Generation Lighting WB1283GBZ Installation guide
- Type
- Installation guide
(E) 03/06
ASSEMB LY I NST RUCT I ONS FOR W B 1283
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Carefully unpack and identify all parts before
assembly. Bulb not included.
1. Follow enclosed supplement installation
instructions for electrical and fixture
installation onto house outlet box. If you
do not have an outlet box at desired
location to attach the fixture than hire a
qualified electrician to create one.
NOTE: At one end of fixture there is a
strip surrounding inside of frame. This end
of fixture has to be installed onto wall
facing down, otherwise the glass shade can
not be supported.
2. Install socket cover onto sockets by
slipping from above until it rests.
3. Install bulb (not included). See relamping
label located near socket area for type and
maximum allowed wattage.
4. Carefully slip glass shade at inside of
frame until it rests at bottom strip.
MUR R AY FEI SS
©M UR R AY FE I SS I M PORT LLC . A Quality Home Brands Company®
Bulb
(not included)
Cap Nut
Frame
1
3
2
Glass Shade
-
1
