Kenmore Elite 11027152600 Owner's manual

Brand: Kenmore Elite

Model: 11027152600

Category: Washing machines

Type: Owner's manual

This manual is also suitable for

Oasis

Automatic Washers

kavadoras autombticas

Laveuses automatiques

Models/Modelos/Modeles 110.2703#, 2704#, 2705#, 2715#

# = color number, nQmero de color, numero de couleur

Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com

8566937B Sears Canada Inc., Toronto, Ontario, Canada M5B 2B8 www.sears,ca

TABLEOF CONTENTS

PROTECTION AGREEMENTS ....................................................... 2

In the U.S.A ................................................................................... 2

In Canada ..................................................................................... 3

WARRANTY ..................................................................................... 3

WASHER SAFETY ........................................................................... 4

INSTALLATION REQUIREMENTS ................................................ 5

Tools and Parts ............................................................................ 5

Location Requirements ................................................................ 6

Drain System ................................................................................ 6

Electrical Requirements ................................................................ 7

INSTALLATION INSTRUCTIONS .................................................. 8

Before You Start ........................................................................... 8

Remove Shipping Base and Packing Ring .................................. 8

Connect Drain Hose ..................................................................... 8

Connect the Inlet Hoses ............................................................... 9

Secure the Drain Hose .............................................................. 10

Level the Washer ....................................................................... 10

Complete Installation ................................................................. 11

BENEFITS AND FEATURES ....................................................... 12

WASHER USE .............................................................................. 13

Starting Your Washer ................................................................ 13

Pausing or Restarting the Washer ............................................ 14

Stopping the Washer ................................................................. 14

Changing Cycles, Modifiers and Options ................................. 14

Status Lights .............................................................................. 15

Cycles ........................................................................................ 15

Modifiers .................................................................................... 16

Options ...................................................................................... 18

Operating Controls .................................................................... 18

Normal Sounds .......................................................................... 18

LAUNDRY TIPS ............................................................................ 19

WASHER CARE ........................................................................... 19

Cleaning Your Washer ............................................................... 19

Water Inlet Hoses ...................................................................... 19

Vacation, Storage and Moving Care ......................................... 19

TROUBLESHOOTING .................................................................. 20

SERVICE NUMBERS ............................................... BACK COVER

PROTECTION AGREEMENTS

Master Protection Agreements

Congratulations on making a smart purchase. Your new

Kenmore ®product is designed and manufactured for years of

dependable operation. But like all products, it may require

preventive maintenance or repair from time to time. That's when

having a Master Protection Agreement can save you money and

aggravation.

Purchase a Master Protection Agreement now and protect

yourself from unexpected hassle and expense.

The Master Protection Agreement also helps extend the life of

your new product. Here's what's included in the Agreement:

v' Expert service by our 12,000 professional repair specialists

v' Unlimited service and no charge for parts and labor on all

covered repairs

v' "No-lemon" guarantee - replacement of your covered

product if four or more product failures occur within twelve

months

v' Product replacement if your covered product can't be fixed

v' Annual Preventive Maintenance Check at your request - no

extra charge

v' Fast help by phone - phone support from a Sears technician

on products requiring in-home repair, plus convenient repair

scheduling

v' Power surge protection against electrical damage due to

power fluctuations

v' Rental reimbursement if repair of your covered product takes

longer than promised

Once you purchase the Agreement, a simple phone call is all that

it takes for you to schedule service. You can call anytime day or

night, or schedule a service appointment online.

Sears has over 12,000 professional repair specialists, who have

access to over 4.5 million quality parts and accessories. That's

the kind of professionalism you can count on to help prolong the

life of your new purchase for years to come. Purchase your

Master Protection Agreement today!

Some limitations and exclusions apply. For prices and

additional information, call 1-800-827-6655.

Sears Installation Service

For Sears professional installation of home appliances, garage

door openers, water heaters, and other major home items, in the

U.S.A. call 1-800-4-MY-HOME ®.

_ Oanadta

Maintenance Agreements

Your purchase has added value because you can depend on

Sears HomeCentraP for service• With over 2,400 Service

Technicians and more than a million parts and accessories, we

have the tools, parts, knowledge and skills to back our pledge:

We Service What We Sell.

Your Kenmore ®product is designed, manufactured and tested to

provide years of dependable operation. But like all products, it

may require service from time to time. The Sears Maintenance

Agreement offers you an outstanding service program, affordably

priced•

The Sears Maintenance Agreement

• Is your way to buy tomorrow's service at today's price

• Eliminates repair bills resulting from normal wear and tear

• Provides phone support from a Sears technician on products

requiring in-home repair

• Even if you don't need repairs, provides an annual Preventive

Maintenance Check, at your request, to ensure that your

product is in proper running condition.

Some limitations apply. For more information about Sears

Canada Maintenance Agreements, call 1-800-361-6665.

KENMORE ELITE®APPLIANCE WARRANTY

ONE YEAR LIMITED WARRANTY

When installed, operated and maintained according to all

instructions supplied with the product, if this appliance fails due

to a defect in material or workmanship within one year from the

date of purchase, call 1-800-4-MY-HOME ®to arrange for free

repair.

TEN-YEAR LIMITED WARRANTY ON STAINLESS STEEL

DRUM AND PLASTIC TUB

For ten years from the date of purchase, when this washer is

installed, operated and maintained according to all instructions

supplied with the product, Sears will replace the stainless steel

drum and/or plastic tub due to defective materials or

workmanship. After the first year, customer assumes any labor

costs associated with replacement of these parts.

If this appliance is used for other than private family purposes,

this warranty applies for only 90 days from the date of purchase.

THIS WARRANTY COVERS ONLY DEFECTS IN MATERIAL

AND WORKMANSHIP. SEARS WILL NOT PAY FOR:

1. Expendable items that can wear out from normal use,

including but not limited to filters, belts, light bulbs, and bags.

2. A service technician to instruct the user in correct product

installation, operation or maintenance•

3. A service technician to clean or maintain this product.

4. Damage to or failure of this product if it is not installed,

operated or maintained according to all instructions supplied

with the product•

5. Damage to or failure of this product resulting from accident,

abuse, misuse or use for other than its intended purpose•

6. Damage to or failure of this product caused by the use of

detergents, cleaners, chemicals or utensils other than those

recommended in all instructions supplied with the product.

7. Damage to or failure of parts or systems resulting from

unauthorized modifications made to this product.

DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF

REMEDIES

Customer's sole and exclusive remedy under this limited

warranty shall be product repair as provided herein. Implied

warranties, including warranties of merchantability or fitness for a

particular purpose, are limited to one year or the shortest period

allowed by law. Sears shall not be liable for incidental or

consequential damages• Some states and provinces do not allow

the exclusion or limitation of incidental or consequential

damages, or limitations on the duration of implied warranties of

merchantability or fitness, so these exclusions or limitations may

not apply to you.

This warranty applies only while this appliance is used in the

United States and Canada.

This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state•

Sears, Roebuck and Co.

Dept. 817WA, Hoffman Estates, IL 60179

Sears Canada Inc.

Toronto, Ontario, Canada M5B 2B8

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer follow basic precautions,

including the following:

[] Read all instructions before using the washer.

[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

[] Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

[] Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.

[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

this time.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation.

The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water

inlet hoses:

• Pliersthat open to 19/16'' • Flashlight (optional)

(3.95 cm)

Parts supplied:

Alternate Parts

Parts listed are available from your local Sears store or Sears

Service Center. For further information, call 1-800-4-MY-HOME ®

(1-800-469-4663}.

If You Have: You Will Need to Buy:

Laundry tub or Sump pump system (if not already

standpipe taller available)

than 96" (2.4 m)

B C

A. Drain hose form

B. Water inlet hoses (2)

C. Flat water inlet hose washers (4)

D. Beaded tie strap

1" (2.5 cm)

diameter standpipe

2" (5 cm) diameter to 1" (2.5 cm)

diameter standpipe adapter,

Part Number 3363920 and connector kit

Part Number 285835

Overhead sewer

Standard 20 gal. (76 L) 39" (99 cm) tall

drain tub or utility sink, sump pump and

connectors (available from local

plumbing suppliers)

Floor drain Siphon break, Part Number 285834;

additional drain hose,

Part Number 8318155 and connector kit,

Part Number 285835

Water faucets 2 longer water fill hoses:

beyond reach of fill 6 ft (1.8 m) Part Number 76314,

hoses 10 ft (3.0 m) Part Number 350008

Lint clogged drain Drain protector, Part Number 367031

Tools needed for securing the drain hose and leveling

the washer:

• Adjustable or open end • Wood block

wrench 9_6"(14 mm) • Ruler or measuring tape

• Level

Selectingtheproperlocationforyourwasherimproves

performanceandminimizesnoiseandpossiblewasher"wall<."

Yourwashercanbeinstalledinabasement,laundryroom,

closet,orrecessedarea.See"DrainSystem."

IMPORTANT:Donotinstallorstorethewasherwhereitwillbe

exposedtotheweather.

Properinstallationisyourresponsibility,

Youwillneed:

• Awaterheatersettodeliver120°F(49°C)watertothe

washer.

Agroundedelectricaloutletlocatedwithin4ft(1.2m)of

wherethepowercordisattachedtothebackofthewasher.

See"ElectricalRequirements."

Hotandcoldwaterfaucetslocatedwithin3ft(90cm)ofthe

hotandcoldwaterfillvalves,andwaterpressureof

20-100psi(138-690kPa)forbestperformance.

Alevelfloorwithamaximumslopeof1"(2.5cm)underentire

washer.Installingthewasheroncarpetingisnot

recommended.

Asturdyfloortosupportthewasherweight(washer,water

andload)of315Ibs(143kgs).

Donotstoreoroperateyourwasherintemperaturesatorbelow

32°F(0°C).Somewatercanremaininthewasherandcancause

damageinlowtemperatures.See"WasherCare"forwinterizing

information.

Installation spacing for recessed area and closet

installations

The following spacing dimensions are recommended for this

washer. This washer has been tested for installation with spacing

of 0" (0 cm) clearance on the sides. Recommended spacing

should be considered for the following reasons:

• Additional spacing should be considered for ease of

installation and servicing.

Additional spacing should be considered on all sides of the

washer to reduce noise transfer.

For closet installation with a door, minimum ventilation

openings in the top and bottom of the door are required.

Louvered doors with equivalent ventilation openings are

acceptable.

• Companion appliance spacing should also be considered.

olo

_8 in_*

(310 cm 2)" _

,2,

241n. ..__

1153cm2)

1"_ ._27,/_"m-_-__1"_ 1"*_27"÷i3"---1÷

(2.5 cm) (69.9 crn} (2,5 cm)(2.5 crn)(66.6 crn) (12,7 cm)

A B

J[_ 3"*

(7.6crn)

A. Front view

B. Side view

C. Closet door with vents

*Required spacing

The washer can be installed using the standpipe drain system

(floor or wall), the laundry tub drain system, or the floor drain

system. Select the drain hose installation method you need. See

"Tools and Parts."

Standpipe drain system--wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of

2" (5 cm). The minimum carry-away capacity can be no less than

17 gal. (64 L) per minute. A 2" (5 cm) diameter to 1" (2.5 cm)

diameter standpipe adapter kit is available. See "Tools and

Parts."

The top of the standpipe must be at least 39" (99 cm) high and no

higher than 96" (244 cm) from the bottom of the washer.

39"

(99 cm)

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. (76 L) capacity. The top

of the laundry tub must be at least 39" (99 cm) above the floor

and no higher than 96" (244 cm) from the bottom of the washer.

Floor drain system (view D)

The floor drain system requires a siphon break that may be

purchased separately. See "Tools and Parts."

The siphon break must be a minimum of 28" (71 cm) from the

bottom of the washer. Additional hoses might be needed.

• Donotgroundtoagaspipe.

• Checkwithaqualifiedelectricianifyouarenotsurethe

washerisproperlygrounded.

• Donothaveafuseintheneutralorgroundcircuit.

ElectricalShock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical

supply is required. A time-delay fuse or circuit breaker is

recommended. It is recommended that a separate circuit

serving only this appliance be provided.

This washer is equipped with a power supply cord having a

3 prong grounding plug.

To minimize possible shock hazard, the cord must be

plugged into a mating, 3 prong, grounding-type outlet,

grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility

and obligation of the customer to have the properly grounded

outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is

recommended that a qualified electrician determine that the

ground path is adequate.

GROUNDING INSTRUCTIONS

For a grounded, cord=connected washer:

This washer must be grounded. In the event of a malfunction

or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: Improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

INSTALLATION INSTRUCTIONS

5. Remove tape from lid. Open lid and remove foam packing

ring from washer tub. Keep foam packing ring in case you

need to move the washer in the future.

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

NOTE: To avoid floor damage during installation, set the washer

onto cardboard before moving across floor.

IMPORTANT:

• Be sure the foam shipping base has been removed from the

bottom of the washer as directed in the Unpacking

Instructions.

• Iffoam shipping base has not been removed, be sure lid is

secured with tape before laying washer on its back.

• Removing the foam shipping base is necessary for proper

operation.

1. Place cardboard supports from shipping carton on floor

behind washer for support.

2. Using 2 or more people, tip the washer onto its back and

place on cardboard supports.

3. Remove foam shipping base.

Proper connection of the drain hose protects your floors from

damage due to water leakage. Read and follow these

instructions.

The drain hose is connected to your washer and is stored inside

the washer cabinet.

Remove drain hose from washer cabinet

Pull the corrugated drain hose out of the washer by first grabbing

the pull tie. Continue to pull the hose until the end emerges. Do

not force excess drain hose back into the rear of the washer.

4. Set washer upright.

Laundry tub drain or standpipe drain

Connecting the drain hose form to the corrugated

drain hose

4.5"

(11.4 cm)

A. Drain hose reliefs

!. Feed end of drain hose into one end of form. Place end of drain

hose form into the drain hose relief.

2. Bend the hose over the top of the form and feed into the other end

of the form. Attach the other end of the form into the other drain

hose relief. The hose must extend 4V2" (11.4 cm) beyond the form.

To keep drain water from going back into the washer:

• Do not force excess drain hose into standpipe. Hose should

be secure but loose enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

Do not install the drain hose form on to the corrugated drain

hose. You may need additional parts. See Floor drain under

"Tools and Parts."

Insert new flat washers (supplied) into each end of the inlet

hoses. Firmly seat the washers in the couplings.

A B

A. Coupling

B. Washer

_YAYAYA_

Connect the inlet hoses to the water faucets

Make sure the washer basket is empty.

2. Attach the hose labeled hot to the hot water faucet. Screw

on coupling by hand until it is seated on the washer.

3. Attach the hose labeled cold to the cold water faucet. Screw

on coupling by hand until it is seated on the washer.

4. Using pliers, tighten the couplings with an additional

two-thirds turn.

Tighten thecouplings with anadditional two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the

valve. Damage to the valves can result.

Clear the water lines

• Run water through both faucets and inlet hoses, into a

laundry tub, drainpipe or bucket, to get rid of particles in the

water lines that might clog the inlet valve screens.

• Check the temperature of the water to make sure that the hot

water hose is connected to the hot water faucet and that the

cold water hose is connected to the cold water faucet.

Connect the inlet hoses to the washer

A. Hot water inlet valve

B.Cold water inlet valve

1. Attach the hot water hose to the inlet valve labeled hot.

2. Attaching one hose coupling first makes it easier to tighten

the connection with pliers.

3. Screwoncouplingbyhanduntilitisseatedonthewasher.

4. Usingpliers,tightenthecouplingwithanadditional

two-thirdsturn.

NOTE:Donotovertightenorusetapeorsealantsonthe

valve.Damagetothevalvescanresult.

Attach the cold water hose to the inlet valve labeled cold.

Screw on coupling by hand until it is seated on the washer.

Using pliers, tighten the coupling with an additional

two-thirds turn.

NOTE: Do not overtighten or use tape or sealants on the

valve. Damage to the valves can result.

Check for leaks

• Turn on the water faucets and check for leaks. A small

amount of water might enter the washer. You will drain this in

a later step.

NOTE: Replace inlet hoses after 5 years of use to reduce the

risk of hose failure. Record hose installation or replacement

dates for future reference.

