Step5:CrossBrace Step6:LowerPlowSupports
Step7:ConnectLower/PlowSupportBraces Step8:ConnectRemainingLowerPlowSupportHoles
2
1.)Locatea5/16”x1¾”HexBolt(Ref.#7) andplacea
5/16”flatwasher(Ref.#8)onthebolt,thenputit
throughthehandle(Ref.#1).
2.)PlacetheRightHandLowerPlowSupport(Ref.#3A)
onthebolt,followedbya5/16”lockwasher
(Ref.#9)
and5/16”hexnut(Ref.#10)
3.)RepeatthesamestepsfortheLeftHandLower
PlowSu
ort
Re
.#3B
onthelefthandle
‐Witha5/16”x1¼”HexBolt(Ref.#12),connectthe
LowerPlowSupports(Ref.#3A/3B)tothe
outsideofthePlowSupportBraces(Ref.#4).
‐Securewith5/16”lockwasher(Ref.#9)and
5
16”HexNut
Re
.#10
.
1.)Securecrossbrace(Ref.#2)byplacinga5/16”flat
washer(Ref.#8)onthe5/16”x1¾”bolt(Ref.#7)and
insertingitthroughtheuppermostholeonthehandle
(Ref.#1)andthescrewholeofthecrossbrace.
2.)Fastenwitha5/16”lockwasher(Ref.#9)and
5/16”hexnut(Ref.#10)
3.)Repeatsamestepsfortheotherhandle
‐Inserta5/16”x11/4”Hexbolt(Ref.#12)througheach
oftheremainingLowerPlowSupportholes.
‐Adda5/16”x7/8”x.280Spacer(Ref.#14)toeachbolt.
‐Securewitha5/16”lockwasher(Ref.#9)anda
5/16”HexNut(Ref.#10).
‐Tighten
allnutsandboltsatthistime.