Garmin eTrex 10 Owner's manual

eTrex

®

owner’s manual

for use with models 10, 20, 30

the written consent of Garmin. Garmin reserves the right to change or improve its products and to make

changes in the content of this manual without obligation to notify any person or organization of such

changes or improvements. Go to www.garmin.com for current updates and supplemental information

concerning the use of this product.

Garmin

®

, the Garmin logo, eTrex

®

, BlueChart

®

, and City Navigator

®

are trademarks of Garmin Ltd. or its

subsidiaries, registered in the USA and other countries. ANT

™

, ANT+

™

, BaseCamp

™

, chirp

™

, HomePort

™

,

and Thumb Stick

™

are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used

without the express permission of Garmin.

Windows

®

is a registered trademark of Microsoft Corporation in the United States and/or other countries.

Mac

®

is a registered trademarks of Apple Computer, Inc. microSD

™

is a trademark of SD-3C, LLC. Other

trademarks and trade names are those of their respective owners.

owner’s manual for use with models 10, 20, 30 1

Table of Contents

EN

Table of Contents

Getting Started ...................3

Device Overview .........................3

Using the eTrex Keys ...................4

Battery Information .....................5

Turning the Device On or Off ........6

Satellite Signals ...........................6

Registering Your Device ...............6

Waypoints, Routes, and

Tracks .................................7

Waypoints...................................7

Using Sight ‘N Go ........................8

Where To? Menu .........................9

Routes ...................................... 10

Tracks ...................................... 12

Navigation ........................14

Navigating to a Destination ........ 14

Map ......................................... 14

Compass .................................. 15

Elevation Plot ............................ 17

Trip Computer

........................... 18

Geocaches ........................19

Downloading Geocaches ............ 19

Filtering the Geocache List ......... 19

Navigating to a Geocache .......... 20

Logging the Attempt .................. 20

chirp

™

...................................... 21

Applications ......................22

Sharing Data ............................. 22

Setting a Proximity Alarm ........... 22

Calculating the Size of an Area ... 23

Using the Calculator .................. 23

Viewing the Calendar and

Almanacs .................................. 23

Setting an Alarm ....................... 24

Opening the Stopwatch ............. 24

Satellite Page ............................ 24

Customizing Your Device..26

Customizing the Main Menu ....... 26

Customizing Specic Pages ........ 26

Proles ..................................... 27

2 owner’s manual for use with models 10, 20, 30

Table of Contents

EN

System Settings ........................ 28

Display Settings ........................ 28

Setting the Device Tones ........... 29

Map Settings ............................. 29

Tracks Settings .......................... 30

Changing the Units of Measure ... 31

Time Settings ............................ 31

Position Format Settings ............ 31

Heading Settings ....................... 32

Altimeter Settings ...................... 32

Geocaching Settings .................. 33

Routing Settings ........................ 34

Marine Map Settings .................. 35

Fitness ..................................... 36

Resetting Data .......................... 36

Changing the Page Sequence ..... 37

Device Information ..........38

Adjusting the Screen ................. 38

Updating the Software ............... 38

Viewing Device Information ....... 38

Specications ............................ 39

About the Batteries ................... 39

Caring for the Device ................. 40

Data Management ..................... 41

Appendix ..........................44

Optional Accessories .................. 44

Data Field Options ..................... 45

Troubleshooting ........................ 50

owner’s manual for use with models 10, 20, 30 3

Getting Started

EN

Getting Started

WARNING

See the Important Safety and

Product Information guide in the

product box for product warnings

and other important information.

When using your device the rst

time, you should complete these

tasks to set up the device and get

to know the basic features.

1. Install the batteries (page 5).

2. Turn on the device (page 6).

3. Acquire satellites (page 6).

4. Register the device (page 6).

5. Mark a waypoint (page 7).

6. Create a route (page 10).

7. Record a track (page 12).

8. Navigate to a destination (page

14).

9. Calibrate the compass (page

15).

Device Overview

➊

➎

➍

➌

➋

➊

Zoom keys

➋

Back key

➌

Thumb Stick™

➍

Menu key

➎

/Backlight key

4 owner’s manual for use with models 10, 20, 30

Getting Started

EN

➏

➒

➑

➐

➏

Mini-USB port (under weather cap)

➐

Battery cover

➑

Battery cover locking ring

➒

Mounting spine

Using the eTrex Keys

• Move the Thumb Stick up,

down, left, and right to highlight

menu selections or to move

around the map.

• Press the center of the Thumb

Stick to select the highlighted

item.

• Press back to move back one

step in the menu structure.

• Press menu to display a list of

commonly-used functions for

the current page. Press menu

twice to access the main menu

from any page.

• Press ▲ and ▼ to zoom in and

out on the map.

owner’s manual for use with models 10, 20, 30 5

Getting Started

EN

Battery Information

WARNING

The temperature rating for the

device (-4°F to 158°F, or -20 to

70°C) may exceed the usable range

of some batteries. Alkaline batteries

can rupture at high temperatures.

NOTICE

Alkaline batteries lose a signicant

amount of their capacity as

temperature decreases. Therefore,

use lithium batteries when

operating the device in below-

freezing conditions.

Installing AA Batteries

The device operates on two AA

batteries. You can use alkaline,

NiMH, or lithium batteries. Use

NiMH or lithium batteries for best

results.

1. Turn the D-ring counter-

clockwise, and pull up to remove

the cover.

2. Insert the batteries, observing

polarity.

3. Replace the battery cover, and

turn the D-ring clockwise.

4. Hold .

5. Select Setup > System >

Battery Type.

6. Select Alkaline, Lithium, or

Rechargeable NiMH.

6 owner’s manual for use with models 10, 20, 30

Getting Started

EN

Turning the Device On or

Off

Hold .

Satellite Signals

After the device is turned on, it

begins acquiring satellite signals.

The device may need a clear view

of the sky to acquire satellite

signals. When the GPS bars on the

backlight page

(page 38) are solid green, your

device has acquired satellite

signals. The time and date are set

automatically based on the GPS

position.

For more information about GPS,

go to http://www.garmin.com/

aboutGPS.

Registering Your Device

• Go to http://my.garmin.com.

• Keep the original sales receipt,

or a photocopy, in a safe place.

owner’s manual for use with models 10, 20, 30 7

Waypoints, Routes, and Tracks

EN

Waypoints, Routes,

and Tracks

Waypoints

Waypoints are locations you record

and store in the device.

Creating a Waypoint

You can save your current location

as a waypoint.

1. Select Mark Waypoint.

2. Select an option:

• To save the waypoint without

changes, select Done.

• To make changes to the

waypoint, select an item to

edit, and select Done.

Finding a Waypoint

1. Select Where To? >

Waypoints.

2. Select a waypoint.

Editing a Waypoint

Before you can edit a waypoint, you

must create a waypoint.

1. Select Waypoint Manager.

2. Select a waypoint.

3. Select an item to edit.

4. Enter the new information.

5. Select Done.

Deleting a Waypoint

1. Select Waypoint Manager.

2. Select a waypoint.

3. Select menu > Delete > Yes.

8 owner’s manual for use with models 10, 20, 30

Waypoints, Routes, and Tracks

EN

Increasing the Accuracy of a

Waypoint Location

Waypoint averaging allows you to

increase the accuracy of a waypoint

location by collecting multiple

samples of the waypoint location.

1. Select Waypoint Averaging.

2. Select a waypoint.

3. Move to the location.

4. Select Start.

5. When the Sample Condence

status bar reaches 100%, select

Save.

For best results, collect four to

eight samples for the waypoint,

waiting at least 90 minutes

between samples.

Using Sight ‘N Go

Sight ‘N Go is available on the

eTrex 30.

You can point the device at an

object in the distance, lock in the

direction, and then navigate to the

object.

1. Select Sight ‘N Go.

2. Point the device at an object or

in the direction of a location.

3. Select Lock Direction >

Project Waypoint.

4. Select a unit of measure.

5. Enter the distance to the object,

and select Done > Save.

owner’s manual for use with models 10, 20, 30 9

Waypoints, Routes, and Tracks

EN

Where To? Menu

You can use the Where To? menu

to nd a destination to navigate to.

Not all Where To? categories are

available in all areas and maps.

Additional Maps

You can use additional maps on

the eTrex 20 and eTrex 30, such

as BirdsEye

™

satellite imagery,

BlueChart

®

g2, TOPO, and City

Navigator

®

detailed maps. Detailed

maps may contain additional points

of interest, such as restaurants

or marine services. For more

information, go to http://buy.

garmin.com or contact your Garmin

dealer.

Finding a Location by Name

Depending on the maps loaded

on your device, you can search

for cities, geographic points, and

various points of interest (POIs),

such as restaurants, hotels, and

auto services.

