2. FLEXCO
  3. FSK2 Skiver

FLEXCO FSK2 Skiver Operating instructions

  • Hello, I've reviewed the user manual for the FLEXCO FSK2 Skiver modification. This document provides step-by-step instructions on how to install a metal fence. I understand how to remove the handle and plastic assembly, and then attach the metal fence and handle. I'm available to answer any questions you have about this process.
  • What tool is needed to loosen the handle screws?
    What parts are removed in step 2?
    What is attached in step 3?
How to Modify Your FSK2 Skiver
with the Metal Fence
Step 1. Loosen existing handle screws with a 5/32"
hex wrench and set aside.
Step 3. Attach metal fence, handle and securely hand tighten remaining screws.
Step 2. Remove handle and plastic fence assembly.
2525 Wisconsin Avenue • Downers Grove, IL 60515-4200 U.S.A.
Telephone: 1-630-971-0150 • Fax: 1-630-971-1180 • E-mail: info@exco.com
Visit www.flexco.com for other Flexco locations and products.
©2015 Flexible Steel Lacing Company. 12-15. For Reorder: X4106
/