Brandt EFE110A Owner's manual

Brand: Brandt

Model: EFE110A

Category: Tumble dryers

Type: Owner's manual

This manual is also suitable for

EFE118A

EN INSTALLATION & OPERATING INSTRUCTIONS

Vented tumble dryer

Dear Customer,

You have just acquired a

BBRRAANNDDTT

dryer and we would like to thank you.

We have invested all our dedication and know-how in this appliance so that it would

best meet your needs. With innovation and performance, we designed it to be always

easy to use.

In the

BBRRAANNDDTT

product range, you will also find a wide choice of ovens, microwaves,

cooking hobs, ventilation hoods, cookers, dishwashers, washing machines,fridges and

freezers, that you can coordinate with your new

BBRRAANNDDTT

dryer.

Visit our website

wwwwww..bbrraannddtt..ccoomm

where you will find all of our products, as well as

useful and complementary information.

BBRRAANNDDTT..

As part of our commitment to constantly improving our products, we reserve the right to make

changes to them based on technical advances to their technical and functional features and

appearance.

Warning :

Before installing and using your appliance, please carefully read this

Guide to Installation and Use, which will allow you to quickly familiarise your-

self with its operation.

1 / FOR THE USER’S ATTENTION

• Safety instructions ______________________________________ 4

• Protection of the environment ____________________________ 5

2 / DESCRIPTION OF YOUR APPLIANCE

• General presentation of the tumble dryer __________________ 6

3 / INSTALLING YOUR TUMBLE DRYER

• The appliance’s surroundings ____________________________ 7

• Levelling ______________________________________________ 7

• Venting the air __________________________________________ 8

• Modifying the air outlet __________________________________ 9

• Built-under installation____________________________________ 10

• Combined washer/dryer installation ________________________ 10

• Modifying the door opening direction ______________________ 10

• Electrical connection ____________________________________ 11

4 / PREPARING YOUR ITEMS

• Checking the condition of your textiles______________________ 12

• Inserting the items in the drum ____________________________ 12

5 / PROGRAMMING

• Presentation of the control panel __________________________ 13

• Programming a drying cycle ______________________________ 13

• Drying times____________________________________________ 14

6 / REGULAR MAINTENANCE

• Cleaning the filter ______________________________________ 15

• Cleaning the appliance __________________________________ 15

7 / TROUBLESHOOTING ______________________________________ 16

8 / AFTER-SALES SERVICE ____________________________________ 17

CONTENTS

1 / FOR THE USER’S ATTENTION

Important :

Keep these operating instructions with

your appliance. If you should sell your

machine or give it to someone else, ensure

that the operating instructions go with it.

Please take note of these safety instructions

before installing and using your appliance.

They have been drawn up for your safety and

that of others.

•SAFETY INSTRUCTIONS

•

Installation

— When you take delivery of the appliance,

unpack it or have it unpacked immediately.

Check that it has not suffered any damage

during transport. Express any reservations in

writing on the delivery note and keep a copy.

Never connect up a damaged appliance.

If your appliance is damaged, please contact

your dealer.

— Before proceeding to connect up your

appliance, please refer to the Installation

Instructions.

— Your tumble dryer must be kept disconnec-

ted from the mains supply throughout the

whole installation process.

— Never connect the vent hose to a chimney

flue (risk of combustion gas backflowing) or a

mechanical ventilation system.

— The electrical connection details shown on

your appliance’s information plate must match

the those of the local mains supply.

— Once your appliance has been installed, the

plug must remain accessible.

— Do not alter or try to alter this appliance’s

characteristics. This could be dangerous for

you.

— If your installation requires alteration, only

entrust the electrical and plumbing work to

appropriately qualified electricians and plum-

bers.

— The appliance must not be installed behind a

locking door, a sliding door or a door with hin-

ges on the opposite side to those on the dryer.

— Your appliance is designed for normal

domestic use. Do not use it for commercial or

industrial purposes or for any other purpose

than the one for which it has been designed

•

Children’s safety

— This appliance must only be used by adults.

Do not let children play with the appliance and

keep pets away from it.

— Keep young children away from the

appliance when it is operating.

— When you have unpacked your appliance,

keep the packing out of children’s reach.

— Keep the packaging materials out of chil-

dren’s reach (e.g.: plastic bags, polystyrene,

etc.) because they can be dangerous for chil-

dren: risk of suffocation.

•

Use

Important :

Your tumble dryer is designed only for

domestic use, for drying textiles suitable for

tumble drying.

Important :

You must observe the following instruc-

tions. We decline any responsibility and res-

cind the guarantee if these recommendations

are ignored: failure to observe them can

result in material damage and physical injury.

— Use your appliance in accordance with its

method of use, thereby avoiding injury to your-

self and damage to your items. Do not use sol-

vents in the appliance (risk of fire and explo-

sion).

— Precautions for using stain-removing pro-

ducts:

Any preliminary treatment with solvents, stain-

removers or aerosols is forbidden because

these products are very inflammable. If your

laundry requires this type of treatment, this

must be done before washing. Similarly, we

recommend that you do not use these pro-

ducts near to your dryer or, in general, near

any electrical appliance in a poorly ventilated

room in order to avoid any risk of an explosion.

1 / FOR THE USER’S ATTENTION

— Strictly comply with the care instructions on your laundry.

— If you have to open the door of the drum during the drying cycle, ensure that you do not touch

the drum immediately, as it is very hot.

— Check the vent hose at regular intervals: this can help you to avoid your appliance malfunctioning.

Water can gather in the pipe (through condensation) depending on the operating conditions (load

of laundry, how well it has been spun and the external temperature); in this case you must empty

out any water accumulated in the vent hose.

— If any incidents occur, which you cannot resolve using the troubleshooting advice we provide (see

“TROUBLESHOOTING”), contact an appropriately qualified professional.

— Before disposing of your worn-out appliance, make it unusable. Unplug and cut off the power

cable flush with the appliance and make the door lock inoperable.

— For your safety’s sake, if you wish to change your appliance’s power cable, contact an appropria-

tely qualified electrician.

— If any operating anomalies occur, disconnect your appliance and call your After-Sales Service.

•ENVIRONMENTAL PROTECTION

This appliance’s packaging material is recyclable. Help recycle it and protect the environment by

dropping it off in the municipal receptacles provided for this purpose.

Your appliance also contains a great amount of recyclable material. It is marked with this

label to indicate the used appliances that should not be mixed with other waste. This way,

the appliance recycling organised by your manufacturer will be done under the best possi-

ble conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and

Electronic Equipment. Contact your town hall or your retailer for the used appliance collection

points closest to your home.

We thank you doing your part to protect the environment.

•ENERGY SAVINGS

— Spin your textiles at high speeds; the residual dampness will be low, as will your energy consump-

tion. Even synthetic textiles must be spun before drying.

— Place the maximum load in your machine; this will utilise energy optimally. When doing so, com-

ply with the indications on volume we provide in this instructions manual.

— The drying time and the energy consumption are both increased by a high ambient temperature

and too small a room.

— Clean the filter after each drying cycle.

2/ DESCRIPTION OF YOUR APPLIANCE

Fig. 01

Control panel

Vent hose

Filter

Information plate (Reference for

After-Sales)

Adjustable feet

• GENERAL PRESENTATION OF THE TUMBLE DRYER

Fig. 03

3 / INSTALLING YOUR TUMBLE DRYER

Fig. 02

• THE APPLIANCE’S SURROUNDINGS

Important :

We would strongly advise against:

— Installing your appliance on a carpeted floor.

If you cannot avoid this, take all possible mea-

sures not to obstruct the circulation of air at

its base.

— Installing your dryer in a location where it

could be subject to being splashed with water.

— Installing your dryer in a small closed room

(if this is the case, open the door or the win-

dow during drying)

— Installing your dryer in a poorly ventilated

room. The temperature in the room must

remain below 30°C during drying.

1 cm mini

Advice :

Your tumble dryer releases heat. If you place it next to another appliance or a unit, we would

advise you always to leave a space in-between to assist air circulation (Fig. 02).

Important :

Use a spirit level to check that the

appliance is horizontal:

Your dryer is fitted with 4 adjustable feet

(Fig.03). To adjust its horizontality and stabi-

lity:

— Tip it slightly backwards

— Screw one or more of the feet in or out using

a spanner or a screwdriver to adjust their

height to suit the shape of the floor (Fig.03)

— Set your dryer back on its feet and check

that it is stable.

• LEVELLING

3 / INSTALLING YOUR TUMBLE DRYER

• VENTING THE AIR

During drying, the hot, humidity-laden air

coming from your appliance must be vented

away.

• Either directly to the room :

(Fig. 04)

if the room is well-ventilated (if possible, install

your appliance near to a half-open window)

• Or via a permanent connection in

the wall :

(Fig. 05)

close to the appliance’s outlet (outlet nozzle

situated at a height of 30cm to avoid conden-

sation forming in the vent hose).

The slats in the outlet nozzle must be at least

15mm apart to avoid clogging.

Ensure that the room is appropriately ventila-

ted to avoid any risk of gas backflowing from

any associated appliances.

• Or temporarily : (Fig. 05)

by putting the end of the hose out of an open

window.

Important :

Grills with fly screens should not be

used.

The diameter of the passage through the wall

must be at least the same as the vent hose’s

external diameter.

Important :

Never connect to a chimney flue (risk

of combustion gas backflowing) or a mecha-

nical ventilation system.

Important :

The vent hose must be installed hori-

zontally or upwards and must never hang

down (Fig. 06); it should contain as few bends

as possible (2 at most).

Fig. 05

Fig. 04

Fig. 06

3 / INSTALLING YOUR TUMBLE DRYER

• MODIFYING THE AIR OUTLET

Sur les dessins ci-dessus, l’appareil est repré-

senté de dos.

On the drawings above, the appliance is

shown from the rear. The flexible hose must

be pulled out of the dryer.

You have three possible outlets:

— Right-hand side air outlet

— Left-hand side air outlet

— Rear air outlet

When it is delivered, your appliance’s air outlet

is on the right (viewed from the front) but you

can alter this. To do this, you must first of all

release the flexible vent hose.

— Right-hand side air outlet

- Unclip the handle by pulling it outwards and

then release the vent hose (Fig.07).

— Left-hand side air outlet

(Fig.08)

- Remove the left-hand hole cover

- Pass the hose and handle assembly through

the panel, orienting the handle to do this (

Fig. 08

➁➁

- Insert the right-hand hole cover.

— Rear air outlet

(Fig.09)

- Release the cover (

Fig. 08

➀➀

) using cutting

pliers.

- Release the duct carefully to avoid any risk of

being cut (

Fig. 09).

Certain precautions must be taken when ins-

talling the vent hose:

- It must not be increased in length

- It must have as few bends as possible (2 at

most); see Fig.05 on the previous page.

You will then obtain good performance and

maximum drying efficiency.

Fig. 07

Fig. 08

Fig. 09

Flexible vent hose

poignée

➀➀

Important :

The following actions must be taken before connecting your dryer :

➁➁

3 / INSTALLING YOUR TUMBLE DRYER

If you wish to incorporate your appliance as a built-in unit, a special kit is required. Please contact

your Consumer Relations Department.

PORTE A DROITE

• BUILT-UNDER INSTALLATION

PORTE A GAUCHE

Important :

Check with your local After Sales Service Centre to see whether the column mounting kit

is compatible with your washing machine.

For safety reasons, the assembly must be checked by a qualified professional.

• COMBINED WASHER/DRYER INSTALLATION

If you wish, you can alter the direction the door opens as follows

(Fig. 10 or 11).

— Remove the 4 screws in the front panel holding the hinges and

— Reverse the hinge and fasten it back on.

— Refit the door on the hinge .

— Reverse the hinge and fasten it back on.

— Reverse the positions of the lock and the cover on the machine’s front face.

— Reverse the positions of the bolt and the cover .

DDCC

EEFF

BBAA

Fig. 10

Fig. 11

• MODIFYING THE DOOR OPENING DIRECTION

LEFT-HAND DOOR RIGHT-HAND DOOR

3 / INSTALLING YOUR TUMBLE DRYER

• ELECTRICAL CONNECTION

Danger :

For making the electrical connection to your appliance:

— Do not use an extension, an adapter, a multiple socket or a programmable timer.

— The plug must be easily accessible but be out of children’s reach.

— If in any doubt about the condition of your installation, contact your installer or a qualified Brandt-

approved professional.

— Never eliminate the electrical Earthing system.

The electrical installation must comply with norm NF C15-100, particularly as regards the

Earthing system.

3 x 2.5mm² 230V line connected to:

— A 20A, 230V-50Hz meter

— A differential circuit-breaker and a specific 16A fuse

— A 16A 2 pin + Earth socket

We cannot be held responsible for any incident caused by poor electrical installation.

Advice :

In order to find your appliance’s reference numbers easily in future, we recommend that

you note them down on the “After-Sales Service and Consumer Relations” page (this page also

explains where to find these on your appliance).

Your appliance complies with European Directives 73/23/EEC (Low Voltage Directive) and

89/336/EEC (Electromagnetic Compatibility) as modified by Directive 93/68/EEC.

4 / PREPARING YOUR ITEMS

• CHECKING THE CONDITION OF YOUR TEXTILES

Advice :

If, before you insert your laundry in the

tumble dryer, you notice any stains, even

after washing, do not dry the items concer-

ned. As a general rule, stains that have been

ironed or tumble-dried can no longer be

removed.

Please refer to the instructions for treating

stubborn stains provided in most washing

machine operating instructions manuals

and, in particular, wash the stained items

again.

••

Preparing your items :

— Close all zip fasteners and press studs.

— Remove any loose buttons, pins or hook

fasteners.

— Knot any belts, apron strings, etc...

— Empty the pockets.

Normal

drying

Gentle

drying

Do not tumble dry

Important :

Check the labels on your texti-

les

— Open the door by pushing it (Fig.12).

— Check that the filter is in its housing (Fig.01

page 6).

— Insert the washed and spun laundry loosely

in the drum

wwiitthhoouutt ffoollddiinngg iitt oorr ppiilliinngg iitt uupp..

— Close the door.

••

Recommended volumes :

To reduce creasing and optimise drying

times, we recommend you do not overload

the machine.

Important :

Do not tumble-dry the following

articles:

— Plastic-coated fabrics

— Chlorofibres (Thermolactyl* for example)

*Registered trademark

— Items containing plastic foam, rubber or

underwiring that could become detached

— Bulky items (duvets, eiderdowns, etc...)

— Laundry that has not been spun

— Laundry cleaned with inflammable chemi-

cals.

• INSERTING YOUR ITEMS IN THE DRUM

Fig. 12

5 / PROGRAMMING

• PRESENTATION OF THE CONTROL PANEL

On /Off

Drying “Cotton”

Drying “Delicates”

Drying time

• PROGRAMMING A DRYING CYCLE

••

Starting the appliance

Check that the power cable is plugged in. The

appliance can be started if the door is properly

closed.

- Press the “ON/OFF” button

••

Choice of textile

— COTTON :

For loads consisting of household linen, terry

towelling and cotton clothes and underclo-

thes.

Press the “Cotton” button

— DELICATES :

For textiles that are particularly temperature-

sensitive (e.g. made from acrylic fibres).

Press the “Delicates” button

— MIXED :

For loads consisting of items of different types

(cotton and hard-wearing synthetic articles) or

made from mixed fibres.

Do not press any button.

••

Selecting the drying time

The selector knob has two functions:

— Drying time

Turn the knob clockwise to select the drying

time to suit the type of items, the load and how

efficiently your washing machine spin-dries.

— Refresh cycle (Cooling)

Selection this position when you want to

refresh items that have been stored in a cup-

board for a long time.

You can also use this programme as “Extra

Drying” if you think that some items are not

dry enough at the end of a normal drying pro-

gramme.

••

Immediate Start

Press the “ON/OFF” button: the cycle starts,

the “ON” indicator light illuminates and

remains lit until the end of the cycle.

AA BB CC DD

5 / PROGRAMMING

RECOMMENDED PROGRAMMES FOR TESTS TO EN 61121 - DIRECTIVE 95/13/EEC

Load I ”Dry cotton” 8 kg ....select “Cotton” button pressed

Load II ”Ready-to-iron cotton” 8 kg ....select “Cotton” button pressed

Load III ”Easy-care textiles” 3 kg ....select “Delicates” button pressed

••

Stopping the appliance

At the end of the programme, after a 12-

minute cooling, down period, your

appliance stops on the “End” position. The

“Maintain Filter” indicator light illuminates

to remind you that you must clean the filter

after each drying cycle.

— Press the “ON/OFF” button

— Empty your dryer.

— Clean the filter (see how to do this in the

“REGULAR MAINTENANCE” section).

Les temps de séchage ci-dessous vous sont donnés à titre indicatif, car ils sont fonction :

— The desired result: dry, damp, etc.

— The ambient temperature (these values correspond to an ambient temperature of 20°C)

— The quality of the prior spin-drying.

For lower spin speeds, the times will be relatively longer.

(For example, for 5kg of normal laundry spun at 500 rpm: 120 to 150 minutes).

• DRYING TIME

Advice :

As a safety measure, it is advisable to

unplug the power cable when you are not

using the appliance.

If you open the door during the cycle, the “ON/OFF” button is released. After closing the door,

press “ON/OFF” again to restart the programme.

Type of items Load For items spun at Drying cycle time

COTTON

8 kg 850rpm 110 to 130 minutes

3,5 kg 850rpm 60 to 70 minutes

DELICATES

3 kg 500rpm 60 to 80 minutes

1,5 kg 500rpm 40 to 50 minutes

MIXED

5 kg 850rpm 80 to 100 minutes

2,5 kg 850rpm 50 to 60 minutes

6 / REGULAR MAINTENANCE

To keep your appliance in good working order, we recommend that you use Clearit household

products.

Professional expertise for the general public

Clearit offers you professional products and adapted solutions for the daily upkeep of your house-

hold and kitchen appliances.

You may find them in conventional retail outlets, along with a complete line of by-products and

consumables.

Important :

We would remind you that the filter

must be cleaned after every cycle.

This is located in the lower part of your dryer.

Clean it as follows:

— Remove it from its housing by pulling it from

the bottom upwards (Fig. 13)

— Open the filter (Fig. 14)

— Clean it by removing the thin coating of fluff

covering it (Fig. 15)

Ensure that there is no fluff accumulating

round the dryer.

Important :

IThe filter must not be washed with

water (Fig. 16)

— Re-insert it in its housing, pushing it well in.

• CLEANING THE FILTER

Fig. 13

Fig. 14

Fig. 15

Fig. 16

Fig. 17

Advice :

To clean the control panel, the access

to the drum and the casing, use only a

sponge or a damp cloth and some soapy

water.

— Ensure that there is no fluff accumulating

round the dryer.

— Clean the door seal with a damp cloth.

— Clean the filter housing with your vacuum

cleaner once per year.

You should

nnoott uussee,,

under any circumstances

(Fig.17):

— Abrasive powders

— Metal or plastic sponges

— Alcohol-based products (alcohol, thinners,

etc.)

• CLEANING THE APPLIANCE

7 / TROUBLESHOOTING

Advice :

Some incidents may arise when you are using your dryer. Here are the points you should

check.

Fault : Check whether :

The dryer does not start

- The plug is in the socket

- The ON/OFF button is pressed in

- The door is properly closed

The drying times are too long

- The filter in the drum is clogged with fluff

- The laundry has been spun enough beforehand

(500rpm minimum, but spinning at 850rpm provides

better drying times)

- The temperature in the room is not too high, particu-

larly if the room is small: if necessary, open the door

or the window

- The vent hose has too many bends

- The drying programme selected matches the type of

items in the drum.

The laundry is too damp

- The filter in the drum is clogged with fluff

- The type of drying has been selected correctly (too

low) : switch to the next programme up or increase

the drying time.

The laundry is too dry, too creased

- The drying time selected is too long: the drying time

is better to be too short than too long: this avoids the

laundry becoming too dry and difficult to iron.

The items are unevenly dried

- The types of textiles in the load are too different (e.g.

sheets together with jeans)

- The laundry has been laid correctly ‘unfolded’ in the

dryer

The drum is not overloaded.

The synthetic items are loaded with

static electricity

- The laundry has been dried too much

- You have used softener during washing. By using this

product, you can reduce most of the problems with

static electricity.

8 / AFTER-SALES SERVICE

Any work on your appliance must be perfor-

med by a Brandt-approved qualified professio-

nal. When you call, mention your appliance’s

full reference (model, type, serial number).

These details are shown on the manufacturer’s

information plate (Fig. 18).

ORIGINAL PARTS

During any maintenance work, ask that only

cceerrttiiffiieedd oorriiggiinnaall rreeppllaacceemmeenntt ppaarrttss bbee uusseedd

••

INTERVENTIONS

Fig. 18

NOTES

EFE110A

Brandt Appliances - SAS au capital de 10.000.000 euros - RCS Nanterre 440 302 347

B2461A-03/06

Any maintenance on your equipment should be undertaken by:

- either your dealer,

- or another qualified mechanic who is an authorized agent

for the brand appliances.

When making an appointment, state the full reference of

your equipment (model, type and serial number). This infor-

mation appears on the manufacturer's nameplate attached

to your equipment.

Les éventuelles interventions sur votre appareil doivent être

effectuées :

- soit par votre revendeur,

- soit par un autre professionnel qualifié dépositaire de la

marque.

Lors de votre appel, mentionnez la référence complète de

votre appareil (modèle, type et numéro de série). Ces rensei-

gnements figurent sur la plaque signalétique fixée sur votre

appareil.

Eingriffe an Ihrem Gerät dürfen nur:

- von Ihrem Händler oder

- von einem sonstigen Fachmann und Vertragshändler der

Marke durchgeführt werden.

Geben Sie bei der Meldung einer Störung die vollständige

Typenbezeichnung Ihres Gerätes an (Modell, Typ,

Seriennummer). Diese Angaben finden Sie auf einem an

Ihrem Gerät angebrachten Schild.

Las intervenciones que requiera la máquina deberán ser

efectuadas:

- por el revendedor,

- o por cualquier profesional cualificado depositario de la marca.

Al llamar, mencione la referencia completa de la máquina

(modelo, tipo y número de serie). Estos datos figuran en la

placa de identificación situada en la máquina.

Qualquer intervenção no seu aparelho deve ser realizada:

- quer pelo seu revendedor,

- quer por outro profissional qualificado autorizado pela marca.

Ao chamá los, indique a referência completa do seu aparelho

(modelo, tipo e número de série). Estas informações figuram

na placa de identificação fixada no aparelho.

Eventuel vedligeholdelse af apparatet skal foretages:

- enten af Deres forhandler,

- eller af en kvalificeret fagmand, som er anerkendt til dette

mærke.

Når De ringer op, skal De angive apparatets fulde reference

(model, type, serienummer). Disse oplysninger står på types-

kiltet, der sidder på apparatet.

After Sales Service :

Service après vente :

Kundendienst :

Servicio postventa :

Serviços autorizados :

Kundeservice :

De eventuele ingrepen in de machine moeten worden uitge-

voerd :

- of door uw vakhandelaar,

- of door een andere gekwalificeerd technicus van dit merk.

Tijdens het telefoneren, dient u de complete referentie op te

geven van uw machine (model, type, serienummer). Deze

informatie staat op het typeplaatje op de machine.

Wszelkie czynności serwisowe wykonywane na urządzeniu

muszą być wykonane przez:

- sprzedawcę,

- wyspecjalizowany zakład naprawczy posiadający atest pro-

ducenta.

Aby przyspieszyć i ułatwić obsługę prosimy o podanie

dokładnych danych dotyczących urządzenia (model, typ,

numer seryjny). Wszystkie te dane znajdują się na tabliczce

znamionowej umieszczonej na urządzeniu.

Případné opravy na přístroji může provádět pouze :

- váš prodejce

- nebo záruční opravna, která má smlouvu s výrobcem

Při telefonickém styku uvádějte úplné označení vašeho

přístroje (model, typ a výrobní číslo). Tyto údaje jsou uvede-

ny na výrobním štítku přístroje.

    ,  

:

-  ,    ;

-  ,    

 .

        

 (,    ). !  

  ",   .

Οι ενδεχόμενες επεμβάσεις πάνω στη συσκευή σας θα

πρέπει να διενεργούνται:

- είτε από τον προμηθευτή σας,

- είτε από το κατά τόπους εξουσιοδοτημένο σέρβις.

Σε περίπτωση που τηλεφωνήσετε, θα πρέπει να

αναφέρετε όλα τα στοιχεία της συσκευής σας (μοντέλο,

τύπο και αριθμό σειράς).Τα στοιχεία αυτά αναγράφονται

στην ετικέτα των χαρακτηριστικών του κατασκευαστή που

βρίσκεται πάνω στη συσκευή.

Serviceafdeling :

Usługi serwisowe :

Záruční servis :

Cepcoe ocyae :

Tεχνική υποστήριξη :

Brandt EFE110A Owner's manual

Brand: Brandt

Model: EFE110A

Category: Tumble dryers

Type: Owner's manual

This manual is also suitable for

EFE118A

Download PDF

report

Brandt EFE110A Owner's manual

This manual is also suitable for

Brandt EFE110A Owner's manual

Related papers

Other documents