• Ifyou connect only one water hose, you must cap off the

remaining water inlet port.

• Periodically inspect and replace hoses if bulges, kinks,

cuts, wear, or leaks are found.

oe_ '_?Pe D_> M ;_!;_

1. Drape the power cord over the console.

2. Remove any cardboard used to move washer.

qCP"

Beaded tie strap

Fasten the drain hose to the laundry tub leg or drain

standpipe with the beaded tie strap. See view A or B.

'._ i'

B C

If the washer faucets and the drain standpipe are recessed,

put the formed end of the drain hose into the standpipe.

Tightly wrap the tie strap around the water inlet hoses and the

drain hose. See view C.

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

One washer foot has been installed at a different height on your

new washer. The other three feet were preset at the factory.

Properly leveling your washer will minimize noise and vibration.

1. Slide the washer to its final location.

2. Push on upper front panel to be sure the washer is on its rear

feet.

Lower right front foot until it contacts the floor. By hand, firmly

rotate foot as much as an additional 11/2turns. The other three

feet have been preset at the factory.

Check the levelness of the washer by placing a level in the

crease between the top of the washer and the cabinet, first

on the front and then on the side.

1. Check the electrical requirements. Be sure that you have the

correct electrical supply and the recommended grounding

method. See "Electrical Requirements."

2. Check that all parts are now installed. If there is an extra part,

go back through the steps to see which step was skipped.

3. Check that you have all of your tools.

4. Keep the foam packing ring from the washer tub in case you

need to move the washer in the future. Dispose of/recycle all

packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

Level the front.

Level the side.

5. If the washer is not level, move the washer out slightly, tip

back, prop up the front of the washer on a wood block.

Adjust the feet up or down as necessary by twisting the feet.

Repeat steps 1 through 4 until washer is level.

6. Use a 9/16"or 14 mm open-end wrench to turn the Iocknut

counterclockwise on the foot tightly against the washer

cabinet.

IMPORTANT: If the Iocknut is not tight against the washer

cabinet, the washer may vibrate.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

7. Plug into a grounded 3 prong outlet.

8. Remove any protective film or tape remaining on the washer.

9. Read "Washer Use."

10. Totest and to clean your washer, measure 1/2of the detergent

manufacturer's recommended amount of powdered or liquid

detergent for a medium size load and pour it into the

detergent dispenser. Close the lid. Press POWER. Select a

normal cycle and press Start. Allow it to complete one whole

cycle.

BENEFITS AND FEATURES

Your washer has several benefits and features that are summarized here. Some items may not apply to your model.

Auto Water Level

This washer senses the load size and composition through a

series of fills and wash motion. It then adjusts the water level for

the best cleaning and rinsing performance. It eliminates the

guesswork. The water level is just right for every wash load size.

NOTE: You may notice during a cycle that the wash load is not

completely submerged in water. This is normal for your washer.

Auto Temperature Control (ATC)

The Auto Temperature Control (ATC) on this washer electronically

senses and maintains a uniform water temperature by regulating

incoming water temperatures. Using ATC will help dissolve

detergent.

Dispensers

The dispensers make your washer truly automatic. It is

unnecessary for you to return to the washer during the cycle to

add detergent, bleach, or fabric softener.

Laundry additives are added to the load at the proper time in the

wash cycle.

Stain Treat (CATALYST _ Cleaning Action)

The Stain Treat option helps to ensure better soil and stain

removal. Stain Treat reduces the need for pretreatment and is

safe for all fabrics. Water flushes through the dispenser to

dissolve the detergent. The detergent mixture is then sprayed

onto the load while the washer spins at low speed. This cleaning

action will last up to 5 minutes depending on the cycle selected.

The washer then stops spinning, fills with water to the

appropriate level and continues washing with the selected cycle.

Your new washer includes these features that help to reduce

noise, increase the ease of use and improve wash performance.

Electronic Controls

Electronic controls with preset cycles are easy to use whether

you are a beginner or an "expert."

Quiet Operation

This washer is insulated with sound-dampening materials to

reduce washer operation sounds and noises. On some models,

an additional tub wrap is added for superior vibration- and

sound-dampening.

Suspension System

To reduce washer "walk" and "out of balance" conditions, your

new washer combines:

• 4 Spring damper struts to isolate vibration

• Balance ring at the top and bottom of the wash basket to

minimize vibration

• Operating software designed to sense and correct off-

balance loads

Stainless Steel Basket

The stainless steel basket is corrosion resistant and enables

higher spin speeds for more water extraction, reducing drying

time.

Force Filter Wash/Rinse System

This washer filters 100% of the wash and rinse water. The water

is filtered then recirculated. The force filter traps sand and dirt,

flushing them down the drain, so they are not redeposited onto

the clean clothes.

Delay Start

Delay Start allows you to load your washer and pause the start of

the cycle for up to 9 hours.

End of Cycle Signal

The End of Cycle Signal produces an audible sound when the

wash cycle is finished. This signal is helpful when you are

removing items from the washer as soon as it stops.

WASHER USE

STATUS

AddAGarment

Soak

Rinse

CothesCean

Lid Lock0

Soil

Level

ADJUST_

WASH TIM

MODIFIERS

Auto TempControl

:Ho,Co,d

Auto :Warm/Warm

Kng Plus

:Warm/Cold

Large

Medium : Cool / Cold

Small C01d/Cold

OPTIONS

Auto Soak

2nd Rinse

Stain Treat

> Off

Water Wash / Rinse Cycle Signal

Level Temp

NOTE: Your washer model may vary from the model shown.

Fire Hazard

Never place items in the washer that are dampened

with gasoline or ether flammable fluids°

No washer can completely remove oil

Do not dry anything that has ever had any type of oil on

it (including cooking eils)o

Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

The following is a guide to starting your washer. Periodic

references to other sections of this manual provide more detailed

information.

Place a load of sorted clothes into the washer. See "Laundry

Tips."

• Load evenly to maintain washer balance. Mix large and

small items.

• Load only to the top of the basket as shown. Overloading

can cause poor cleaning. Items should move easily

through the wash water.

Pour measured powdered or liquid detergent into the

detergent dispenser. Do not put detergent directly into the

wash tub or onto clothes in the washer.

3. Add color-safe bleach (powdered or liquid) to this dispenser,

if needed. Be sure to match powdered color-safe bleach with

powdered detergent or match liquid color-safe bleach with

liquid detergent.

4. Pour measured liquid chlorine bleach into the liquid chlorine

bleach dispenser, if needed. Bleach is automatically

dispensed at the proper time during the wash cycle.

• Do not overfill. Do not dilute. Do not use more than 1 cup

(250 mL) for a full load. Use less with a smaller load size.

• Follow the garment and the chlorine bleach

manufacturer's directions for proper use.

• To avoid spilling, use a cup with a pouring spout. Do not

let bleach splash, drip, or run down into the washer basket.

• At the end of the cycle, a small amount of water may be

left in the dispenser. This is normal.

NOTE: Use only liquid chlorine bleach in this dispenser.

Pour measured liquid fabric softener into the fabric softener

dispenser, if desired.

• Do not overfill. The dispenser holds 4 oz (118 mL).

Concentrated fabric softener may be diluted with water

for a total of 4 oz (118 mL).

• Do not spill or drip any fabric softener onto the clothes.

NOTES:

• Use only liquid fabric softener in this dispenser.

• Do not use fabric softener dispensing balls in this washer.

Dispensing balls will not operate correctly with this

washer.

6. Close the washer lid.

7. Press POWER. This turns on the washer display.

8. Select a Wash Cycle. See "Cycles."

9. Adjust the Modifiers, if desired. See "Modifiers."

10. Select desired Options. See "Options."

11. Select Delay Start, if desired. See "Delay Start" in the

"Modifiers" section.

12. Press START. The wash cycle begins, and the display shows

the estimated remaining time. The lid will lock.

NOTE: If you do not press Start within 5 minutes of pressing

Power, the washer automatically shuts off.

Add A Garment

You can place additional clothing in the wash when the "Add A

Garment" status light is glowing without sacrificing wash

performance.

To add a garment or pause the washer at any time

1. Press STOP once.

2. Wait until the Lid Lock light turns off, then open the lid.

3. Add items.

To restart the washer

1. Close the lid and press START.

2. To unlock the lid after the Add A Garment period, press STOP

once. Pressing STOP twice will cancel the wash cycle, and

the washer will drain.

NOTE: If the cycle is canceled and the washer drains, your

laundry additives will be lost.

You can stop the wash cycle and drain the tub by pressing the

Stop button twice or the Power button once.

You can change Cycles, Modifiers and Options anytime before

Start is pressed. Not all Modifiers and Options are available for all

cycles.

• A short tone sounds when a change is selected.

• Three short tones sound if an unavailable combination is

selected. The last selection will not be accepted.

Changing Cycles during the wash cycle

1. Press STOP twice to cancel the cycle and drain the washer.

2. Press POWER.

3. Select the desired wash cycle.

4. Select the desired Modifiers and Options.

5. Press START.

The washer restarts at the beginning of the new cycle.

NOTE: If you do not press Start within 5 minutes of pausing the

washer, the washer automatically shuts off.

Changing Modifiers and Options during the wash cycle

You can change a Modifier or Option anytime before the selected

Modifier or Option begins. You must:

1. Press STOP once.

2. Select the desired Modifiers and/or Options.

3. Press START.

To manually drain the washer and spin the load

1. Press STOP twice to cancel the wash cycle and drain the

washer.

2. Press POWER.

3. Press DRAIN & SPIN.

4. Press START.

When the spin is complete, the lid unlocks. Items can be

removed from the washer.

These lights show which portion of the cycle the washer is

operating. They also indicate when you can add other garments

to the wash load.

STATUS

AddAGarment0

SoakC,3

Wash

Rinse

Spin

ClothesClean,

LidLock0

Clothes Clean

The Clothes Clean light stays on until the lid is opened or the

Stop or Power button is pressed.

Lid Lock

When the Lid Lock status light glows, the washer lid is locked.

NOTE:

• You must wait until the Lid Lock light turns off before the lid

can be opened.

Indicator lights

An indicator light shows which Cycle, Modifiers and Options you

have selected.

Estimated Time Remaining

Cycle time in minutes will appear in the display while you are

making selections. The total cycle time will appear, including an

estimated time for drain and fill times, once Start is pressed.

NOTES:

• The time is an estimation only and may vary depending on

load size, cycle, modifiers and options selected.

• You may notice the time adjusting during the cycle. This is

normal.

• The cycle time may be extended if oversudsing occurs or the

load is unbalanced.

Turn the knob to choose the right wash cycle for the type of

fabrics you are washing. When the knob points to a cycle, the

indicator light for the cycle will glow. If the default settings for the

Modifiers and Options are suitable for your wash load, you may

press Start to begin the wash cycle.

Casual/

Wrinkle Free

Normal_

Heaw.l \

Duty _._

Whitest S _

Whites

Darks /

Colors

_ Delicate

'U r wash

Preset Cycle Settings

For ease of use, preset cycle settings provide the recommended

fabric care settings for each cycle.

To use the preset cycle settings:

1. Press POWER.

2. Select the cycle you want by turning the knob. The preset

cycle settings will be displayed (see following chart).

NOTE: The times listed in the Preset Cycle Settings chart are

estimates. Preset cycle times may vary slightly depending on

your model.

3. Press START. The wash cycle will begin.

Preset Cycle Settings

Cycle Preset Soil Level* Wash/Rinse

Minutes Temp

Whitest Whites 66 Heavy Hot/Cold

(No ATC)

Heavy Duty 67 Heavy Hot/Cold

(No ATC)

Normal 40 Normal Warm/Cold

Casual/Wrinkle Free 38 Medium Warm/Cold

Darks/Colors 39 Normal Cool/Cold

Delicate 34 Medium Warm/Cold

Ultra Nandwash 34 Light Cool/Cold

Drain & Spin 12 Not Not

applicable applicable

*Cycle time in minutes will appear in the display while you are

making selections. The total cycle time will appear, including an

estimated time for drain and fill times, once Start is pressed.

NOTE: Load only to the top of the basket. Overloading can cause

poor cleaning. See "Starting Your Washer."

Whitest Whites

This cycle introduces liquid chlorine bleach to the load at the

proper time for improved whitening of your heavily soiled white

fabrics. Cycle combines high-speed wash action and high-speed

spin. The default option setting for this cycle is 2nd Rinse to

thoroughly remove detergent and bleach. For maximum soil and

stain removal, liquid chlorine bleach should be used.

Heavy Duty

Use this cycle for heavily soiled cotton or sturdy items. Cycle

combines high-speed wash action and high-speed spin. Stain

Treat is the default option for this cycle, but it may be turned off.

See "Changing Cycles, Modifiers and Options."

Normal

Use this cycle for normally soiled cottons and mixed fabric loads.

Cycle combines high-speed wash action and high-speed spin.

Casual/Wrinkle Free

Use this cycle to wash loads of no-iron fabrics such as sport

shirts, blouses, casual business clothes, permanent press and

blends. This cycle uses medium-speed wash action, a medium-

speed spin and a cool down process to reduce wrinkling.

Darks/Colors

Use this cycle for dark or highly dyed natural fabrics such as

jeans or other cotton items that may be susceptible to dye loss.

This cycle uses low to medium-speed wash action and high-

speed spin. For best results use cold or warm water.

Delicate

Use this cycle to wash lightly soiled garments indicating

"Machine Washable Silks" or "Gentle" cycle on the care label.

This cycle uses low-speed wash action and low spin speeds for

increased fabric care and less wrinkling.

Ultra Handwash

Use this cycle to clean lightly soiled special care garments or for

items labeled as "Machine Washable Wool." (Check label

instructions to make sure that the garment is washable.) This

cycle uses intermittent-low speed wash action and low-speed

spin for the gentlest fabric care with less wrinkling.

Garments are labeled "Handwash" because:

• The fiber construction may be sensitive to wash action.

• The fabric contains sensitive dyes that may bleed.

NOTE: Some "Handwash" items naturally shrink when washed.

Keep this in mind when you purchase items labeled "Handwash."

Items that shrink should be dried flat. When these items are still

wet, "block" them by gently stretching to the original

measurements.

Drain & Spin

An extra drain and spin may help shorten drying times for some

heavy fabrics or special-care items. Drain & Spin may also be

used for draining the washer after canceling a cycle or

completing a cycle after a power failure.

To use Drain & Spin setting:

1. Press DRAIN & SPIN button until the indicator light glows.

NOTE: A Drain & Spin time of approximately 12 minutes will

appear in the Estimated Time Remaining display.

2. Press START.

IMPORTANT: Water will dispense in the washer for a

moment, the lid will unlock, lock again, and then the Drain &

Spin cycle will continue. This is normal.

Modifiers allow you to further customize your cycles and save

energy.

Soil Level (Wash Time)

Soil level is preset for each cycle. See "Preset Cycle Settings" in

"Cycles." As you press the Soil Level pad, the cycle time

(minutes) will increase or decrease in the Estimated Time

Remaining display. To get the minimum wash time, press the pad

until the indicator light next to Light Soil Level illuminates. This is

the shortest wash time available for that cycle.

Heaw

Normal

: Medium

Light

Soil

Level

ADJUSTS

WASHTIME

For most loads, use the time recommended in the preset

cycle settings.

For heavy soil and sturdy fabrics, press Soil Level to select

more wash time, if needed.

For light soil and delicate fabrics, press Soil Level to select

less wash time, if needed.

Water Level

This washer automatically selects Auto for the water level when

the cycle is selected. The Auto feature senses the size of the load

and adds the correct amount of water for the load size. You can

also manually change the water level settings.

Auto

KingPlus

: Large

'i:::iii:;Medium

: Small

Water

Level

Wash/Rinse Temp

Select a water temperature based on the type of load you are

washing. Use the warmest wash water safe for fabrics. Follow

garment label instructions.

Warm rinses leave the loads drier and more comfortable to

handle. However, warm rinses may increase wrinkling. Cold

rinses may help with wrinkling and save energy.

Auto T_mpControl

Warm / Cod

Cool/ Cold

Cold/ Cold

Wash I Rinse

Temp

Temperature Guide

Wash Water Temperature Suggested Fabrics

Hot Whites and pastels

Warm Bright colors

Cold Darker colors that bleed or fade

NOTE: In wash water temperatures colder than 60°F (15.6°C),

detergents do not dissolve well. Soils may be difficult to remove.

Auto Temp Control

Auto Temp Control (ATC)electronically senses and maintains a

uniform wash and rinse water temperature. ATC regulates

incoming hot and cold water. The ATC is automatically turned On

when a cycle is selected. (See "Preset Cycle Settings" in

"Cycles.")

ATC is available with Warm/Warm, Warm/Cold and Cool/Cold

settings. The water temperature in the Hot/Cold and Cold/Cold

settings depend on the water temperature at the water inlet

faucets.

• ATC ensures consistent cleaning.

• Heated water consumes the largest amount of energy that a

washer uses.

• Today's detergents work well at temperatures above 60°F

(15.6°C).

Delay Start

You can use the Delay Start feature to delay the start of a wash

cycle for up to 9 hours (depending on your model).

1. Load the washer and fill the dispensers.

2. Close the washer lid.

3. Press POWER.

4. Select the desired Cycle, Modifiers and Options.

5. Press DELAY START. 1H (one hour) will be displayed in the

time display window. The indicator light for Delay Start will

glow.

Deb_y Start

For a longer delay time, press Delay Start. The Start time will

increase by 1-hour steps.

Press START. The countdown to the wash cycle will show in

the time display window and the Delay Start indicator light

will begin to flash.

NOTE: The Start indicator light will not flash when Delay Start

is chosen. You must press Start to initiate a countdown for

the cycle to begin.

To change the Delay Start time:

• Press STOR

• Press DELAY START to select the desired delay time.

• Press START to begin the countdown.

To cancel Delay Start:

Press START again to begin the cycle right away, or press

STOP twice to cancel the cycle.

Use these pads to select the desired options for your wash cycle.

OPTIONS

Auto Soak

2nd Rinse

Stain Treat

C_Off

Cycle Signal

2nd Rinse

A 2nd rinse can be used to aid in the removal of detergent or

bleach residue from garments. This option provides an additional

rinse with the same water temperature as the first rinse. This is

the default rinse setting for the Whitest Whites cycle. Fabric

softener will be dispensed during the 2nd Rinse.

Stain Treat (Catalyst ®Cleaning Action)

This option provides enhanced cleaning action for tough stains.

The Heavy Duty cycle automatically includes Stain Treat.

Choosing Stain Treat will add approximately 5 minutes to a cycle.

Stain Treat should be started on a dry load only and should not

be selected after the tub has started filling with water.

Stain Treat may be selected as an option with other cycles. See

table for details.

Cycle Stain Treat

(Adds time to the wash cycle)

Whitest Whites Option

Heavy Duty Default

Normal Option

Casual/Wrinkle Free Option

Darks/Oolors Option

Delicate Option

Ultra Handwash Option

Auto Soak

Use this option for set-in stains and soils that need extra time for

removal.

When Auto Soak is selected, the washer saturates the load with

water and detergent then pauses to allow the detergent to work

on soils. The pause is followed by a slow-speed spin. The washer

pauses and spins six times before advancing to the desired wash

cycle. Auto Soak adds approximately 12 minutes to the wash

cycle.

Cycle Signal

The End of Cycle Signal produces an audible sound when the

wash cycle is finished. This signal is helpful when you are

removing items from the washer as soon as it stops.

Power

Press POWER to turn the washer on or off.

Start

Press START to start your washer after a cycle has been

selected. Be sure all desired Modifiers and Options have been

selected. The lid must be closed for the washer to start.

Stop

Press STOP once to pause or stop the washer at any time. Press

START to continue the cycle. Press STOP twice to turn off the

washer. Press STOP once to unlock the lid and add a garment.

Your new washer may make sounds your old one didn't. Because

the sounds might be unfamiliar, you may be concerned about

them. These sounds may be normal.

During washing

If you select the Stain Treat option, you will hear a spin/spray

noise at the start of the cycle.

During drain

If water is drained quickly from your washer (depending on your

installation), you may hear air being pulled through the pump

during the end of draining.

During wash and spin

This washer does not have a transmission. The motor provides

direct drive for wash and spin. You will hear sounds that are

different from those of a conventional washer.

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of

your garments.

• Close zippers, snaps, and hooks to avoid snagging other

items. Remove pins, buckles, and other hard objects to avoid

scratching the washer interior. Remove non-washable trim

and ornaments.

• Empty pockets and turn them inside-out.

• Turn down cuffs; brush away lint and dirt.

• Turn synthetic knits inside-out to avoid pilling.

• Tie strings and sashes so they will not tangle.

• Mend tears, loose hems, and seams.

• Treat spots and stains.

• Stained or wet garments should be washed promptly for best

results.

Sorting

• Separate heavily soiled items from lightly soiled ones, even if

they would normally be washed together. Separate lint-givers

(towels, chenille) from lint-takers (corduroy, synthetics,

permanent press). When possible, turn lint-givers inside-out.

• Separate dark colors from light colors, colorfast items from

noncolorfast items.

• Sort by fabric and construction (sturdy cottons, knits, delicate

items).

Unloading

• Remove clothes from washer after the cycle is completed.

Metal objects such as zippers, snaps, and buckles may rust if

left in the washer basket for a long time.

WASHER CARE

Use a soft, damp cloth or sponge to wipe up any spills such as

detergent or bleach from the outside of your washer.

