2. Duinotech
  3. XC4336

Duinotech XC4336 Owner's manual

  • Hello! I've reviewed the XC4336 User Guide and am ready to assist you with questions about the sensor shield adapter. The document details how to connect the adapter using jumper wires or alligator clips, and highlights its power output from Micro:bit and support for multiple GPIOs.
  • How can I connect the sensor shield adapter?
    What power output does the adapter provide?
    What GPIOs are supported?
s
Australia New Zealand
www.jaycar.com.au www.jaycar.co.nz
[email protected] [email protected]
1800 022 888 0800 452 922 Page 1 of 1
XC4336 User Guide
XC4336 User Guide
To use the sensor shield adapter, you can either directly plug onto the connections on the board using jumper wires,
or via alligator clips on the side of the board.
Colour
Type
Power output from Micro:bit
Ground connections
GPIOs 0 to 20
Alligator clip connections – GND, 3V & 10 GPIOs
/