Whirlpool AWM 8123/1 Program Chart

Brand: Whirlpool

Model: AWM 8123/1

Type: Program Chart

Whirlpool AWM 8123/1 offers a wide range of features to make your laundry experience more efficient and effective. With 14 pre-set programs, including specialized cycles for cotton, synthetics, delicates, and wool, you can customize the wash to suit the fabric and soil level. Additional options like prewash, intensive rinse, and rinse hold provide further flexibility. The adjustable spin speed and temperature settings allow you to fine-tune the wash cycle for optimal results. The time-saving delay start function lets you schedule the wash to begin at your convenience.

5019 301 05226/A

Whirlpool is a registered trademark of Whirlpool USA.

Programme

Care

Labels

Type of wash/Notes

Max

Load

Detergents and additives Special options Max

Spin

Speed

rpm

Temperature

°C

Softener Main

Wash

Prewash Start

Delay

Easy

Ironing

Eco Prewash Intensive

Rinse

Hold

Spin

Speed

Reduction

Start-

vorwahl

Leicht

Bügeln

Sparen

Vor-

wäsche

Intensiv

Spülen

Spül-

Stopp

Schleudern

White Cotton

Kochwäsche

Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of

cotton and linen.

With heavily soiled laundry the additional “Prewash” option can be selected as well.

6,0

❉

Yes

❉❉❉❉❉❉❉❉

1200

20 to 95

Coloured cotton

Buntwäsche

Slightly to normally soiled bed linen, table linen and underwear, towels, shirts etc.

made of cotton and linen.

6,0

❉

Yes

❉❉❉❉❉❉❉❉

1200

20 to 60

Synthetics

Pflegeleicht

Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,

Trevira), polyamide (Perlon, Nylon) or blends with cotton.

2,5

❉

Yes

❉❉❉❉❉❉❉❉

800

20 to 60

Rapid

Slightly soiled overalls and sports wear made of cotton, polyester, polyamide and

blends with cotton.

3,0

❉

Yes —

❉❉

——

❉❉❉

1200

20 to 60

Delicates

Feinwäsche

Curtains and delicate clothing, dresses skirts, shirts and blouses.

1,5

❉

Yes

❉❉

——

❉

—

❉❉

800

20 to 40

Wool

Wolle

Only woollens with a felt-free finish, labelled with the woolmark and identified as

machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

1,0

❉

Yes —

❉

——— —

❉❉

800

20 to 40

Handwash

Handwäsche

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. A very gentle spin is

used in this programme.

1,0

❉

Yes —

❉

——— —

❉❉

400

20 to 30

Rinse + spin

Spülen + Schleudern

—

Same as the last rinse and the final spin in the “Coloured Cotton” programme.

6,0

❉

——

❉❉

——

❉❉❉

1200

—

Spin

Schleudern

—

In this programme spinning is intensive. Same as the spin cycle in the “Coloured

Cotton” programme.

6,0

———

❉

——— ——

❉

1200

—

Gentle spin

Schonschleudern

—

In this programme spinning is gentle. Same as the spin cycle in the “Wool”

programme.

1,5

———

❉

——— ——

❉

800

—

Drain

Abpumpen

—

Drain only - no spinning. Alternative method of terminating programme after “Rinse

Hold”.

—

——————————

——

A. Temperature Selection Buttons

B. “Water Stop” Indication

C. “Start/Pause” Button

D. Programme Sequence Indicator

E. “Door Open” Indication

F. “Start Delay” Button

G. “Spin Speed Reduction” Button

Selecting any option the indication lights up.

When the combination of programme, additional

options and temperature is not possible, the

indication lights switch off automatically.

Unsuitable combinations of options are

deselected automatically.

❉

: optional / Yes : dosing required

For improved garment care spin speed is restricted to

800 rpm in this programme.

In this programme default spin speed can be increased

till 400 rpm.

AWM 8123/1

3gb05226a.fm5 Page 1 Friday, December 7, 2001 9:03 AM

Black Process Plate

5019 301 05226/A

Whirlpool is a registered trademark of Whirlpool USA.

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized

conditions in compliance with Standard IEC 60 456. Consumption data in the home may vary with respect to the values in

the table in relation to the water supply pressure and temperature, the load and the type of wash.

* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the

household conditions applicable at that time.

**To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains

the water out.

Add the detergents as described in the programme

table or in the chapter “Detergents and Additives” in

the booklet.

1. Turn the

programme selector knob

to the

desired programme.

2. The remaining time display shows the duration of

the chosen programme (in hours and minutes)

and the pilot lamp of the

“Start/Pause”

button

is flashing.

3. The programme sequence and the predefined

spin speed indication corresponding to the

selected programme lights up.

The recommended temperature (see the indicator)

can be altered by pressing “

” or “

” button.

Selecting any option the indication lights up.

When the combination of programme, additional

options and temperature is not possible, the

indication lights switch off automatically.

Unsuitable combinations of options are

deselected automatically.

“Easy Ironing” button

• Can be used together with Cotton and Synthetics

programmes to make ironing easier.

• Increases the water quantity and the clothes are

spun very soft.

“Eco Wash” button

• The duration of the wash is extended and the

temperature reduced to save up to 40% of energy

but maintaining good washing results.

“Prewash” button

• Only for heavily soiled loads (for example sand,

granular dirt) sensible. The cycle time increases

approximately 15 min.

“Intensive Rinse” button

• More water and a longer time in rinse cycle is added.

• This option is particularly suitable for areas with

very soft water, washing baby linen and helps

people with allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without

progressing to the final spin cycle to avoid creasing

and prevent colours from changing.

• This option is particularly recommended for the

programme “Synthetics” or “Delicates”.

• This function is particularly useful if you want to

postpone spinning to a later time, or if you want

to drain only.

Note:

The programme stops to “Rinse Hold” at the

time the “Rinse Hold” light in the programme flow

indication is on.

CONSUMPTION DATA

Programme

Temperature Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)*

White Cotton 95 6.0 54** 1.90 2:00

Coloured cotton 60 6.0 49 1.14 2:20

Coloured cotton 40 5.0 44 0.60 2:05

Synthetics 60 2.5 55 0.80 1:30

Synthetics 40 2.5 55 0.60 1:20

Superrapid 30 3.0 37 0.40 0:30

Delicates 30 1.5 60 0.50 0:45

Wool 40 1.0 60 0.45 0:40

Handwash 30 1.0 45 0.30 0:40

ADD DETERGENTS, CLOSE THE DOOR AND SELECT THE

PROGRAMME

SELECT ANY DESIRED OPTION

Terminate the “Rinse Hold” option:

• Press the “Rinse Hold” button again; the

programme will terminate automatically with

the final spin cycle for the present wash

programme.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain”

programme and press the

“Start/Pause”

button again when flashing.

“Spin Speed Reduction” button

• Every programme has an automatic predefined

maximum spin speed.

• Press the button to set another spin speed.

• If the spin speed “

” is selected, the final

spinning is cancelled but intermediate spin

peaks remain during rinse. The water is drained

out only.

The “Start Delay” allows to run the machine at the

consumer’s convenience, for example at night

when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button to select the

delay time by 1 to 23 hours;

• Press the

“Start/Pause”

button.

• The time delay indication disappears when the

programme starts and it is replaced by the

remaining time.

• The number of hours preselected can later be

reduced pressing again the “Start Delay”

button.

To cancel the “Start Delay”.

• Turn the programme selector to the “ ”

position.

• Reselect the desired programme and options

and press the

“Start/Pause”

button.

Open the tap and press the

“Start/Pause”

button.

The pilot lamp of the

“Start/Pause”

button lights

up.

The indicator lamps show the sequence reached in

the programme. After starting the programme, the

sequence indication runs from left to right through

Wash, Rinse, Spin.

When the sequence of the programme is finished

the corresponding lamp goes out.

The door can be opened when the “Door Open”

indication is on.

• The remaining time is on “0:00” and all the

lights of the programme sequence indication

are off.

1. Turn the programme selector to the

“”

position.

2. Turn the water supply tap off.

3. Open the door and unload the machine.

4. Close the tap and leave the door ajar to allow

the drum to dry out.

1. Press the

“Start/Pause”

button to pause the

programme. The light flashes.

2. Select the new programme (with temperature),

any options and another spin speed if you

want.

3. Press the

“Start/Pause”

button again. The

new programme continues at the same position

where the previous programme was

interrupted. Do not add detergent for this

programme.

1. Press the

“Start/Pause”

button to pause the

programme. The light flashes.

2. Set the programme selector to “Drain”. The

spin indicators show

“0”

and the remaining

time shows “0:02”.

3. Press the

“Start/Pause”

button to start the

drain programme.

START DELAY

PROGRAMME START

DOOR LOCK

PROGRAMME END

CHANGE THE PROGRAMME, TEMPERATURE,

OPTIONS AFTER PROGRAMME START

CANCEL A PROGRAMME BEFORE THE END

3gb05226a.fm5 Page 2 Friday, December 7, 2001 9:03 AM

Black Process Plate

Whirlpool AWM 8123/1 Program Chart

Whirlpool AWM 8123/1 Program Chart

Whirlpool AWM 8123/1 Program Chart

Related papers

Other documents