Chief HB-011E User manual

Chief
Brand
Chief
Model
HB-011E
Category
Mounting kits
Type
User manual

This manual is also suitable for

Chief HB-011E is a custom projector bracket designed to securely mount your projector to a ceiling. It features a triangle-shaped design that points towards the front of the projector for easy alignment, and four M6 x 16mm button head screws and four M6 flat washers for secure attachment. The bracket is compatible with VCM housings, which allow for flexible mounting options and easy projector installation. With a sturdy construction and durable materials, Chief HB-011E ensures reliable support for your projector, providing a stable and optimal viewing experience.

Chief HB-011E is a custom projector bracket designed to securely mount your projector to a ceiling. It features a triangle-shaped design that points towards the front of the projector for easy alignment, and four M6 x 16mm button head screws and four M6 flat washers for secure attachment. The bracket is compatible with VCM housings, which allow for flexible mounting options and easy projector installation. With a sturdy construction and durable materials, Chief HB-011E ensures reliable support for your projector, providing a stable and optimal viewing experience.

INSTALLATION INSTRUCTIONS
Milestone AV Technologies, Inc., and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone
makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation
or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, ex-
pressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this
document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8803-002006 Rev00
©2009 Milestone AV Technologies,
a Duchossois Group Company
09/09
MODEL: HB-011E Custom Projector Bracket
Unpack carton and verify contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.
PARTS
Figure 1:
INSTALLATION
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY! All components must be securely fastened
to each other and to the ceiling, and the ceiling must be capable of supporting five times the total weight of the installation.
1. Lower custom HB bracket onto top of projector. Ensure that triangle in bracket points towards front of projector. (See Figure 1)
2. Attach HB bracket to projector using four M6 x 16mm button head screws and four M6 flat washers through each corner of the HB bracket.
(See Figure 1)
Continued...
(1) BRACKET, Custom HB (4) NUT, Flange, Hex, 5/16-18
(4) SCREW, Button Head, M6 x 16mm (4) WASHER, Flat, M6
1
2
x 4
INSTALLATION INSTRUCTIONS
Continued
CAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical installations. A third assistant is
recommended.
Figure 2:
3. Attach VCM housing to your method of support and tighten firmly so the VCM housing is square to the screen.
4. With help of assistants, lift the projector and install it to the four studs extending from the VCM housing. Ensure that the VCM housing is
seated in slots on HB bracket. (See Figure 2)
5. Tighten the four 5/16" flange nuts. (See Figure 2)
4
5
VCM Housing
x 4
Seat VCM in HB
bracket slots
  • Page 1 1
  • Page 2 2

Chief HB-011E User manual

Chief
Brand
Chief
Model
HB-011E
Category
Mounting kits
Type
User manual
This manual is also suitable for

Chief HB-011E is a custom projector bracket designed to securely mount your projector to a ceiling. It features a triangle-shaped design that points towards the front of the projector for easy alignment, and four M6 x 16mm button head screws and four M6 flat washers for secure attachment. The bracket is compatible with VCM housings, which allow for flexible mounting options and easy projector installation. With a sturdy construction and durable materials, Chief HB-011E ensures reliable support for your projector, providing a stable and optimal viewing experience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents