Moen T6142BL Dimensions Guide

Category
Sanitary ware
Type
Dimensions Guide

This manual is also suitable for

Specifications
DESCRIPTION
Metal construction with various nishes identiable by sux
1/2" IPS connections
Hot and cold temperature indicators available
Includes metal pop-up waste assembly
OPERATION
Lever style handles
Maximum handle rotation angle is 90° to full on for either handle
Hot side counterclockwise to open (clockwise to close)
Cold side clockwise to open (counterclockwise to close)
FLOW
Water usage is limited to these maximum ow rates as indicated by
the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
1234 cartridge design
Nonmetallic, nonferrous and stainless steel material
STANDARDS
Third party certied to WaterSense®, ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
Certied to NSF 61/9 & 372
Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to
the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Gibson™
Two-Handle Widespread
Lavatory Faucet
Models: T6142 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO
BE INSTALLED THROUGH 3 HOLES,
1-1/8" MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
8"
(203 mm)
Handle Base
2"
(51mm)
2-7/8"
(73mm)
3-1/4"
(82mm)
8-5/16"
(211mm)
6"
(152mm)
1.5" (38mm)
Max. Deck Thickness
5"
(127mm)
Spout Base
2-1/4"
(57mm)
11/18
M•pact System
  • Page 1 1

Moen T6142BL Dimensions Guide

Category
Sanitary ware
Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI