Marshalltown BRR2000 Operating instructions

Parts list:

1-Rake head w/ wheels

2-Fiber glass poles (4)

3-Adapter

4-Upper angle tube

5-Coupler (2)

6-End grip

Assembly:

Step 1: Connect the adapter(3) to the rake head with wheels(1).

Step 2: Attach one pole(2) to adapter (line up holes with the push pins to snap into place).

Step 3: Place the upper angle tube(4) onto pole.

Step 4: Connect the second pole onto the adapter, then place one coupler onto the other end of pole

Step 5: Attach the third pole onto the coupler.

Step 6: Put the second coupler onto pole, and add the last pole to the coupler.

Step 7: Place end grip(6) onto last pole.

BIGRIGRAKE