JUNG TK-SP1 Operating instructions

JUNG
Brand
JUNG
Model
TK-SP1
Type
Operating instructions

JUNG TK-SP1

The JUNG TK-SP1 is a SIP-Software that enables VoIP and video door communication. It can also be used to switch functions on the JUNG DCM bus. To use the full version of the software, a hardware dongle is required. Without the dongle, the demo version is active, which provides all functions of the full version for 30 days.

System requirements:

  • 1 USB port (1.1 or higher)
  • 100 MB free space on hard disk
  • Graphics card with SVGA resolution (min. 800 x 600 pixels), 16-bit colors
  • Operating system Windows XP SP2, Windows Vista SP2 (32/64-Bit), or Windows 7 (32/64-Bit)
  • Microsoft .NET Framework 3.5 SP1 or higher

JUNG TK-SP1

The JUNG TK-SP1 is a SIP-Software that enables VoIP and video door communication. It can also be used to switch functions on the JUNG DCM bus. To use the full version of the software, a hardware dongle is required. Without the dongle, the demo version is active, which provides all functions of the full version for 30 days.

System requirements:

  • 1 USB port (1.1 or higher)
  • 100 MB free space on hard disk
  • Graphics card with SVGA resolution (min. 800 x 600 pixels), 16-bit colors
  • Operating system Windows XP SP2, Windows Vista SP2 (32/64-Bit), or Windows 7 (32/64-Bit)
  • Microsoft .NET Framework 3.5 SP1 or higher
Product Information
DCM Softphone
TK-SP1
ALBRECHT JUNG GMBH & CO. KG
Volmestraße 1
58579 Schalksmühle
phone +49.2355.806-0
fax +49.2355.806-189
E-Mail: mail.vka@jung.de
Internet: www.jung.de/en
2
Contents
Intended use ........................................................................................................................ 2
Application ........................................................................................................................ 2
Brief description................................................................................................................ 2
System requirements ........................................................................................................... 2
Installation ............................................................................................................................ 2
Settings ................................................................................................................................ 3
Acceptance of guarantee ..................................................................................................... 4
Intended use
Application
• For VoIP- and Video Door communication
• For switching function on the JUNG DCM bus
• For use in combination with video streamer and SIP-Gateway. The use of a SIP-Server
is recommended.
Brief description
• The SIP-Software DCM Softphone comes with a hardware-dongle only.
• This dongle is mandatory for using the full version!
• Without dongle the demo version is active. All functions of the full version are available
for 30 days!
System requirements
• 1 USB-port (1.1 or higher)
• 100 MB free space on hard disk
• Graphic card with SVGA-resolution (min. 800 x 600 pixels) 16bit colours
• Operating system Windows XP SP2, Windows Vista SP2 (32/64-Bit)
or Windows 7 (32/64-Bit)
• Microsoft .NET Framework 3.5 SP1 or higher
Installation
• The software can be downloaded from our webpage www.jung.de/en/.
• The software comes as a zip-file.
• Unzip this file and start the .exe-file.
• Please follow the installation routine.
3
Settings
To get full functionality SIP-Gateway, Video streamer and SIP-Server have to
be configured.
In the SIP settings (settings -> SIP settings) of the device the parameters have to be
configured according to the settings and the login data of the SIP-server.
The video sources need to get a designation and an IP address.
In the phone book the incoming call can be connected to the video source and its
designation. Then the designation of the video source will be shown.
4
Acceptance of guarantee
We accept the guarantee in accordance with the corresponding legal provisions.
Please return the unit postage paid to our central service department giving
a brief description of the fault:
ALBRECHT JUNG GMBH & CO. KG
Service-Centre
Kupferstr. 17-19
44532 Lünen
Germany
Service-Line: 0 23 55 . 80 65 51
Fax: 0 23 55 . 80 61 89
E-Mail: mail.v[email protected]e
Technique (DCM)
Service-Line: 0 23 55 . 80 65 52
Fax: 0 23 55 . 80 62 55
E-Mail: mail.v[email protected]e
Albrecht Jung GmbH & Co. KG
Volmestraße 1
58579 Schalksmühle
www.jung.de/en
The -sign is a free trade sign addressed ex-
clusively to the authorities and does not include
any warranty of any properties.
Technical subjects to change
EN_PI_TK-SP1_1v1.doc
07/2013
0024073000
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

JUNG TK-SP1 Operating instructions

JUNG
Brand
JUNG
Model
TK-SP1
Type
Operating instructions

JUNG TK-SP1

The JUNG TK-SP1 is a SIP-Software that enables VoIP and video door communication. It can also be used to switch functions on the JUNG DCM bus. To use the full version of the software, a hardware dongle is required. Without the dongle, the demo version is active, which provides all functions of the full version for 30 days.

System requirements:

  • 1 USB port (1.1 or higher)
  • 100 MB free space on hard disk
  • Graphics card with SVGA resolution (min. 800 x 600 pixels), 16-bit colors
  • Operating system Windows XP SP2, Windows Vista SP2 (32/64-Bit), or Windows 7 (32/64-Bit)
  • Microsoft .NET Framework 3.5 SP1 or higher
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers