Alloy LED AL-980312045 Installation guide

Brand
Alloy LED
Model
AL-980312045
Type
Installation guide

This manual is also suitable for

page 1 of 1 v2.1
• Before commencing any installation or maintenance work, disconnect the driver from AC
power entirely.
• Keep proper ventilation around the driver and do not stack any objects on it. Maintain 4-6
inches clearance when the driver is adjacent to a heat source.
• Installing this driver in a high ambient temperature environment may increase the internal
component temperature and will require a derating in output current.
• The current rating of an approved primary /secondary cable should be greater than or equal to
that of the unit. Please refer to the driver’s specification sheet.
• When using wet location models of this driver to power LED lighting with wet location
connectors, verify that the connection between the driver and the lighting fixture is watertight.
Safety & Tips
Primavolt
®
Dimmable Driver
Installation Guide
Quick Specs
Input: 120V / 240V AC
Max. load: 100%
Min. load:
60% (w/dimmer)
none (on/off-no dimmer)
DC Output
AC Input
(V+)
(V-)
N
L
PrimaVolt Dry Location
DRIVER
DIMMER
(White)
(Black)
(-)
(+)
90-135V AC
DC OutputAC Input
(V+)
(V-)
N
L
(White)
(Black)
(Red)
(Black)
PrimaVolt Wet Location
DIMMER
DRIVER
TAPE LIGHT
(-)
(+)
90-135V AC
Dry Location
Wet Location
®
®
Specifications subject to change without notice.
www.AlloyLED.com | Call: 800.910.LEDS [5337] | Text: 510.400.6690 | [email protected]
  • Page 1 1

Alloy LED AL-980312045 Installation guide

Brand
Alloy LED
Model
AL-980312045
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents