Endura Trilennium 3000 Installation guide

Brand: Endura

Model: Trilennium 3000

Type: Installation guide

Trilennium

3000 Multi-Point

Locking System

Replacement Instructions

SKU: BD-INST-TRIL3000

Revised: 03.14.2017

8817 West Market Street, Colfax, NC 27235

800.334.2006 Fax: 336.668.4478

www.enduraproducts.com

• Screwdriver or Drill

TOOLS REQUIRED:

• Trilennium

3000 Multi-Point Lock

• Mounting Screws

KIT INCLUDES:

STEP 1: REMOVE THE EXISTING LOCK, IF PRESENT, FROM THE ACTIVE DOOR PANEL

* 6/8 Lock shown- longer

locks will have more

screws.

Phillips

Head

Screws

Note: You must rst remove the handle or grip lever before removing the lock.

Phillips

Head

Screws

Loosen the screws that secure the

lock on the panel and remove the

existing lock. Clear out any debris

that may be in the exposed channel.

You do not need to remove the torx-

head screws.

Use caution while loosening the

screws, as without the securing

screws the lock may fall out.

STEP 2: INSTALL NEW LOCK

Place the new lock face out into the channel.

Ensure the lock faceplate is ush with the

panel. Screw the lock in using the screws

provided.

NOTES:

• Check that the latch bevel faces the

strikes on the jamb and is the same as the

one that you are removing

• Conrm that the panic release

function is on the interior side of the lock.

• You do not need to remove the torx-

head screws.

Endura Trilennium 3000 Installation guide

Endura Trilennium 3000 Installation guide

Endura Trilennium 3000 Installation guide

Related papers

Other documents