Silvercrest 294956 Owner's manual

PROTECTIVE SMARTPHONE CASE /

FUNDA PROTECTORA PARA

SMARTPHONE

IAN 294956

PROTECTIVE SMARTPHONE CASE

Operation and Safety Notes

FUNDA PROTECTORA PARA

SMARTPHONE

Instrucciones de utilización y de seguridad

US-EN Operation and Safety Notes Page 3

US-ES Instrucciones de utilización

y de seguridad Página 26

3 US-EN

Description of

signal words .......................... Page 5

Customer service ................ Page 5

List of pictograms

used and warnings .......... Page 6

Introduction ............................ Page 6

Intended use ................................. Page 7

Trademark notice ......................... Page 7

Contents ........................................ Page 8

Before use ..................................... Page 8

Parts description ........................... Page 8

Technical data .............................. Page 11

Safety notes ........................... Page 12

Before use ................................ Page 17

Charging the battery .................... Page 17

Operation and use ........... Page 18

Power on the product .................. Page 18

Power off the product .................. Page 18

Select different LED light effect .... Page 18

Troubleshooting ................. Page 19

Cleaning and care ............. Page 20

4 US-EN

Storage during

non-use ....................................... Page 21

Disposal ..................................... Page 21

Three year limited

warranty .................................. Page 23

5 US-EN

DESCRIPTION OF

SIGNAL WORDS

WARNING indicates a hazardous

situation that, if not avoided, could result

in death or serious injury.

NOTICE indicates information considered

important, but not hazard related (e.g.

messages related to property damage).

CUSTOMER SERVICE

Call customer service at

1 (844) 543-5872

Visit the Website Customer Service

Platform at

www.lidl.com/contact-us

Visit a LIDL store for further assistance.

IAN 294956 Please have your

IAN number ready.

6 US-EN

List of pictograms used

and warnings

Direct current

Observe warnings and

safety notes!

Protective Smartphone Case

Introduction

Congratulations on your purchase. You have

selected a quality product. The instructions for

use are a part of the product. They contain

important information about the safety, use

and disposal of the product. Before using the

product, please learn about all the safety in-

formation and usage instructions. Only use the

product as described and for the speciﬁed

applications. If you lend the product to some-

one else, please also give all the instructions.

7 US-EN

Intended use

This product is an IT device which is solely in-

tended to be used to show diﬀerent pattern

of LED lighting when detecting sound in a

microphone. This product is not intended for

commercial use. The manufacturer is not

liable for damages due to improper use.

Trademark notice

- USB® is a registered trademark of USB

Implementers Forum, Inc.

- Any other names and products may be

trademarks or registered trademarks of

their respective owners.

- The SilverCrest trademark and brand

are the property of their respective

owner.

- iPhone is a trademark of Apple Inc., reg-

istered in the U.S. and other countries.

8 US-EN

Contents

1 Protective smartphone case with

LED lighting

1 USB cable

1 Instructions for use

Before use

Note: Remove all packaging materials from

the product.

Please remove the paper foil on the

display before use.

Please also check the package contents

for damage. If you notice any damage or

missing parts, please contact the retailer

where this product was purchased.

Parts description

1 LED light strip (circumference of

the protective case)

2 Green LED

3 Green LED

4 Blue LED

5 Blue LED

9 US-EN

6 Microphone

7 Mode buttons (3 diﬀerent LED lighting

eﬀect)

8 Micro-USB socket

9 On / Oﬀ button

10 Instructions for use

11 USB plug

12 Micro-USB plug

13 USB cable

14 Blue LED

10 US-EN

OUTDOOR-POWERBANK /

BATTERIE EXTERNE

POWERBANK D’EXTÉRIEUR

IAN 293106

OUTDOOR-POWERBANK

Bedienungs- und Sicherheitshinweise

OUTDOOR POWER BANK

Operation and Safety Notes

BATTERIE EXTERNE

POWERBANK D’EXTÉRIEUR

Instructions d‘utilisation et

consignes de sécurité

OUTDOOR POWERBANK

Bedienings- en veiligheidsinstructies

BATERÍA EXTERNA

PARA EXTERIORES

Instrucciones de utilización y

de seguridad

POWERBANK PARA

ATIVIDADES AO AR LIVRE

Instruções de utilização e de segurança

OUTDOOR POWERBANKA

P

okyny pro obsluhu a bezpečnostní pokyny

8

32

1

4

6

5

9

14

7

11

1213

PROTECTIVE SMARTPHONE CASE /

FUNDA PROTECTORA PARA

SMARTPHONE

IAN 294956

PROTECTIVE SMARTPHONE CASE

Operation and Safety Notes

FUNDA PROTECTORA PARA

SMARTPHONE

Instrucciones de utilización y de seguridad

294956_A_silv_Protective case_cover_US.indd 2 02.11.17 10:35

10

11 US-EN

Technical data

Built-in battery: 3.7 V / 250 mAh

(Lithium polymer)

Input voltage / current: 5 V , 500 mA

Type of smartphone

suited: iPhone 7 Plus

Colour of LED: Red, green, blue

LED quantity: 31 pcs

Operating time

(at medium volume): 8 hours

Charging time: 3 hours

Operating temperature: 41 °F–95 °F

(5 °C–35 °C)

Storage temperature: 32 °F–113 °F

(0 °C–45 °C)

Humidity

(no condensation): 10 %–70 %

Dimensions: 6.34 in x 3.15 in x

0.51 in (161 mm x

80 mm x 13 mm)

Weight: 0.12 lb (55 g)

12 US-EN

Safety notes

Please familiarize yourself with all instructions

for use and safety notes before using the

product for the ﬁrst time. Include all docu-

mentation when passing this product on to

others.

Failure to observe

the following warnings can result in

death or serious injuries.

Check the product for visible external

damage before use. Do not use the

product if damaged or has been

dropped.

This product may be used by children

age 8 years and up, as well as by per-

sons with physical, sensory or mental

impairments or lacking experience and /

or knowledge, provided they are super-

vised or instructed in the safe use of the

product and understand the associated

risks. Do not allow children to play with

the product. Never allow children to clean

or maintain this product unsupervised.

13 US-EN

Packaging materials are not a toy. Keep

all packaging materials out of the reach

of children. Suﬀocation hazard!

Do not operate the product near open

ﬂames.

The product is not designed for use in

rooms with high temperatures or humid-

ity (i.e bathrooms) or where a great

amount of dust is generated.

Never open the product casing. This

product has no internal parts requiring

maintenance.

Do not independently convert or modify

the product.

Repairs to the product must be performed

by authorized specialized companies or

customer service. Improper repairs may

place the user in considerable danger.

They will also void the warranty.

Do not expose the product to dripping

water or splashing water and do not

place containers ﬁlled with liquids such

as vases or open drinks on top of or

next to the product.

Immediately switch the product oﬀ and

remove the charging cable from the

product if you smell burning or see

14 US-EN

smoke. Have the product inspected by a

qualiﬁed technician before using it again.

When using a USB power supply, the

socket used must always be easily ac-

cessible so the USB power supply can

quickly be disconnected from the socket

in the case of emergency. Please also

refer to the manufacturer‘s instruction

manual.

Improper handling of lithium polymer

batteries can result in ﬁre, explosions,

hazardous substances leaking or other

dangerous situations! Do not throw the

product into ﬁre, as the built-in battery

could explode.

Observe the usage restrictions and

prohibitions of use for battery-operated

products in situations which may be

hazardous, e.g. gas stations, airports,

hospitals, etc.

Never cover the product while charging.

This product complies with part 15 of

the FCC Rules. Operation is subject to

the following two conditions:

(1) This product may not cause harmful

interference, and

15 US-EN

(2) this product must accept any interfer-

ence received, including interference

that may cause undesired operation.

Any changes or modiﬁcations not expressly

approved by the party responsible for

compliance could void the user’s author-

ity to operate the product.

Note: This product has been tested

and complies with the limits for a Class

B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed

to provide reasonable protection against

harmful interference in a residential in-

stallation. This product generates, uses

and can radiate radio frequency energy

and, if not installed and used in accor-

dance with the instructions, may cause

harmful interference to radio communi-

cations.

However, there is no guarantee that in-

terference will not occur in a particular

installation. If this product causes harm-

ful interference to radio or television re-

ception, which can be determined by

turning the product oﬀ and on, the user

is encouraged to try and correct the in-

terference by one or more of the follow-

ing measures:

16 US-EN

• Reorient or relocate the receiving

antenna.

• Increase the separation between the

product and receiver.

• Connect the equipment to an outlet on

a diﬀerent circuit than the one the re-

ceiver is connected to.

• Consult the dealer or an experienced

radio / TV technician for help.

Always use the product on a ﬂat and

smooth surface. The product could be

damaged if it falls.

Do not expose the product to direct

sunlight or high temperatures. It may

otherwise overheat and be damaged

beyond repair.

Do not operate the product near heat

sources such as heaters or other devices

generating heat.

Do not expose the product to extremely

high temperatures. This especially applies

to storing the product in your car. The car

and glove compartment could become

extremely hot over time. Remove electric

and electronic devices from the car.

17 US-EN

Do not use the product immediately

after bringing it from a cold room to a

warm room. Allow the product to

acclimatise before you switch it on.

Before use

Before use, verify the package contents

are complete and undamaged.

Charging the battery

The battery must be charged prior to ﬁrst

use. Plug the micro-USB plug 12 on the

USB cable 13 into the micro-USB

socket 8 on the product.

Plug the USB plug 11 on the USB cable

13 into the USB port on a PC or a USB

adapter (not included).

Note: The LED 14 ﬂash blue while

charging. Once the battery is fully

charged, the LED 2 and 3 will remain

green.

Once fully charged, remove the

micro-USB plug 12 from the product.

18 US-EN

Operation and use

Power on the product

Brieﬂy press On / Oﬀ button 9 to switch

on the product. The LED 2 and 3 light

up green for 2 seconds.

The product will turn oﬀ automatically if

idle for 30 seconds.

Power oﬀ the product

Brieﬂy press On / Oﬀ button 9 to switch

oﬀ the product. The LED 4 and 5 light

up blue for 2 seconds.

Select diﬀerent

LED light eﬀect

After the product is switched on, brieﬂy

press either one of the three Mode but-

tons 7 to select diﬀerent LED lighting

eﬀect.

LED light strip 1 (circumference of the

protective case) ﬂashes continuously

when the Microphone 6 is activated

19 US-EN

by sound (e.g. smartphone’s ringing

tones or human voice).

Three LED ﬂashing patterns can be

selected depending on which mode

buttons 7 you press.

The LED light strip 1 stop ﬂashing if

there is no sound.

Troubleshooting

= Problem

= Cause

= Solution

The product is not being charged.

The product may not be connected

properly.

Check the connection.

LED light strip 1 does not flash

when there is sound

The battery is drained.

Recharge the battery as described in

“Charging the battery“.

The product is switched oﬀ.

Switch on the product by brieﬂy pressing

On / Oﬀ button 9.

20 US-EN

The sound source is too far from the

Microphone 6, or too weak.

Put the sound source closer to the Micro-

phone 6 or increase the volume of the

sound source.

Cleaning and care

This product has no internal parts requiring

maintenance. Moisture entering the product

may result in damage.

Ensure no moisture enters the product

during cleaning to prevent damaging

the product beyond repair.

Do not use abrasive, solvent-based or

aggressive cleaners. These can damage

the surface of the product.

Only clean the product with a slightly

damp cloth and mild dish soap.

Page is loading ...

Silvercrest 294956 Owner's manual

Silvercrest 294956 Owner's manual

in other languages

Related papers