1, Name of main parts and components
1. Drive wheel
2. Main body
3. Control panel
4. Knob
5. Power cord
6 Milling cup
7. Milling blade
8. Milling blade seat
9. Feeding cap
10. Lid of the blending jug
11. Mixing cup(jug)
12.
Sealing ring
13. Blending blade
14. Blendeing blade seat
15. Filter
Caution
1. Before using the product, please read this manual carefully and operate the blender
accordling.
2 Please make sure that the offering voltage is same as the one shown on the rating lable .
before pluging in,
3. It is fobidden for the kids or mental retarded person to operate this machine.
4. Operator must obey a rated intermittent time, it is forbidden to make it idle run or overload
5. Changing the power cord or maintaining machine shall be
operated by the professional
service personnel.
6. The blade is very sharp, pay attention not to hurt your hand when cleaning and disassembling
the machine.
7. The blade base should be firmly locked with the cup. Do not forget the gasket ring, or there
will happen the water leakage.
8. It is forbidden to let the product work with blade only.
2
3
4
5
1
Main Engine
9
10
12
13
14
11
15
B=Blender
7
6
8
A=Grinder
9. Do not touch the running parts when the product is working.
10. Without the blending cover in proper place, please do not use the product..
11. When it is plug in, please do not put the figer or apparatus (especially the soup spoon) in the
blending cup.
12. It is forbidden to put hot
mixture(above 65C) in the blending or grinding cup.
13. The motor of this machine has a over-temperature protection device, the machine will be
paused as a result of overheating during operating.At this moment,you should cut off the
power supply,restart it till it is completely cooled.
14. Do not directly use water to wash the main engine. It will cause electrical failure or accident of
motor and switch.
15. House hold use only.
2 Main technical parameters
Item: BH-703W/BH-703S
Rated voltage: 220-240V~
Rated frequency: 50HZ
Rated power: 400W
Protection class II
Continue work time : Don’t exceed 1 minute
3 Combination of mixer and method for use (in combination
with milling cup, mixing cup, filter
(1) Combination with mixing cup and usage
1, Place gasket ring in the blade flatly,and make sure that the side with
wheel gear upside.
2. Twist the blade set onto the underneath part of the blending cup in anticlockwise direction.
2
3
4
5
1
9
10
11
Caution：
☆ Forgetting fix the gasket ring or install incorrectly will lead to water leakage.
3, Put ingredients into mixing cup, then close the cover onto the blendind cup clockwisely.
Note:
☆ Ingredients in the cup shall not exceed 1500ml, the maximum capacity of mixing cup.
☆ Please cut solid ingredients into 1 ~ 2cm first, then add water in and have them blended..
4. Cover the lid and fasten it tightly in clockwise direction..
5. Tighten the jar on motor base in clockwise direction.
Note:
☆ There is a safety switch device within the set, when the mixing cup is not placed properly,
the product can not work..
☆ To avoid accidental, please do not use the push rod or other tools to press the safety
switch!
Safety switch
6、Plug cord into outlet.
7、Select the appropriate speed operation.
Note:
☆For soft ingredients, please use low-speed operation.
☆For hard ingredients, please use high-speed operation. If the ingredients have a very hard
core (seed), it is better that you take them out first and then blend.
☆In the mixing process, when want to add ingredients or sauces, you can open the lid first
and then add the food in.
8、 After mixing, please turn off the power switch, then pull the power plug from outlet.
9、Take off the jar from motor base counterclockwisely.
10、Open the lid in anticlockwise direction, pour the ingredients out, then you can enjoy yourself.
11、For repeat operation, please do it according to above steps.
(2)Combination of mixing cup and filter
1、 Dip the soybean into the water for 8 hours
2、 Insert the filter down the center of the cup, making sure to line the three notches up with the
three ribs inside of the blending cup.
3、 Twist the blending blade onto the bottom of blending cup.
4、 Add some water in the blending cup and waterlogged beans in the lid. Measure the beans by
lid, and never add beans more than one and half cups. After it , fix the lid on the cover of the
cup.
5、 Plug in and press down the switch. When the machine works regularly, it can finish the
soybean milk making in 1 minutes.
6、 Pour out the soybean milk and the residue left in the filter naturally.
7、 Boil the pre-processed
soybean milk, then it can be drink directly.
(3) Combination of milling cup and usage
1、 Put a moderate amount of dry ingredients into the grind cup. The
maximum amount of ingredients is 150g
2、 Attach the blade assembly to the cup by turning it counter-clockwise
3、 Get the grinding cup stood upward and put it onto the main engine and
screw it clockwise at same time, so as to make the cramp on the grinding
cup firmly fixed at the cramping the position of motor.
4、 Plug the power cord.
5 Select the appropriate speed to start grinding, it can be done in 30S for
general food.
Caution:
☆A continuous working time can not exceed the 30S, the main engine
need 3 minutes for beak before you reuse it.
6 After grinding, firstly please turn the knob t
o “0”(power off) and then
unplug the cord.
7 Loosen the grind cup counter-clockwise, put It down form the main
engine.
8 Remove the blade base from the grind cup and pour out the ingredients.
9 Please confirm to the above steps when you reuse the machine.
4, Cleaning and Maintenance
When Cleaning attachment or wiping the host with damp clotht, be sure to unplug the
power plug to avoid electric shock.
Host should be cleaned by wet cloth instead of water.
2
3
4
5
1
7
6
8
It is forbidden to wash the product with automatic dishwasher.
After the cleaning is completed, dry and reassemble the components, then it can be
used again.
The product may discolor according to different use conditions
The machine should be frequently used, or save it in a dry ventilated place to prevent
the motor from moisture.
15
2
3
4
5
1
9
10
12
13
14
11
7
6
8
9
10
12
13
14
11
15
7
6
8
2
3
4
5
1
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
