DT Research DT311Y Rugged Tablet User manual

Brand: DT Research

Model: DT311Y Rugged Tablet

Category: Tablets

Type: User manual

DT Research DT311Y Rugged Tablet offers a slim yet robust design with an 11.6” TFT display. Powered by Intel® Core™ i or Qualcomm octa-core processor, it provides optimal performance and power savings. The tablet integrates a bright display, USB ports, and networking elements like wireless LAN or optional 4G. You can configure it using the utilities and methods of the software operating system to suit your needs. The DT311Y supports a wide range of USB-based peripherals for various tasks, including software installation, data storage, and system updates.

Rugged Tablet

signage dtri com

DT Research, Inc.

2000 Concourse Drive, San Jose, CA 95131

INTRODUCTION

Thank you for acquiring the DT311Y/ 311Q, part of DT Research’s line of Rugged

Tablets. Featuring a slim yet robust enclosure, the DT311Y/ 311Q with 11.6” TFT

display is powered by the Intel® Core™ i or Qualcomm octa-core processor, oering

opmal combinaons of performance and power savings. The DT311Y/ 311Q is

available with Microso® Windows® or Android operang system. The soware

operang system features web browser, client/ server compung soware, media

player, accessories, and applicaons support.

PACKAGE CONTENTS

• One DT311Y/ 311Q with Baery Pack and Handstrap

• AC-DC Power Adapter with Power Cord

• Basic Operaon Guide

* If your DT311Y/ 311Q contains camera or barcode scanner, please refer to the

Tablet Modules Basic Operaon Guide for detailed operaon.

DT311Y/ 311Q

As an ENERGY STAR® Partner, DT Research Inc. follows the EPA’s product

qualicaon and cercaon process to ensure the products marked with

the ENERGY STAR® logo are ENERGY STAR® qualied for energy eciency.

The ENERGY STAR® program specicaons for computers were to promote

energy eciency and reduce air polluon through more energy-ecient

equipment in homes, oces, and factories. One way products achieve

this goal is by using the Microso Windows power management feature

to reduce power consumpon when the product is not in use. The power

management feature enables the computer to iniate a low-power or

“sleep” mode aer a period of user inacvity.

To take advantage of these potenal energy savings, users should use the

default power management sengs that are provided with ENERGY STAR

qualied computers. The default power management sengs on ENERGY

STAR® qualied computers are preset to behave in the following ways :

• Turn o display aer 10 minutes of user inacvity.

• Iniate a low power sleep mode for the computer aer 30 minutes of

user inacvity.

• Briey press the power buon will bring the computer out of sleep

mode.

Addional informaon on the ENERGY STAR® program, its environmental

benets and the potenal energy and nancial savings of the power

management feature can be found on the EPA ENERGY STAR® Power

Management Web site at hp://www.energystar.gov/powermanagement.

For the product take-back service informaon, please visit:

hp://www.dtresearch.com.tw/zh/About/csr.html

Button Functions

BUTTON ACTION

Power Buon

Programmable Buons

Baery Latch *Push the switch up to unlock the latch, then slide the latch le to remove the baery.

Input/ Output Ports

Headphone Jack

LAN Port

USB 3.0 Port

Smart Card Reader (DT311Y only)

DC IN Jack

Baery/Power LED

Sleep/Mode LED Brightness

Control buons

PRECAUTIONS

• Always exercise care when operang and handling the DT311Y/ 311Q.

• Do NOT apply excessive pressure to the display screen.

• We recommend using the Digital Pen (oponal) to keep the screen clean.

• Avoid prolonged exposure of the display panel to any strong heat source.

Wherever possible, the DT311Y/ 311Q should face away from direct light to

reduce glare.

• If the AC-DC power adapter is used to recharge or power the tablet, do NOT

use any AC-DC adapter other than the one provided or acquired from the

manufacturer or its partners.

• In the unlikely event that smoke, abnormal noise, or strange odor is present,

immediately power o the DT311Y/ 311Q and disconnect all power sources.

Report the problem to your device provider immediately.

• Never aempt to disassemble the DT311Y/ 311Q, as this will void the warranty.

BASIC FEATURES

The DT311Y/ 311Q rugged tablet integrates a bright display, USB ports, and

embedded networking elements such as wireless LAN or oponal 4G.

A DT311Y/ 311Q typically integrates an 802.11ac wireless LAN (WLAN) adapter

that may connect to other wireless devices or access points. If your DT311Y/ 311Q

does not come with such a network adapter, please consult your device provider to

establish the desired network connecvity.

NOTE:

To obtain protecon consistent with any IP rang for the device, the I/O (audio,

power, USB, card reader, etc.) port doors must be closed. If the IP protecon is

compromised by mishandling or misuse, such as by leaving port doors open or

improperly closed, any resulng product damage will not be covered under any

DT Research warranty.

OPERATION

Powering ON and OFF

To acvate the DT311Y/ 311Q, push and quickly release the Power Buon. The display

will come on in a few seconds. To put the DT311Y/ 311Q in Standby mode, push and

quickly release the Power Buon. To turn the DT311Y/ 311Q o for extended storage,

power o safely using any soware funcon that “shuts down computer” provided in

the soware operang system.

NOTE:

The baery pack shipped with your tablet may be low in power—please use the

AC-DC adapter with the DT311Y/ 311Q when seng up for the rst me to fully

charge the baery pack, or use the oponal baery charger kit.

NOTE:

When the baery pack is charging, the blue-colored Baery LED should blink

slowly. If plugging in the AC-DC adapter does not trigger this blinking acvity

and the LED stays dark, the baery pack(s) may have been drained substanally.

Try unplugging/ replugging the AC-DC adapter to the DT301Y a few mes to

acvate the charging process.

NOTE:

To conserve power, use (push and quick release) the Power Buon to put the

tablet in “Standby” mode while not in use. Pushing briey on the same buon

will wake up the system within seconds.

NOTE:

For DT311Y, avoid using the Power Buon (“hold 4+ seconds” feature) to turn

o the tablet—this form of hardware shutdown is intended to be a means of

recovery from lockups, and not as normal operaon.

Start Up

If the power up (from Standby mode or otherwise) is successful, the appropriate

interface will be displayed aer a launch sequence of several seconds. The wireless

LAN connecon may take 10-15 seconds to be established.

Conﬁguring the Mobile Tablet

The DT311Y/ 311Q may be congured using the ulies and methods dictated by

the soware operang system. The DT311Y/ 311Q should be congurable for various

properes such as user proles, network features, and several system elements.

Wireless Networking

Wireless LAN

The DT311Y/ 311Q is oen delivered with an embedded (user-inaccessible) 802.11ac

WLAN adapter equipped with a hidden custom antenna.

• Through the support of typical WLAN adapters, the DT311Y/ 311Q should be able

to detect all 802.11 access points in the vicinity for you to select the access point

of your choice for connecon.

• The SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT311Y/ 311Q

and the access points have to match. The SSID is case-sensive and it is recom-

mended that you enable WEP/WPA/WPA2 encrypon (or advanced alternaves)

for secure access.

• When WEP/WPA/WPA2 is enabled, you may need to consult your network

administrator or your networking equipment literature to properly congure

associated sengs such as Authencaon mode, etc.

• Refer to the access point operang manuals for seng up the 802.11 access

points.

USING THE MOBILE TABLET

Peripherals Support

Through its USB ports, the DT311Y/ 311Q supports a wide range of USB-based

peripherals. These peripherals are applicable for soware installaon, applicaons

storage, data storage, and system soware recovery and updates.

Replacing the Battery Pack

1. Slide the baery latch to the unlocked

posion.

2. Lift the battery pack off the

compartment.

3. Fit another baery pack into place.

4. Slide the latch to the locked posion.

5. If you want to purchase extra baery

packs, please contact your dealers, or

visit our Support page:

hps://www.dtresearch.com/en/

Support/contact.html

CAUTION:

There is danger of explosion if the baery is incorrectly replaced. Replace the

baery only with the Tablet manufacturer’s baery. Discard used baeries

according to the dealer’s instrucons.

CAUTION:

Do not aempt to disassemble the baery pack.

For More Support

Users can download the Tablet Modules Basic Operaon Guides from the DT Research

website.

If the DT311Y/ 311Q comes with a Mobile broadband module, please contact your

product and/or service provider for the SIM Card installaon procedures.

Federal Communication Commission Interference

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protecon against harmful interference in a residenal

installaon. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instrucons, may

cause harmful interference to radio communicaons. However, there is no

guarantee that interference will not occur in a parcular installaon. If this

equipment does cause harmful interference to radio or television recepon,

which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separaon between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Cauon: Any changes or modicaons not expressly approved by the

party responsible for compliance could void the user’s authority to operate this

equipment.

This device complies with Part 15 of the FCC Rules.

Operaon is subject to the following two condions: (1) This device may not

cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operaon.

This device and its antenna(s) must not be co-located or operang in conjuncon

with any other antenna or transmier.

This Class [B] digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du

Canada.

To Hold the Tablet

Le hand: grip the le back side of the tablet

with your le hand four index ngers, with

thumb resng on the top of the back side of the

tablet and palm securely against the back.

Right hand: grip the right back side of the tablet

with your right hand four index ngers, with

thumb resng on the top of the back side of the

tablet and palm securely against the back.

DT Research DT311Y Rugged Tablet User manual

Brand: DT Research

Model: DT311Y Rugged Tablet

Category: Tablets

Type: User manual

Download PDF

report