Clean your washer interior by mixing 1 cup (250 mL) of chlorine

bleach and 2 cups (500 mL) of detergent. Pour this mixture into

your washer and run it through a complete cycle using hot water.

Repeat this process if necessary.

Remove any hard water deposits using only cleaners labeled as

washer safe.

Cleaning the liquid fabric softener dispenser (on some

models):

1. Remove dispenser by grasping top with both hands and

squeezing, while pushing upward with thumbs.

2. Rinse dispenser under warm water, then replace it.

NOTE: Some models are equipped with a liquid fabric softener

dispenser. To avoid damage to the washer or clothing, do not

wash clothes with the liquid fabric softener dispenser removed or

add detergent or bleach to this dispenser; it is for liquid fabric

softener only.

@Tat( ,, te% ,,,,=;:,

Replace inlet hoses after 5 years of use to reduce the risk of hose

failure. Periodically inspect and replace inlet hoses if bulges,

kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, mark the date of replacement

on the label with a permanent marker.

Install and store your washer where it will not freeze. Because

some water may stay in the hoses, freezing can damage your

washer. If storing or moving your washer during freezing weather,

winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on

vacation or not using your washer for an extended period of time,

you should:

• Unplug washer or disconnect power.

• Turn off the water supply to the washer. This helps avoid

accidental flooding (due to a water pressure surge) while you

are away.

To winterize washer:

1. Shut off both water faucets.

2. Disconnect and drain water inlet hoses.

3. Put 1 qt (1 L) of R.V.-type antifreeze in the basket.

4. Run washer on the Drain & Spin setting for about 30 seconds

to mix the antifreeze and remaining water.

5. Unplug washer or disconnect power.

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Plug in washer or reconnect power.

Run the washer through a complete cycle without clothes,

using 1/2the normal recommended amount of detergent to

clean out the antifreeze.

To transport the washer:

1. Shut off both water faucets.

2. Disconnect and drain water inlet hoses.

3. If the washer will be moved during freezing weather, put 1 qt

(1 L) of R.V.-type antifreeze in the basket. Run washer on the

Drain & Spin setting for about 30 seconds to mix the

antifreeze and remaining water.

4. Disconnect the drain from the drain system.

5. Unplug the power cord.

6. Place the inlet hoses into the basket.

7. Drape the power cord and drain hose over edge into the

basket.

Place foam packing ring from the original shipping materials

in the top of washer. If you do not have the original foam

packing ring, place heavy blankets, towels, etc. into basket

opening. Close the lid and put apiece of tape over the lid and

down to the front of the washer.

Reinstalling the washer

1. Follow the "Installation Instructions" to locate, level and

connect the washer.

2. Run the washer through a complete cycle without clothes,

using 1/2the normal recommended amount of detergent to

clean out the antifreeze, if used.

TROUBLESHOOTING

First try the solutions suggested here and possibly avoid the cost of a service call...

'and ©o

Washer displaying code messages

• LF "LF" (Washer is taking too long to fill)

Check the following:

Are the water inlet hoses kinked or clogged?

Are the water inlet valve screens clear?

Press STOP to clear display.

• Ld "Ld" (Washer is taking too long to drain water from

the wash tub)

Check the following:

Is the drain hose kinked or clogged?

Is the drain hose installed properly? See "Connect the Drain

Hose." Press STOP to clear display.

• _L "uL" (Unbalanced Load)

Ifthe load is unbalanced, the washer will display this code

while running an imbalanced load correction routine at the

end of the wash cycle and before the final spin. If the code

remains and the wash cycle dial is flashing after the recovery

routine has stopped, open lid and redistribute the load. Close

lid and press START.

• oL "eL" (Over Load)

Is the washer overloaded? The washer has attempted to fill

and begin the wash cycle. If the washer is overloaded, it will

drain any water and detergent that was added during the fill.

To correct the overload, remove several items and add

detergent. Close lid and press START.

_d "Sd" (Suds Detected)

Check the following:

Did you add too much detergent? Always measure detergent.

Follow detergent manufacturer's directions.

If excessive suds are detected, the washer will display this

code while running a suds reduction correction routine at the

end of the wash cycle. The suds reduction routine removes

extra suds and assures proper rinsing of your garments. If the

code remains and the wash cycle dial is flashing after the

recovery routine has stopped, re-select your desired cycle

using cold water. Press START. Do not add detergent.

• I fd "lid" (Lid Opened)

Is the lid open? Close the lid to clear the display.

• HE "HC" (Cold and Hot hoses switched)

This code will appear at the end of the wash cycle to indicate

that the cold and hot water inlet hoses are switched. See

"Connect the Inlet Hoses."

• dL "dL" (Door/Lid cannot lock)

Indicates lid is not locked. Check for items caught in the lid

keeping it from closing. Press STOP once to clear the code.

• dL_ "dU" (Door/Lid cannot unlock)

Is there excessive weight on the lid, such as a basket of

laundry? Excessive weight will keep the lid from unlocking.

Press STOP once to clear the code.

• F__ "F##" code

Press STOP once to clear code. Press START. If code

appears again, call for service.

Page is loading ...

Kenmore Elite 11027152600 Owner's manual

Brand: Kenmore Elite

Model: 11027152600

Category: Washing machines

Type: Owner's manual

This manual is also suitable for

Download PDF

report

in other languages

français: Kenmore Elite 11027152600 Le manuel du propriétaire
español: Kenmore Elite 11027152600 El manual del propietario

Kenmore Elite 11027152600 Owner's manual

This manual is also suitable for

Kenmore Elite 11027152600 Owner's manual

in other languages

Related papers

Other documents