Installation:
An-Siphon Angle Sill Faucets
and Hose Bibbs
Installaon, Operaon & Maintenance Instrucons
4515 East 139th Street
Grandview, MO 64030
(800) 362-9055
Fax: (800) 362-1463
1. Determine the locaon for installaon of the angle sill faucet or
hose bibb. Be sure there is adequate work area on the interior of the
structure for securing the valve to the waterline.
2. PRIER angle sill faucets and hose bibbs are designed for installaon
with the handle in the “up” posion and the hose threads poinng in
the “down” posion.
3. Bore a 1” diameter hole through the wall in the desired posion. Feed
the supply line through the opening for installaon onto the angle sill
faucet or hose bibb.
4. If planning to solder the angle sill faucet or hose bibb to the supply
piping, the operang stem needs to be in the full open posion before
applying heat to the valve. Heang the valve may damage the sealing
surfaces on the stem of the angle sill faucet or hose bibb.
5. Flush all foreign parcles from the water line before connecng
the valve. Foreign parcles may clog the vacuum breaker/backow
preventor causing it to fail.
6. Secure the angle sill faucet or hose bibb to the supply piping using the
desired method. Test the installaon for leakage.
7. Secure the angle sill faucet to the structure using appropriate rust
resistant fasteners.
Rough-In Dimensions
Operation:
The operaon of a PRIER angle sill faucet
or hose bibb is simple. To open the valve,
turn the operator counterclockwise.
To close the valve, turn the operator
clockwise.
Do not overturn when opening or closing
the valve!
Maintenance:
PRIER angle sill faucets and hose bibbs
require no scheduled maintenance for
long wear life. The vacuum breaker/
backow preventor may require service
if there are suspended solids in the water
as they may clog the apparatus.
Note: See P-002 Installaon Operaon
and Maintenance Instrucons for more
details on vacuum breaker.
1
3
/
4
”
Model C-255/7
1
/
2
” FPT Inlet
NP-San
Nickel
CP-Polished
Chrome
3
/
4
” FPT Inlet
Model C-155/157
1
3
/
4
”
2
5
/
16
”
3
1
/
4
”
Model C-158
2
5
/
16
”
3
3
/
4
”
3
3
/
4
”
1
/
2
” MPT
Inlet
NP-San
Nickel
NP-San
Nickel
Model C-258
1
/
2
” MPT
Inlet
3
/
4
” MPT
Inlet
Stung Box
Packing (ST)
3
/
4
” MPT
Inlet
3
1
/
4
”
1
/
2
” FPT
Inlet
3
/
4
” FPT
Inlet
or
NP-San
Nickel
CP-Polished
Chrome
or
or
or
or
or
Model C-155BX
5
3
/
4
”
9
1
/
4
”
4
1
/
4
”
BX1 San Nickel
BX2 Rough Brass
or