All-Power APC4016 Owner's manual

Brand: All-Power

Model: APC4016

Category: Air compressors

Type: Owner's manual

2.5HP6GALLON

AIRCOMPRESSOR

FORTECHNICALSUPPORTPLEASE

AirCompressor

Tableof Contents

Topic

Safety Guidelines - Definitions

Hazard Warnings

Air Compressor

• Precautions

• Basic Air Compressor Components

• Assembling the Compressor

• Compressor Controls

• Electrical Power Requirements

• Breaking InThe Pump

• Operating Instructions

• Maintenance

• Storage

• Service

Troubleshooting

Glossary of Terms

Limited Warranty

Page

Owner'sManual

WARNING! READAND UNDERSTANDALL SAFETY PRECAUTIONSIN

THISMANUAL BEFORE OPERATING.FAILURE TO COMPLY WITH

INSTRUCTIONS IN THISMANUALCOULDRESULT IN PERSONAL

INJURY, PROPERTYDAMAGE,AND/OR VOIDINGOF YOUR

WARRANTY.ALL-POWERAMERICA WILL NOTBE LIABLEFOR ANY

DAMAGE BECAUSEOF FAILURE TO FOLLOW THESEINSTRUCTIONS.

Compressor Inspection

Prior to installation and usage, thoroughly inspect air compressor

for damage or flaws.

• Check tank, compressor, compressor motor and pump for

any signs of damage or corrosion.

• Check all screws, bolts, nuts and fasteners. Confirm that they

are secure.

• Confirm that all fittings, tank petcock and hardware are free

of paint, rust and corrosion.

• Confirm that all compressor settings are correct prior to

set-up and usage.

Air Tool Inspection

Prior to connecting to compressor and usage, thoroughly inspect

each air tool for damage or flaws.

• Check entire tool assembly for any signs of damage or

corrosion.

• Check all assembly screws, bolts, nuts and fasteners and

confirm that they are secure.

• Confirm that all fittings, bits and hardware for integrity.

• Confirm that tool settings are correct prior to connection and

usage.

AirCompressor

SafetyGuidelines- Definitions

This manualcontains important informationthat you need to know and

understand in order to protect YOUR SAFETY and to PREVENT

EQUIPMENT PROBLEMS. The following symbols help you recognize this

information. Please read the manual and pay attention to these sections.

WARNING!WARNINGSINDICATEA CERTAINTYORSTRONG

POSSIBILITYOFPERSONALINJURYORDEATHIFINSTRUCTIONS

ARENOTFOLLOWED.

A_ CAUTION: CAUTIONS INDICA TE A POSSIBILITY OF

EQUIPMENT DAMAGE IF INSTRUCTIONS ARE NOT

FOLL 0 WED.

Note: Notes give helpful information.

WARNING!IMPROPEROPERATIONORMAINTENANCEOFTHIS

PRODUCTCOULDRESULTINSERIOUSINJURYANDPROPERTY

DAMAGE.READANDUNDERSTANDALLWARNINGSANDOPERATING

INSTRUCTIONSBEFOREUSINGTHISEQUIPMENT.WHENUSINGAIR

TOOLS,BASICSAFETYPRECAUTIONSSHOULDALWAYSBE

FOLLOWEDTOREDUCETHERISKOFPERSONALINJURY.

SaveTheseImportantSafety

Instructions!

Read and understand all ofthese safety instructions. Be

sure to retain them for future use.

Owner'sManual

HazardWarnings

Dust

WARNING!SOMEDUSTCREATEDBYPOWERSANDING,SAWING,

GRINDING,DRILLING,ANDOTHERCONSTRUCTIONACTIVITIES

CONTAINSCHEMICALSKNOWNTOTHESTATEOFCALIFORNIATO

CAUSECANCER,BIRTHDEFECTSOROTHERREPRODUCTIVEHARM.

These chemicalsmay include (but are not limitedto) the following:

• Leadfrom lead-based paints

• Crystalline silica from bricks and cement and other masonry products

• Arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, always wear

MSHA/NIOSH approved, properly fitting face masks or respirators when

using such tools.

Always follow basic safety precautions when using air tools to reduce the

risk of personal injury.

Bursting

Rust can weaken the tank. Drain the condensed water from the tank after

each use to reduce rusting. If a leak is detected in the tank, replace the tank

immediately. Do not weld, drill or modify the air tank of this compressor.

Welding or modifications on the air compressor tank can severely impair

tank strength and cause an extremely hazardous condition. Welding or

modifying the tank in any manner will void the warranty.

Check the manufacturer's maximum pressure rating for air tools and

accessories. Compressor outlet pressure must be regulated so as to never

exceed the maximum pressure rating of the tool. Relieve all pressure

through the hose before attaching or removing accessories.

Do not adjust the pressure switch or relief valve for any reason. Doing so

voids all warranties. They have been preset at the factory for the maximum

pressure of this unit. Personal injury and/or property damage may result if

the pressure switch or the relief valve are tampered with.

Do not use plastic or pvc pipe for compressed air. Use only galvanized steel

pipe and fittings for compressed air distribution lines.

AirCompressor

HazardWarnings(cont'd)

RiskofEyeor HeadInjury

What could happen:

• Air powered equipment and power tools are capable

of propelling materials such asfasteners, metal chips,

saw dust, and other debris at high speed, which could

resultin seriouseye injury.

• Compressedair can be hazardous.The air stream

can cause injuryto softtissueareas such as eyes,

ears, etc. Particlesor objectspropelledbythestream

can cause injury.

• Toolattachmentscan become looseor breakand fly

apart propellingparticlesat theoperatorand othersin

thework area.

How toprevent it:

• Alwayswear ANSI approvedZ87.1 safety glasses withside shields.

• Neverleaveoperatingtoolunattended.Disconnectair hosewhen toolis

notin use.

• Foradditionalprotection, usean approvedface shieldin additionto

safety glasses.

• Make surethat anyattachmentsare securelyassembled.

• Neverpointanynozzle or sprayertowarda personor any partofthe

body.Equipmentcan cause seriousinjuryifthe spray penetratesthe

skin.

Owner'sManual

HazardWarnings(cont'd)

RiskofFireorExplosion

What could happen:

• Abrasive tools such as sanders and grinders, rotating

tools such as drills, and impact tools such as nailers,

staplers, wrenches, hammers, and reciprocating saws

are capable of generating sparks which could result in

ignition of flammable materials.

• Itis normal for the compressor motor and pressure

switch to produce sparks while operating. If sparks

come into contact with vapors from gasoline or other

solvents, they may ignite, causing fire or explosion.

• Exceeding the maximum pressure rating of tools or

accessories could cause an explosion resulting in

serious injury.

How to prevent it:

• Never operate tools near flammable substances such as gasoline,

cleaning solvents, etc.

• Work in a clean, well ventilated area free of combustible materials.

• Neveruseoxygen, carbondioxide or otherbottled gasesas a power

source for air tools.

• Usecompressedair regulatedto maximumpressure at or below the

ratedpressureof anyattachments.

• Neverconnectto anair sourcethatis capableofexceeding200 psi.

• Alwaysverify priorto usingthetoolthatthe air sourcehasbeen

adjustedtothe rated air pressure range.

• Neversprayflammable liquidsin a confinedarea. Do not spraywhere

sparksor flame are present.

• Donotsmokewhilespraying.

• Keepcompressor as far from spray area as possible.

AirCompressor

HazardWarnings(cont'd)

RiskofHearingLoss

What could happen:

• Longterm exposure to noise produced from the

operation of air tools can lead to permanent hearing

loss.

How to prevent it:

Always wear ANSI $3.19 hearing protection when usinga compressor.

HazardRiSkto Breathing/Inhalation

What could happen:

• Abrasive tools such as grinders, sanders, and cut-off

tools generate dust and abrasive materials which can

be harmful to human lungs and respiratory system.

• Some materials suchas adhesives and tar contain chemicals whose

vapors could cause serious injury with prolonged exposure.

How to prevent it:

• Always wear MSHA/NIOSH approved, properly fitting face mask or

respirator when using such tools. Read all instructions and be sure that

your respirator mask will protect you.

• Always work in a clean, dry, well ventilated area.

• Neverdirectly inhalethe compressed airproduced by a compressor. It is

not suitable for breathing purposes.

• Becertain to read all labels when you are spraying paints or toxic

materials, and follow the safety instructions.

Owner'sManual

HazardWarnings(cont'd)

RiskofInjury

What could happen:

• Tools leftunattended,or with theair hoseattached

can be activated by unauthorized persons leading to

their injury and/or injury to others.

• Air tools can propel fasteners or other materials

throughout the work area.

• A wrench or key that is left attached to a rotating part

of the tool increases the risk of personal injury.

• Using inflator nozzles for duster applications can

cause serious injury.

• Air toolscanbecome activatedby accident during

maintenance or tool changes.

• Air tools can cause the work-piece to move upon

contact leading to injury.

• Loss of control of the tool can lead to injury to self or

others.

• Poorquality, improper, or damaged tools such as

grinding wheels, chisels, sockets, drills, nailers,

staplers, etc., can fly apart during operation,

propelling,particles throughout the work area causing

senousinjury.

• Fasteners could ricochet or be propelled causing

serious injury or property damage.

• Improperly maintained tools and accessories can

cause seriousinjury.

• There is a riskof burstingifthetoolis damaged.

• The compressor unitstartsautomatically.Serious

injurycouldoccurfrom contact with movingparts.

AirCompressor

HazardWarnings(cont'd)

RiskofInjury(cont'd)

How toprevent it:

• Remove air hose when toolisnot inuse and storetool in securelocation

away from reach ofchildrenand or untrainedusers.

• Useonlyparts,fasteners,and accessoriesrecommendedbythe

manufacturer.

• Keepworkarea clean and free ofclutter. Keep childrenand others

away from workarea duringoperationof thetool.

• Keepworkarea well lit.

• Removeadjustingkeysand wrenchesbeforeturningthe toolon.

• DO NOT use inflatornozzlesfor dusterapplications.

• Removeair hoseto lubricateor add grindingattachments,sanding

discs,drills,etc.to the tool.

• Nevercarrythetool bythe hose.

• Avoidunintentionalstarting.

• Repairservicingshouldbe doneonlyby an authorizedservice

representative.

• Useclampsor otherdevicesto preventmovement.

• Neveroperatetoolwhileunderthe influenceofdrugsor alcohol.

• Don'toverreach. Keep properfooting and balanceof alltimes.

• Keephandlesdry,clean andfree from oil and grease.

• Stay alert. Watchwhat you are doing. Use common sense. Do not

operatetoolwhen you are tired.

• Always usetoolattachmentsrated for the speed ofthe powertool.

• Neverusetoolswhichhavebeen dropped,impactedor damaged by

use.

Owner'sManual

HazardWarnings(cont'd)

RiskofInjury(cont'd)

• Useonly impact grade socketson an impactwrench.

• Do not apply excessive force to the tool. Letthe tool perform the work.

• Neverpointdischargeoftoolat selfor others.

• Donotpulltriggerunlesstoolcontactsafetydevice isagainstwork

surface.

• Neverattemptto drivefasteners intohardsurfacessuchas steel,

concrete,or tilewhen usingairtools.

• Takecare to avoiddrivinga fastener on top ofanotherfastener.

• Positiontoolcarefullysothat fasteners willbedeliveredtothe proper

location.

• Useonly accessoriesidentifiedbythe manufacturerto be used with

specifictools.

• Maintainthetoolwithcare.

• Keepacuttingtoolsharpandclean. A properlymaintainedtool,with

sharpcuttingedges reducesthe riskof binding and iseasierto control.

• Check for misalignment of bindingor movingparts,breakageof parts,

and anyotherconditionthateffectsthe tool'soperation.Ifdamaged,

havethetoolservicedbeforeusing.

• Useof an accessorynotintendedfor use withthespecifictools

increasesthe riskof injuryto persons.

• Alwaysshut offthe compressor,removethe plugfrom the outlet,and

bleedall pressurefrom the systembeforeservicingthecompressor,and

when the compressoris notin use.

• Donotoperatethe unitwiththe shroudremoved.

AirCompressor

HazardWarnings(cont'd)

Riskof ElectricShock

What could happen:

• Using air tools to attach electrical wiring can result in

electrocution or death.

• Improper electrical connections can result in

fires,electrocution, or death.

This tool is not provided with an insulated gripping surface. Contact with

a "live" wire makes exposed metal tool parts "live", resulting in possible

electrocution or death.

Fasteners coming in contact with hidden electrical wiring could cause

electrocution or death.

How to prevent it:

• Never attach electrical wiring with energized tools.

• Avoid body contact with grounded surfaces such as pipes, radiators,

ranges, and refrigerators. There is an increased risk of electric shock if

your body is grounded.

• Thoroughly investigate the work piece for possible hidden wiring before

performing work.

• A licensed electrician in accordance with all local and national codes

must install all wiring.

• Never use an electric air compressor outdoors when it is raining or on a

wet surface, as it may cause an electric shock.

Owner'sManual

HazardWarnings(cont'd)

RiskofEntanglement

What could happen:

• Tools containing moving elements or driving other

moving tools (grinding wheels, sockets, sanding

discs, etc.) can become entangled in hair, clothing,

jewelry, and other loose objects, resulting in injury.

How to prevent it:

Neverwear loose fitting clothes,or apparel whichcontains loosestraps

or ties, etc. which could become entangled in moving parts.

Remove any jewelry, watches, identifications, bracelets, necklaces, etc.

which might become caught by the tool.

Keep hands away from moving parts. Tie up or cover long hair.

AirCompressor

HazardWarnings(cont'd)

Riskof Cutor Burns

What could happen:

• Tools which cut, shear, drill, staple punch, chisel, etc.

are capable of causing serious injury.

• The pump and manifold generate high temperatures.

How to prevent it:

Keep the working part of the tool away from hands and body.

• Do not touch the pump, manifold or transfer tube while the pump is

running.Allowthem to cool before handling or servicing.

• Keep children away from the compressor at all times.

Owner'sManual

Compressor

Item Value

Model Number APC4016

Peak H.P.(CV) 3.5

Tank Capacity 6

Gallons/Liters

Voltage/Amps/Phase 115/2.6/1

Kick-In Pressure 80

Kick-Out Pressure 100

WARNING! THE POWER CORDON THISPRODUCT CONTAINSLEAD,

A CHEMICAL,KNOWN TO THE STATE OF CALIFORNIATO CAUSE

CANCERAND BIRTH DEFECTS OR OTHER REPRODUCTIVEHARM.

WASHHANDSAFTER HANDLING.

Precautions

• Drain the moisture from thetankdaily to help prevent corrosion.

• Pullthe pressurereliefvalve ringdailyto ensureproper function and

clear possible obstructions.

• To provideproperventilationfor cooling,thecompressormustbe keptat

least12 inches(31 cm) from the nearestwall, in a well-ventilatedarea.

• Fastenthe compressorsecurelyand releasetank pressurebefore

transporting.

• Protectthe air hose and electriccordfrom damage and puncture.

Inspectthemweekly for weak orwornspots,and replace ifnecessary.

• To reducethe riskof electricshock,do notexpose to rain. Store indoors.

• Neveroperatethe compressorifthe powercordor plugare damaged.

Take theequipmentto the nearestAuthorized Service Center, and a

specialisttechnicianwillreplace it.

Owner'sManual

Compressor(cont'd)

BasicAir CompressorComponents

The basic componentsofthe air

compressorare theelectricmotor,pump,

pressureswitch,and tank.The electric

motor(see A) powersthe pump.The

electricmotoris equippedwith an

overloadprotectorand an automatic

reset. Ifthe motorbecomes overheated,

the overloadprotectorwillshut itdownto

preventdamage to the motor.When the

motorsufficientlycools, itwill

automaticallyrestart.

A&B

The pump (see B) compressesthe air

and discharges itintothe tank.

The tank (see C) stores the compressed

air.

The pressure switch(located internally)shutsdown the motor and relievesair

pressureinthe pumpand transfertube when theair pressurein the tank

reachesthe kick-out pressure. As compressedair is usedand the pressure

level in thetankdropstothe kick-inpressure,the pressureswitchrestartsthe

motorautomatically,withoutwarning,and the pumpresumescompressingair.

AssemblingtheCompressor

1 Unpack the air compressor.Inspectthe unitfor damage. Ifthe unithas

been damaged in transit,contact the carrier and completea damage

claim.Do this immediatelybecause there are time limitationsto

damaged claims.The carton shouldcontain:

o Air compressor

,o Operator and parts manuals

,_ Handle

o Wheel Assembly

AirCompressor

Compressor(cont'd)

AssemblingtheCompressor(cont'd)

Tightenthe handleintoitsposition

with screwsincluded.

Check the compressor's serial labelto ensure thatyou have received

the model ordered, and that it has the required pressure rating for its

intended use.

Locatethe compressor accordingto the following guidelines:

a Position the compressor near a grounded electrical outlet (see

GROUNDING INSTRUCTIONS, above).

b The compressor must be at least 12 inches (31 cm) from any wall or

obstruction, in a clean, well-ventilated area, to ensure sufficient air

flow and cooling.

c In cold climates,storeportable compressorsina heated building

when notin use. Thiswillreduceproblemswith motorstartingand

freezingofwater condensation.

d Removethe compressorfrom theshippingpalletor cartonand place

itonthe flooror a hard, level surface.The compressormustbe level

to ensureproperdrainageof the moistureinthe tank.

Connect an air hose tothe compressorhoseoutlet.

Owner'sManual

Compressor(cont'd)

CompressorControls

• Power switch: This switchturns the compressorpowerON and OFF.

• Pressure switch : Thisswitchturnson the compressor.Itisoperated

automaticallywhen the powerswitchisin the ON position,itallowsthe

compressor tostartup or shutdownautomatically,withoutwarning,

dependinguponair demand.

• Pressure Relieve Valve: If the pressureswitchdoes not shutdown

the motorwhen pressurereachesthe preset level,thisvalvewill

popopenautomaticallyto preventover pressurization.To operate

manually,pullthe ringon the valveto relieve air pressureinthe tank.

• Tank Pressure Gauge: Thisgauge measures the pressurelevelofthe

air storedinthe tank. Itisnotadjustablebythe operator,and does not

indicatelinepressure.

• Air Pressure Regulator : Thisair pressureregulatorenablesyou to

adjustlinepressuretothe toolyou are using.

WARMNG!NEVEREXCEEDTHEMAXIMUMWORKINGPRESSUREOF

THETOOL.TURNTHEKNOBCLOCKWISETOINCREASEPRESSURE,

ANDCOUNTERCLOCKWISETODECREASEPRESSURE.

AirCom

Compressor(cont'd)

CompressorControls(cont'd)

• Regulated pressure gauge: This gauge measuresthe regulated

outletpressure.

• Regulated pressure quick connect coupler: This couplerconnects

to the regulatedoutletpressure.Toconnect air hose, pushcouplerin.

Todisconnectair hose,pullthe couplercollarback and separate the coupling.

ElectricalPowerRequirements

ElectricalWiring

Refer to the air compressor's seriallabelforthe unit'svoltageand

amperage requirements.

Use a dedicatedcircuit.Forbest performanceand reliablestarting,the air

compressor mustbe pluggedintoa dedicated circuit,as closeas possible

tothefuseboxor circuitbreaker.The compressor willusethefull capacityof

a typical15 amp householdcircuit.Ifotherdevicesare on the same circuit,

the compressormay fail tostart. Lowvoltageor an overloadedcircuitcan

resultinsluggishstartingthat causesthe motoroverloadprotectionsystem

circuitbreaker totrip, especiallyincoldconditions.

Note: A circuitbreaker is recommended.If theair compressor is

connectedtoa circuitprotected bya fuse, usedualelement time

delay fuses(Buss Fusetrontype "1" only).

Note: Avoid use of extensioncords.If using an extensioncord

is necessary, be sure to use an extension with the correct

specifications.

For optimum performance, plug the compressor powercord directlyintoa

groundedwall socket.Do not usean extensioncord unlessabsolutely

necessary.Instead,use a longerair hoseto reach thearea where the air is

needed.

If useofan extension cord cannotbe avoided,thecord should be no longer

than 100 feet and be a minimum wire size of 14 gauge (AWG).

Owner'sManual

Compressor(cont'd)

ElectricalPowerRequirements(cont'd)

ExtensionCord

Use the chart on the rightfor

the proper extension cord length.

Useonlya 3-wire extension cord

that has a 3-blade groundingplug,

and a 3-slot receptaclethatwillac-

cept theplugof theproduct.Make

sure yourextensioncord isin good

condition. An undersizedcordwill

cause a drop in linevoltageas well

as a lossof powerand overheating.

The smallerthe gauge number,the

heavierthe cord.

Amp Length of

Rating Cord in Feet

(120Volts) 25' I 50' 100' t50'

10-12 16 I 14 10 8

12-14 16 I 12 10 8

14-16 16 I 12 10 8

16-18 14 I 12 8 8

18-20 14 I 12 8 8

GroundingInstructions

This product shouldbe grounded.In the eventof an electricalshortcircuit,

groundingreducesthe riskofelectricshockbyprovidingan escapewire for

the electriccurrent.

This product isequipped with a cord having a grounding wire withan

appropriategroundingplug.The plugmustbe pluggedintoan outletthat is

properlyinstalledand groundedinaccordancewithall localcodesand

ordinance.

_k ARNING!IMPROPERINSTALLATIONOFTHEGROUNDINGPLUG

CANRESULTINA RISKOFELECTRICSHOCK.IF REPA/ROR

REPLACEMENTOFTHECORDORPLUGISNECESSARY,DONOT

CONNECTTHEGROUNDINGWIRETOEITHERFLATBLADETERMINAL.

THEWIREINSULATIONHAVINGANOUTERSURFACETHATISGREEN

WITH,ORWITHOUT,YELLOWSTRIPESISTHEGROUNDINGWIRE.

This product isfor use on a nominal 110 voltcircuit. An outlet with a ground-

ing plug must be used.

Make sure thatthe productisconnectedto an outlethaving the same con-

figurationas the plug.No adaptershouldbe usedwith thisproduct.

Do not alter the plug to fit into a non-grounded or 2-slot receptacle.

Page is loading ...

All-Power APC4016 Owner's manual

Brand: All-Power

Model: APC4016

Category: Air compressors

Type: Owner's manual

Download PDF

report

All-Power APC4016 Owner's manual

All-Power APC4016 Owner's manual

Related papers

Other documents