1. Select Where To?.

2. Select a category.

3. Select menu > Spell Search.

4. Enter all or part of the name,

and select Done.

Finding a Location Near

Another Location

1. Select Where To? > menu >

Search Near.

2. Select an option.

3. If necessary, select a location.

10 owner’s manual for use with models 10, 20, 30

Waypoints, Routes, and Tracks

EN

Finding an Address

You can use optional City Navigator

maps to search for addresses.

1. Select Where To? >

Addresses.

2. If necessary, enter the country

or state.

3. Enter the city or postal code.

NOTE: Not all map data

provides postal code searching.

4. Select the city.

5. Enter the house number.

6. Enter the street.

Routes

A route is a sequence of waypoints

that leads you to your nal

destination.

Creating a Route

1. Select Route Planner >

Create Route > Select First

Point.

2. Select a category.

3. Select the rst point in the

route.

4. Select Use > Select Next

Point.

5. Repeat steps 2–4 until the route

is complete.

6. Select back to save the route.

Editing the Name of a Route

1. Select Route Planner.

2. Select a route.

3. Select Change Name.

4. Enter the new name.

5. Select Done.

owner’s manual for use with models 10, 20, 30 11

Waypoints, Routes, and Tracks

EN

Editing a Route

1. Select Route Planner.

2. Select a route.

3. Select Edit Route.

4. Select a point.

5. Select an option:

• To view the point on the

map, select Review.

• To change the order of the

point on the route, select

Move Down or Move Up.

• To add an additional point on

the route, select Insert.

The additional point is

inserted before the point you

are editing.

• To remove the point from the

route, select Remove.

6. Select back to save the route.

Viewing a Route on the Map

1. Select Route Planner.

2. Select a route.

3. Select View Map.

Deleting a Route

1. Select Route Planner.

2. Select a route.

3. Select Delete Route.

Viewing the Active Route

1. While navigating a route, select

Active Route.

2. Select a point in the route to

view additional details.

Reversing a Route

1. Select Route Planner.

2. Select a route.

3. Select Reverse Route.

12 owner’s manual for use with models 10, 20, 30

Waypoints, Routes, and Tracks

EN

Tracks

A track is a recording of your path.

The track log contains information

about points along the recorded

path, including time, location, and

elevation for each point.

Recording Track Logs

1. Select Setup > Tracks >

Track Log.

2. Select Record, Do Not Show

or Record, Show On Map.

If you select Record, Show

On Map, a line on the map

indicates your track.

3. Select Record Method.

4. Select an option:

• To record tracks at a variable

rate that creates an optimum

representation of your tracks,

select Auto.

• To record tracks at a

specied distance, select

Distance.

• To record tracks at a

specied time, select Time.

5. Select Record Interval.

6. Complete an action:

• Select an option to record

tracks more or less often.

NOTE: Using the Most

Often interval provides the

most track detail, but lls up

the device memory quicker.

• Enter a time or distance, and

select Done.

As you move with the device turned

on, a track log is created.

owner’s manual for use with models 10, 20, 30 13

Waypoints, Routes, and Tracks

EN

Saving the Current Track

The track being recorded is called

the current track.

1. Select Track Manager >

Current Track.

2. Select what you want to save:

• Select Save Track.

• Select Save Portion, and

select a portion.

Viewing Track Information

1. Select Track Manager.

2. Select a track.

3. Select View Map.

The beginning and the end of

the track are marked by ags.

4. Select menu > Review Track.

Information about the track is

listed.

Viewing the Elevation Plot of

a Track

1. Select Track Manager.

2. Select a track.

3. Select Elevation Plot.

Archiving a Saved Track

You can archive saved tracks to

save memory space.

1. Select Track Manager.

2. Select a saved track.

3. Select Archive.

Clearing the Current Track

Select Setup > Reset > Clear

Current Track > Yes.

Deleting a Track

1. Select Track Manager.

2. Select a track.

3. Select Delete > Yes.

14 owner’s manual for use with models 10, 20, 30

Navigation

EN

Navigation

You can navigate a route, a track,

to a waypoint, to a geocache, or to

any saved location in the device.

You can use the map (page 14) or

compass (page 15) to navigate to

your destination.

Navigating to a

Destination

You can navigate to a destination

using the map or compass.

1. Select Where To?.

2. Select a category.

3. Select a destination.

4. Select Go.

The map page opens with your

route marked with a magenta

line.

5. Navigate using the map (page

14) or compass (page 15).

Stopping Navigation

Select Where To? > Stop

Navigation.

Map

represents your location on the

map. As you travel, moves. When

you are navigating to a destination,

your route is marked with a

magenta line on the map.

To customize the map settings, see

page 29. To customize the map

dashboard and data elds, see

page 26.

Browsing the Map

1. Select Map.

2. Select one or more options:

• Use the Thumb Stick to pan

the map to view different

areas.

• Select ▲ and ▼ to zoom in

and out of the map.

owner’s manual for use with models 10, 20, 30 15

Navigation

EN

• Select a location on the map,

and the bar at the top of the

screen shows information

about the selected location.

Navigating a Driving Route

Driving route navigation is only

available on the eTrex 20 and eTrex

30.

Before you can use the map,

you must purchase and load City

Navigator maps. If you plan to use

an auto mount accessory with the

device, you must also purchase and

install the mount in your vehicle.

1. Select Prole Change >

Automotive.

2. Use the map to navigate to the

destination.

3. Follow the turns in the text bar

along the top of the map.

Compass

The eTrex 30 has a 3-axis,

electronic compass.

You can use a bearing pointer or a

course pointer to navigate to your

destination.

TIP: When the device is using the

automotive prole, the compass

displays GPS heading, not magnetic

heading.

Calibrating the Compass

NOTICE

Calibrate the electronic compass

outdoors. To improve heading

accuracy, do not stand near objects

that inuence magnetic elds, such

as cars, buildings, or overhead

power lines.

16 owner’s manual for use with models 10, 20, 30

Navigation

EN

You should calibrate the compass

after moving long distances,

experiencing temperature changes,

or changing the batteries.

1. Select Compass > menu >

Calibrate Compass > Start.

2. Follow the on-screen

instructions.

Navigating with the Bearing

Pointer

When navigating to a destination,

points to your destination,

regardless of the direction you are

moving.

1. Begin navigation to a destination

(page 14).

2. Select Compass.

3. Turn until points toward

the top of the compass,

and continue moving in that

direction to the destination.

About the Course Pointer

The course pointer is most useful

if you are navigating on water or

where there are no major obstacles

in your path.

➋

➊

➍

➌

The course pointer

➊

indicates

your relationship to a course line

➋

leading to the destination. The

course line to your destination is

based on your original starting

point.

As you drift from the intended

course to the destination, the

course deviation indicator

➌

(CDI)

provides the indication of drift

(right or left) from the course.

owner’s manual for use with models 10, 20, 30 17

Navigation

EN

The scale

➍

refers to the distance

between dots on the course

deviation indicator.

Navigating with the Course

Pointer

Before you can navigate with the

course pointer, you must change

the pointer setting to Course

(CDI) (page 32).

1. Begin navigation to a destination

(page 14).

2. Select Compass.

3. Use the course pointer to

navigate to the destination

(page 16).

Elevation Plot

Elevation plotting is available on the

eTrex 30.

By default, the elevation plot

displays the elevation for an

elapsed time. To customize the

elevation plot, see page 32.

Select Elevation Plot.

Changing the Plot Type

You can change the elevation plot

to display pressure and elevation

over

time or distance.

1. Select Elevation Plot > menu

> Change Plot Type.

2. Select an option.

Viewing Details about a Point

on the Plot

Select an individual point on the

plot.

Details about the point appear

at the top of the plot.

Resetting the Elevation Plot

Select Elevation Plot > menu

> Reset > Clear Current

Track > Yes.

18 owner’s manual for use with models 10, 20, 30

Navigation

EN

Calibrating the Barometric

Altimeter

You can manually calibrate the

barometric altimeter if you know

the correct elevation or the correct

barometric pressure.

1. Go to a location where the

elevation or barometric pressure

is known.

2. Select Elevation Plot > menu

> Calibrate Altimeter.

3. Follow the on-screen

instructions.

Trip Computer

The trip computer displays your

current speed, average speed,

maximum speed, trip odometer,

and other helpful statistics.

To customize the trip computer, see

page 26.

Resetting the Trip Data

For accurate information, reset the

trip information before beginning

a trip.

Select Trip Computer > menu

> Reset > Reset Trip Data

> Yes.

All of the trip computer values

are set to zero.

Page is loading ...

Garmin eTrex 10 Owner's manual

This manual is also suitable for

Garmin eTrex 10 Owner's manual

Related papers

Other documents