Marshalltown BRR2000 Operating instructions

Hello! I've reviewed the user manual for the Avalanche BIGRIGRAKE. This document provides clear instructions on how to assemble the rake, including connecting the various parts like the poles, couplers, and end grip. I'm ready to answer any questions you may have about the assembly process or the components of this snow rake.
What parts are included in the BIGRIGRAKE?

How do I start assembling the BIGRIGRAKE?

What is the last step in assembling the BIGRIGRAKE?

Parts list:

1-Rake head w/ wheels

2-Fiber glass poles (4)

3-Adapter

4-Upper angle tube

5-Coupler (2)

6-End grip

Assembly:

Step 1: Connect the adapter(3) to the rake head with wheels(1).

Step 2: Attach one pole(2) to adapter (line up holes with the push pins to snap into place).

Step 3: Place the upper angle tube(4) onto pole.

Step 4: Connect the second pole onto the adapter, then place one coupler onto the other end of pole

Step 5: Attach the third pole onto the coupler.

Step 6: Put the second coupler onto pole, and add the last pole to the coupler.

Step 7: Place end grip(6) onto last pole.

BIGRIGRAKE

®

BY

/

Other documents