DJ SET
ORDERCODE D1210
Congratulations!
You have bought a great, innovative product from DAP Audio.
The DAP Audio DJ Set brings excitement to any venue. Whether you want simple plug-&-play action or a
sophisticated show, this product provides the effect you need.
You can rely on DAP Audio, for more excellent audio products.
We design and manufacture professional audio equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
You can get some of the best quality, best priced products on the market from DAP Audio.
So next time, turn to DAP Audio for more great audio equipment.
Always get the best -- with DAP Audio !
Thank you!
1
2
2
3
4
4
5
6
7
8
8
9
10
10
11
12
12
13
13
14
15
15
15
DAP Audio
DAP Audio DJ Set
Warning..…...................................................................................…………………………………………..
Safety-instructions………………………………………………………………………………………….….
Operating Determinations…………………………………………………………………………………….
Turntable T-500
Description..…..............................................................................……….…………………………………
Features………………………………………………………………………………….………………….….
Overview Back side..…………………………………………………………………………………….……
Installation..................................................................……………………………..…………………………
Set Up and Operation.....................................................................……..…………………………….……
Maintenance………..............................….......................................………..………….…….………….…..
Troubleshooting………..............................…................................………..………….…….………….…..
Product Specifications.................................................................……………….…….………………….
Set Mixer
Description..…..............................................................................……….…………………………………
Features………………………………………………………………………………….………………….….
Overview Back side..…………………………………………………………………………………….……
Installation..................................................................……………………………..…………………………
Set Up and Operation.....................................................................……..…………………………….……
Maintenance………..............................….......................................………..………….…….………….…..
Troubleshooting………..............................…................................………..………….…….………….…..
Product Specifications.................................................................……………….…….………………….
Headphone DH-105
Description..…..............................................................................……….…………………………………
Features………………………………………………………………………………….………………….….
Product Specifications.................................................................……………….…….………………….
2
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this system have to:
- be qualified
- follow the instructions of this manual
Before you initial start-up, please make sure that there is no damage caused by transportation. Should there
be any, consult your dealer and do not use the system.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the system are not subject to warranty.
This system contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the system.
• Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
• Never remove warning or informative labels from the unit.
• Never use anything to cover the ground contact.
• Do not forget to attach rubber belt to motor for correct operation.
• Do not place the unit in a location where it will be exposed to direct sunlight or near a heating
appliance.
• Do not place the unit in a location where it will be exposed to dust.
• Do not insert objects into air vents.
• Do not connect this system to a dimmerpack.
• Do not connect the AC power plug before assembly has been completed.
• Do not switch the system on and off in short intervals, as this would reduce the system’s life.
• Do not open this device.
• Only use system indoor, avoid contact with water or other liquids.
• Avoid flames and do not put close to flammable liquids or gases.
• Always disconnect power from the mains, when system is not used. Only handle the power-cord by
the plug. Never pull out the plug by tugging the power-cord.
• Make sure you don’t use the wrong kind of cables or defective cables.
CAUTION!
Keep this device away from rain and moisture!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dan
g
erous electric shock when touchin
g
the wires!
3
• Make sure that the signals into the mixer are balanced, otherwise hum could be created.
• Make sure you use DI boxes to balance unbalanced signals; All incoming signals should be clear.
• Make sure that the available voltage is not higher than stated on the rear panel.
• Make sure that the power-cord is never crimped or damaged. Check the system and the power-cord
from time to time.
• Make sure that there is sufficient room on all sides of the system for air circulation
• Always operate the unit with the AC ground wire connected to the electrical system ground.
• Always turn off the power when connecting or disconnecting.
• Prevent distortion! Make sure that all components connected have sufficient power ratings.
Otherwise distortion will be generated because the components are operated at their limits.
• Avoid ground loops! Always be sure to connect the power amps and the mixing console to the same
electrical circuit to ensure the same phase!
• If system is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
• If the system has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your system. Leave the
system switched off until it has reached room temperature.
• Keep this user’s manual for future consultation.
• Repairs, servicing and electric connection must be carried out by a qualified technician.
• WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
If this system is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, etc.
You endanger your own safety and the safety of others!
Improper installation can cause serious damage to people and property !
4
Description of the device
Features
The DJ Set is a professional plug and play DJ Set containing:
• 2x belt driven turntables T-500 with pitch control, quick start/stop, strong motor and belt brake
• 1x DJ mixer with user replaceable crossfader, 2 phono, 2 line, 1 microphone input, gain, treble and Bass
controls on channels
• 1x DH-105 Headphone
Overview T-500
Fig. 1
1. 45-rpm Adapter 11. Tonearm Clamp
2. Turntable Platter 12. Cueing Lever
3. Center Spindle 13. Anti-skate Knob
4. Strobe Dots 14. Counterweight
5. On/Off Switch 15. Spare phono cartridge slot
6. Start/Stop Button 16. Hinge for dust cover
7. Headshell 17. Stylus-Pressure Ring
8. Speed Select Buttons
9. Pitch Control Slider) located on Center detent
10. Tonearm
5
TURNTABLE DESCRIPTION REAR PANEL:
Fig. 2
18. Right RCA output jack (red)
19. Left RCA output jack (white)
20. Ground (GND)
6
Installation
Remove all packing materials from the Turntable. Check that all foam and plastic padding is removed.
Before use, check for the following parts included in the package with the main unit :Turntable Platter, Slip
mat, Dust Cover, 45-rpm adapter, Counterweight, Headshell.
VERY IMPORTANT!! - Do not forget to attach the rubber belt to the motor for correct operation. After
placing the turntable platter onto the turntable through the center spindle, move one of the large windows on
the Platter to the top right corner. Attach the rubber belt* around the motor
(see fig.3).
(*Rubber belt is already attached to the underside of the Turntable Platter.)
Assembly Turntable :
1. Save packaging for future transporting or shipping. Fig. 3
2. Set the 45-rpm adapter on the main unit.
3. Set the turntable platter onto the center spindle.
(a) Attach the rubber belt to the motor.
4. Set the slip mat on the platter.
5. Installation of the cartridge: When installing a cartridge, refer to the operating instructions for that
particular cartridge. During installation, attach the stylus protector to guard the stylus tip from damage.
(a) Connect the lead wires to the cartridge terminals. The terminals of most cartridges are color-coded.
Connect each lead wire to the terminal of the same color.
WHITE (L+)..............Left channel+ BLUE (L-)..............Left channel-
RED (R+)..............Right channel+ GREEN (R-)..............Right channel-
(b) Install the cartridge to the headshell and tighten it with screws, provided with the cartridge.
6. Insert the headshell into the front end of the tonearm, then turn the lock nut counterclockwise with the
headshell firmly held horizontally.
7. Slide the counterweight onto the tonearm, twist it lightly and it will screw onto the rear shaft of the
tonearm.
8. Adjustment of horizontal “zero” balance and stylus pressure:
(a) Remove the stylus protector from the headshell, do not touch the stylus tip during the adjustment.
(b) Set the cueing lever to the lowered position.
(c) Release the tonearm clamp and lift the tonearm from the armrest to free it.
(d) Rotate the counterweight, until the tonearm is approximately balanced horizontally (floats freely).
(e) Refasten the tonearm with the tonearm clamp.
(f) Hold the counterweight stationary with one hand and rotate only the stylus-pressure ring, to bring the
number “0” of the ring into alignment with the center line on the tonearm rear shaft.
(g) Rotate the counterweight including the stylus-pressure ring counterclockwise, until the scale shows
the value, corresponding to the pressure of the stylus used.
Should you use a separate stylus, please follow the manufacturer’s instructions.
9. Set the anti-skating control knob to the same value as the stylus pressure.
10. Install the dust cover to the main unit’s dust cover hinges.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
7
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Install this device on a flat surface.
Cartridge may pick up slight sound pressure or vibrations from the speakers coming along the floor or
though the air resulting in feedback or “howling” sound. Find a location that is very stable and vibration free.
The legs have functions for adjusting the height of the unit itself. Adjust the legs to stabilize the main body
horizontally.
Do not supply power before all components of the system are set up and connected properly.
Connections
1. Connect the power cord to the auxiliary power outlet on the rear panel of your amplifier, receiver or to a
AC outlet.
2. Connect the unit’s output terminals to the PHONO jack of your amplifier or receiver.
Output terminals Mixer (Receiver)
L (White) ---------------------------->L Channel
R (Red) -----------------------------> R Channel
GND (Spade) ---------------------> Ground
NOTE: Be sure to connect the ground terminals firmly to the mixer or receiver. Otherwise hum could be
created.
Operation
1. Turn the On/Off Switch clockwise to turn on the power. The speed indicator and the strobe-illuminator,
which is located beneath the On/Off switch, will light up.
2. Place a record on the slip mat. When playing a 45-rpm record with a large center hole, place the 45-rpm
adapter on the center spindle.
3. Set the speed to match the record.
4. Remove the stylus protector from the Headshell Stylus, release the Tonearm clamp.
5. Set the cueing lever to the up position.
6. Press the Start/Stop button, the turntable platter will start to rotate.
7. Move the tonearm over the desired groove.
8. Set the cueing lever to the down position, the tonearm will descend slowly onto the record and begin
playing.
9. When the record has ended, raise the cueing lever, move the tonearm onto the Tonearm clamp.
10.Press the Start/Stop button to stop the platter from rotating. Turn the On/Off Switch counterclockwise
to turn off the power.
• SUSPEND PLAY - Set the cueing lever to “UP” position during play, the stylus tip of the cartridge will be
lifted from the record.
Changing the Speed
1. As long as the pitch control is in center “detent” click position, the turntable is operated at selected speed.
2. The speed can be increased or decreased by 10% by the pitch control.
An incorrect adjustment done on purpose, can also be used to have the turntable rotate extremely slow or
fast. The strobe dots at the edge of the turntable are used for speed monitoring.
8
Maintenance
The Turntable T-500 requires almost no maintenance. However, you should keep the unit clean.
1. Disconnect the mains power supply.
2. Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
3. When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it with a new
one.
4. From time to time, the dust cover and turntable cabinet should be wiped with a soft, dry cloth. Do not
immerse in liquid.
5. Do not use alcohol or solvents. They may remove the paint or damage the luster.
Make sure the equipment is linked correct before supplying electric power.
Troubleshooting
Dap Audio Turntable T-500
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates
properly, do not carry out following steps.
If the turntable does not operate properly, refer servicing to a technician.
1. When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it with a new
one.
2. If all of the above appears to be O.K., plug the unit in again.
3. If you are unable to determine the cause of the problem, do not open the turntable, as this may damage
the unit and the warranty will become void.
4. Return the turntable to your Dap Audio dealer.
9
Product Specification
Model: Dap Audio Turntable T-500
Voltage: 230V-50Hz (CE)
Power consumption: 8W
Dimensions 450x350x145mm (LxWxH)
Weight: 4,25 kg
Design and product specifications are subject to change without prior notice.
10
Description of the device
Features
The DJ Set is a professional plug and play DJ Set containing:
• 2x belt driven turntables T-500 with pitch control, quick start/stop, strong motor and belt brake
• 1x DJ mixer with user replaceable crossfader, 2 phono, 2 line, 1 microphone input, gain, treble and Bass
controls on channels, powerful stereo headphone output, selectable fader cueing, High-end performance
audio signal
• 1x DH-105 Headphone
Overview Set Mixer
POWER
CH-1
CH-2
5
1
2
3
3
4
6
10
9 11
7 8
Fig. 4
11
1. Channel fader - Controls the individual source levels in the mix.
2. Input toggle switch - Selects which source will be active, depending on what you have connected to
the rear panel input section.
3. Treble and Bass EQ - Adjusts the high and low frequency levels of the input channels for good sound.
4. Channel Gain - Adjusts the pre-fader volume for cleaner sound.
5. Replaceable Crossfader - Achieves clean crossing between the two input channels. "Hard left" selects
Channel 1. "Hard right" selects Channel 2. With the crossfader centered, both assigned channels are
live. Use the crossfader for fast and seamless crossing from one selected channel to the other.
Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws, which
hold it in place, lift it out and disconnect its cable. Re-attach the new crossfader and screw the mounting
plate back onto the unit - you’re back in business!
6. Mic Input Gain - Adjusts microphone level.
7. Mic Input - Insert your Microphone with 1/4” plug in here.
8. Headphone Input - Insert in the 1/4” plug for your headphones here.
9. Channel Cue - Used to preview channel audio to your headphones. Listen here before bringing up
channel faders or moving the crossfader.
10. Headphone Level - Adjusts cue volume.
11. Master Fader - Controls the overall output level.
DESCRIPTION MIXER REAR PANEL:
AC 9V
ON OFF
16 17 15 14 12 13 14 12 13
Fig. 5
12. Phono Inputs - these connectors are used, your signal is fed directly to the high-quality RIAA phono
pre-amplifiers. Use this position only for turntables. Line level sources will overload the sensitive phono
pre-amps and will cause distortion.
13. Ground - Grounding nut for turntable connection. Always use this connection when using turntables.
(your turntable cable should have a grounding wire)
14. Line Inputs - Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD
players, HiFi VCRs, cassette and reel-to-reel tape decks, DAT machines, laser discs, tuners, even
synthesizers or other mixing consoles.
NOTE: Plug mono audio sources into both Left and Right inputs using a "Y" cable connector.
15. Stereo Main Outputs - Unbalanced RCA connectors controlled by the Master fader.
16. Power Connector - Plug in power adapter here and check the voltage level to match your country’s
standard.
17. Power Switch - turn the unit off and on with this switch.
12
Installation
Remove all packing materials from the Set Mixer. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage.
Install this device on a flat surface, not bending or curved.
Do not supply power before all components of the system are set up and connected properly.
Study this setup diagram. Make sure all faders are at "zero" and all devices are off. First, connect all input
sources and processors. Next, connect your microphone and monitor headphones. Finally, connect the
stereo outputs to the power amplifier(s) and/or audio receivers such as tape decks. Plug your mixer into
AC power. Now you are ready to switch everything on.
IMPORTANT: Always switch on your audio input sources such as turntables or CD players first, then your
mixer, and finally any amplifiers. When turning off, always reverse this operation by turning off amplifiers,
then your mixer, and then input devices.
TURNTABLE TURNTABLE
SOUND SYSTEM
TAPE DECK
CD PLAYER
POWER
SUPPLY
Fig. 6
13
Maintenance
The Set Mixer requires almost no maintenance. However, you should keep the unit clean. Disconnect the
mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp cloth.
Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
Dap Audio Set Mixer
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit operates
properly, do not carry out following steps.
If the mixer does not operate properly, refer servicing to a technician.
1. If you experience low sound or no sound at all with your usual settings, unplug the mixer.
2. Check power from the wall, all cables etc.
3. If all of the above appears to be O.K., plug the unit in again.
4. If you are unable to determine the cause of the problem, do not open the mixer and make alterations to
the mixer, as this may damage the unit and the warranty will become void.
5. Return the mixer to your Dap Audio dealer.
14
Product Specification
Model: Dap Audio Set Mixer
Voltage: AC 9V, 500mA
Dimensions 236x192x82mm (LxWxH)
Weight: 2,8 kg
Design and product specifications are subject to change without prior notice.
15
Description of the device
Features
The DJ Set is a professional plug and play DJ Set containing:
• 2x belt driven turntables T-500 with pitch control, quick start/stop, strong motor and belt brake
• 1x DJ mixer with user replaceable crossfader, 2 phono, 2 line, 1 microphone input, gain, treble and Bass
controls on channels, powerful stereo headphone output, selectable fader cueing, High-end performance
audio signal
• 1x DH-105 Headphone
Overview Headphone DH-105
Product Specification
Model: Dap Audio DH-105
Ø40mm ferrite with Mylar cone speaker
Impedance 32Ω ± 15%
Sensitivity 105 dB ± 3 dB at 1 Khz
Frequency response 20 Hz – 20 Khz
Max. Power input 100 mW
Rated power input 1 mW
Cordlength 4 meters
Plug 3,5mm goldplated / adapter to 6,3mm included
Weight: 279g
Design and product specifications are subject to change without prior notice.
2003 Dap Audio.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
DAPAudio QUICK START GUIDE User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Sony PMPK-DJ9000 User manual
-
Stanton M.201 Owner's manual
-
Crosley C100BT User manual
-
Stanton DJLab 1.1 User manual
-
-
-
-
-
-
Numark TT500 User manual