Chief PSMH2841 Installation guide

Category
Flat panel wall mounts
Type
Installation guide

Chief PSMH2841 is a large flat panel static wall mount designed for TVs and displays up to 275 lbs. It features a latching flag for quick and easy installation, and a variety of mounting options for different display sizes. The PSMH2841 is constructed from heavy-duty steel and has a durable powder coat finish. It is ideal for use in commercial and residential applications.

Chief PSMH2841 is a large flat panel static wall mount designed for TVs and displays up to 275 lbs. It features a latching flag for quick and easy installation, and a variety of mounting options for different display sizes. The PSMH2841 is constructed from heavy-duty steel and has a durable powder coat finish. It is ideal for use in commercial and residential applications.

INSTALLATION INSTRUCTIONS
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Large Flat Panel Static Wall Mount
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
PSMH2841
PSMH2841 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support a minimum of 2,000lbs (907.185kg). Reinforce
the structure as required before installing the component.
The wall to which the mount is being attached may have a
maximum drywall thickness of 5/8" (1.6cm).
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the PSMH-2841 mount does not
exceed 275 lbs (124.74 kg).
DIMENSIONS
3.00
76
2.25
57
19.50
21.00
533
18.00
457
1.50
38
19.50
495
7.00
178
16.00
406
11.00
279
8.00
203
.39" X 2.25" SLOT
MOUNTING HOLE IN
BACK OF DISPLAY
1.25
ADDED DEPTH
32
Installation Instructions PSMH2841
3
LEGEND
TOOLS FOR INSTALLATION/PARTS
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Open-Ended Wrench
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Hex-Head Wrench
Ajustar
Einstellen
Ajustar
Regolare
Afstellen
Ajuster
7/32"
1/2"
M5 (included)
A (1)
[static mount]
B (1)
[mounting button]
C (4)
5/16-20 x 2 1/2"
D (4)
M8 x 35mm
E (4)
M8x 25mm
F (1)
#10-24 x 1/2"
G (4)
5/16"
H (1)
.194x.375x.032
J (1)
M5
L (1)
#10-24"
K (4)
[latching flag]
PSMH2841 Installation Instructions
4
ASSEMBLY AND INSTALLATION
Mount Installation
1. Determine mounting location.
2. Use a stud finder to locate studs.
3. Use static mount (A) and a level to mark four mounting
holes in the center of two studs. (See Figure 1)
4. Drill four 7/32" pilot holes at marked locations. (See Figure
1)
5. Use four 5/16-20 x 2 1/2" lag bolts (C) and four 5/16"
washers (G) to secure static mount (A) to wall. (See Figure
1)
Figure 1
6. Secure latching flag (B) to mount using #10-24 x 1/2"
Phillips machine screw (F), spacer (H) and #10-24 lock nut
(J). (See Figure 2)
Figure 2
Display Installation
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the PSMH-2841 mount does not
exceed 275 lbs (124.74 kg).
1. Determine length of screw to use to connect mounting
buttons to display.
2. Attach mounting buttons (K) to back of display using four
M8x25mm or M8x35mm button head cap screws (D or E).
(See Figure 3)
Figure 3
3. Make sure latching flag (B) is in open position. (See Figure
4)
4. Hang display on mount by placing mounting buttons (K) in
four teardrop mounting holes. (See Figure 4)
5. Secure by moving flag into closed position. (See Figure 4)
Figure 4
3
x 4
x 4
4
(A)
5
(C) x 4
(G) x 4
(J)
(H)
(B)
(F)
5
(K) x 4
(D or E) x 4
2
flag in open
position
5
4
Installation Instructions PSMH2841
5
PSMH2841 Installation Instructions
6
Installation Instructions PSMH2841
7
PSMH2841 Installation Instructions
Chief Manufacturing, a products division
of Milestone AV Technologies
8805-002010 Rev 00
2010 Milestone Technologies, a
Duchossois Group Company
www.chiefmfg.com
09/10
USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378
P 800.582.6480 / 952.894.6280
F 877.894.6918 / 952.894.6918
Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands
P +31 (0)40 2668620
F +31 (0)40 2668615
Asia Pacific A Office No. 1 on 12/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P 852 2145 4099
F 852 2145 4477
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Chief PSMH2841 Installation guide

Category
Flat panel wall mounts
Type
Installation guide

Chief PSMH2841 is a large flat panel static wall mount designed for TVs and displays up to 275 lbs. It features a latching flag for quick and easy installation, and a variety of mounting options for different display sizes. The PSMH2841 is constructed from heavy-duty steel and has a durable powder coat finish. It is ideal for use in commercial and residential applications.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI