Alloy LED AL980312020 Installation guide

Type
Installation guide

This manual is also suitable for

page 1 of 1 v2.1
Before commencing any installation or maintenance work, disconnect the driver from AC
power entirely.
Keep proper ventilation around the driver and do not stack any objects on it. Maintain 4-6
inches clearance when the driver is adjacent to a heat source.
Installing this driver in a high ambient temperature environment may increase the internal
component temperature and will require a derating in output current.
The current rating of an approved primary /secondary cable should be greater than or equal to
that of the unit. Please refer to the driver’s specification sheet.
When using wet location models of this driver to power LED lighting with wet location
connectors, verify that the connection between the driver and the lighting fixture is watertight.
Safety & Tips
Primavolt
®
Dimmable Driver
Installation Guide
Quick Specs
Input: 120V / 240V AC
Max. load: 100%
Min. load:
60% (w/dimmer)
none (on/off-no dimmer)
DC Output
AC Input
(V+)
(V-)
N
L
PrimaVolt Dry Location
DRIVER
DIMMER
(White)
(Black)
(-)
(+)
90-135V AC
DC OutputAC Input
(V+)
(V-)
N
L
(White)
(Black)
(Red)
(Black)
PrimaVolt Wet Location
DIMMER
DRIVER
TAPE LIGHT
(-)
(+)
90-135V AC
Dry Location
Wet Location
®
®
Specifications subject to change without notice.
www.AlloyLED.com | Call: 800.910.LEDS [5337] | Text: 510.400.6690 | [email protected]
  • Page 1 1

Alloy LED AL980312020 Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI