LED
UNDERWATER LIGHTS
DO-IT-YOURSELF SURFACE-MOUNT
INSTALLATION
BRIGHTER LIGHT THAN HALOGEN
WITH LESS AMP DRAW
10-YEAR LED WARRANTY
BRIGHTER LIGHT AND LOWER AMP DRAW
Compared to its 50-watt halogen competition, the
Attwood underwater lighting draws only a fraction
of the power while producing a significantly
brighter output.
EASIER, SURFACE MOUNT INSTALLATION
Aside from efficiency and performance, Attwood’s
underwater light is unmatched in ease of installation.
Today’s underwater lighting products are extremely
heavy, require a large thru-hull cut below the water
line and involve several additional steps for installation.
With only a small hole for wiring and 2 screws for
attachment, Attwood’s LED surface mount design
makes installation as quick and effortless as possible.
LONGER LASTING
Backed by a 10-year warranty, Attwood’s LED
underwater light is designed with the most
extreme conditions in mind. Attwood uses only the
highest grade stainless components to ensure the
product will be resistant to corrosion. To ensure the
light is watertight, all electrical components are
fully sealed with a proprietary potting compound.
These features translate into a lighting product that
the customer will likely never have to replace or
service as long as they own their boat!
CUSTOMIZABLE
As if groundbreaking design weren’t enough—
Attwood’s simple one-piece cover allows for
the ultimate in customization. The underwater
light cover can be designed specifically to a
customer’s requirements for aesthetics and
materials, providing the opportunity for a
completely custom look.
Stainless Steel Bezel, White LED 6510SS1 6510SS4
Blue LED 6511SS1 6511SS4
Green LED 6512SS1 6512SS4
Bronze, Chrome Plated White LED 6510CB1
t
—
Blue LED 6511CB1
t
—
Green LED 6512CB1
t
—
t
Available Fall 2008 *Individual Carton
LED Bulk Aftermarket
Description Color Packaging Packaging*
©2008 Attwood Corporation • 1016 N. Monroe St. • Lowell, MI 49331 • 616-897-9241 • www.attwoodmarine.com • A-LEDUWL-08
LED
UNDERWATER LIGHTS
Leveraging our proprietary design and development capabilities, Attwood has
developed a convenient solution to the growing demand for underwater lighting
applications. Attwood is proud to introduce its new, higher performance, surface
mount LED Underwater Light.
Requires (2) #8 x Stainless Steel Phillips Head Screws (not included)
PART NUMBERS & DIMENSIONS
-
1
-
2
