Socket LGA775)
P/N : CL-P0444
Application for
AMD Athlon 64 X2/Athlon 64 FX/
Athlon 64(Socket AM2/ 939/754) and
Sempron (Socket AM2/754)
4.1 RSI Cooler (Optional)
Chapter4 RSI Cooler and Power SupplyChapter4 RSI Cooler and Power Supply
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
Thermaltake SoprranoRS 100 User manual
- Category
- Computer cases
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Thermaltake VG1430BNS Datasheet
-
-
-
-
-
-
-
-
-