B-K lighting Core Drill Round Louvered - GU10 Installation guide

Brand
B-K lighting
Model
Core Drill Round Louvered - GU10
Type
Installation guide

B-K lighting Core Drill Round Louvered - GU10 is a versatile and durable lighting fixture designed for both indoor and outdoor use. With its ability to withstand the elements, this fixture is suitable for wet locations and can be mounted within 4 feet of the ground, making it ideal for illuminating pathways, driveways, and other outdoor areas.

The Core Drill Round Louvered - GU10 features a compact design with a 2 1/2-inch diameter and a 5 1/2-inch depth, allowing for easy installation in tight spaces. Its sturdy construction ensures longevity and reliability, while its sleek design complements a variety of architectural styles.

B-K lighting Core Drill Round Louvered - GU10 is a versatile and durable lighting fixture designed for both indoor and outdoor use. With its ability to withstand the elements, this fixture is suitable for wet locations and can be mounted within 4 feet of the ground, making it ideal for illuminating pathways, driveways, and other outdoor areas.

The Core Drill Round Louvered - GU10 features a compact design with a 2 1/2-inch diameter and a 5 1/2-inch depth, allowing for easy installation in tight spaces. Its sturdy construction ensures longevity and reliability, while its sleek design complements a variety of architectural styles.

RELEASE DATE
8-18-17
REFERENCE NUMBER
INS-1483
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF B-K LIGHTING, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY
DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF B-K LIGHTING, INC. IS STRICTLY FORBIDDEN.
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE THESE INSTALLATION INSTRUCTIONS
CD-SS-B
Installation Instructions
Warning High Voltage Hot Surface
TOOLS
&
MATERIALS
NEEDED:
5/64” Allen Wrench
Drill with 2-1/2” Core Drill Bit
Waterproof Wire Connectors
Mounting Hardware
CORE DRILL
Line Voltage GU10
• Product must be installed by a qualified person in a manner
consistent with its intended use and in compliance with the
National Electrical Code, Canadian Electrical Code, and all Local
and Provincial Codes.
• Follow product label information and instructions.
• Qualified Personnel must perform all servicing or relamping of
this product.
• Before wiring to power supply and during servicing or relamping,
turn off power at fuse or circuit breaker before service.
• The use of accessory equipment not recommended by the
manufacturer or installed contrary to instructions may cause an
unsafe condition. The use of damaged components may cause
an unsafe condition and void product warranty.
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY
AND INSTALLATION INSTRUCTIONS
• Do not block light emanating from product in whole or part, as
this may cause an unsafe condition.
• Never operate the fixture with missing or damaged lens.
Lens must be cleaned on regular basis.
• Entire fixture may become extremely hot. Do not touch hot
lens or fixture body. Do not touch the lamp at any time. Use
a clean, dry, soft cloth to handle the lamp. Oil from skin may
damage the lamp and cause it to rupture.
• Replace lamp only with correct wattage and type of lamp
marked on fixture label.
• All gaskets, o-rings and sealing surfaces must be kept clean
during installation and service; failure to do this may cause an
unsafe condition and void product warranty.
INSTRUCTIONS PERTAINING TO
A RISK OF FIRE, OR INJURY TO
PERSONS IMPORTANT SAFETY
INSTRUCTIONS
Lighted lamp is HOT!
WARNING - To reduce the risk of FIRE OR INJURY TO PERSONS:
Turn off/unplug and allow to cool before replacing lamp.
Lamp gets HOT quickly! Contact only switch/plug when
turning on.
Do not touch hot lens, guard, or enclosure (see diagram/
picture).
Keep lamp away from materials that may burn.
Do no touch the lamp at any time. Use a soft cloth. Oil
from skin may damage lamp.
Do not operate the luminaire fitting with a missing or
damaged shield.
SAVE THESE INSTRUCTIONS
· Suitable for wet location · Additionally suitable for mounting within 4 ft. of the ground • Type Non-IC
IMPORTANT LISTINGS AND CERTIFICATIONS
CD- SQ CD-SQL CD- VQ CD- VQL CD- VB CD- VBL
CD- SS-A CD- SSL CD- VS CD- VSL CD- BQ
GD
CD- BQL
This set of instructions works for:
CD-SS-A - Core Drill Step Star™ A
CD-SS-B - Core Drill Step Star™ B
CD-SSL - Core Drill Louvered Step Star™
CD-VS - Core Drill Versa Star™
CD-VSL - Core Drill Louvered Versa Star™
CD-BQ - Core Drill Brick Star™
CD-BQL - Core Drill Louvered Brick Star™
CD-SQ - Core Drill Square Step Star™
CD-SQL - Core Drill Louvered Square Step Star™
CD-VQ - Core Drill Square Versa Star™
CD-VQL - Core Drill Louvered Square Versa Star™
CD-VB - Core Drill Vertical Brick Star™
CD-VBL - Core Drill Louvered Vertical Brick Star™
GD - Gold Star™
Body
Faceplate
By Others
RELEASE DATE
8-18-17
REFERENCE NUMBER
INS-1483
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.bklighting.com • [email protected]
B-K LIGHTING
4. Install fixture into core drilled hole and mount
with (2) #10 fasteners as required (mounting
screws supplied by others.) Length and type of
mounting screws will vary with construction
material.
LINE
FIXTURE
COM
WIRING DIAGRAM
GROUND
LINE
COM
GROUND
3. Make three line voltage connections using proper
wire connectors (By Others). All line voltage
connections must be made in compliance with
the National Electrical Code. Failure to do so will
void warranty.
5”
2 1/2”
MR16 GU10
LED
5 1/2”
2 1/2”
5 1/2”
21/2”
Mounting
Hardware
O. C. 31/2”
Fixture Installation
1. Core drill a 2 1/2” hole 5 1/2” deep into a non-
combustible material.
Note: Suitable for installation into non-
combustible material.
2. Install maximum 50W GU10 lamp.
Halogen Lamps Only. Do NOT exceed
maximum wattage.
1. Loosen 5/64” set screw to remove faceplate. 3. Re-attach faceplate to core drill body and tighten
set screw.
Do not over tighten!
RELAMPING OR LAMP INSTALLATION - IF REQUIRED (HALOGEN LAMPS ONLY)
2. Pull branch circuit wiring (By Others).
Leave sufficient cable length for fixture
service.
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
PROJECT:
TYPE:
CORE DRILL
Line Voltage GU10
WIRING DIAGRAM
Installation Instructions
  • Page 1 1
  • Page 2 2

B-K lighting Core Drill Round Louvered - GU10 Installation guide

Brand
B-K lighting
Model
Core Drill Round Louvered - GU10
Type
Installation guide

B-K lighting Core Drill Round Louvered - GU10 is a versatile and durable lighting fixture designed for both indoor and outdoor use. With its ability to withstand the elements, this fixture is suitable for wet locations and can be mounted within 4 feet of the ground, making it ideal for illuminating pathways, driveways, and other outdoor areas.

The Core Drill Round Louvered - GU10 features a compact design with a 2 1/2-inch diameter and a 5 1/2-inch depth, allowing for easy installation in tight spaces. Its sturdy construction ensures longevity and reliability, while its sleek design complements a variety of architectural styles.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers