LG 55UB850T Owner's manual

Brand: LG

Model: 55UB850T

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

P/NO : MFL67987072 (1504-REV06)

Please read this manual carefully before operating your set and retain it

for future reference.

OWNER’S MANUAL

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

www.lg.com

49UB850T

55UB850T

60UB850T

65UB930T

65UB950T

55UC970T

65UC970T

79UG880T

65UB980T

79UB980T

84UB980T

98UB980T

105UC9T

*MFL67987072*

Click! User Guide

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak

performance of your product.



Do not use this apparatus near water.

Short-circuit

Breaker

Power Supply



Clean only with a dry cloth.

Short-circuit

Breaker

Power Supply



Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

Short-circuit

Breaker

Power Supply



Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that

produce heat.

Short-circuit

Breaker

Power Supply



Do not defeat the safety purpose of the

polarized or grounding-type plug. A polarized

plug has two blades with one wider than the

other. A grounding type plug has two blades

and a third grounding prong. The wide blade

or the third prong are provided for your safety.

If the provided plug does not fit into your

outlet, consult an electrician for replacement

of the obsolete outlet (Can differ by country).

Short-circuit

Breaker

Power Supply



Do not press strongly upon the panel with

a hand or a sharp object such as a nail,

pencil or pen, or make a scratch on it.

Short-circuit

Breaker

Power Supply

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER

TO QUALIFIED SERVICE PERSONNEL.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated dangerous voltage

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of

electric shock to persons.

WARNING/CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The exclamation point within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

WARNING/CAUTION

- TO REDUCE THE RISK OF FIRE AND

ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

WARNING

If you ignore the warning message, you may

be seriously injured or there is a possibility of

accident or death.

CAUTION

If you ignore the caution message, you may

be slightly injured or the product may be

damaged.

NOTE

The note helps you understand and use the

product safely. Please read the note carefully

before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Short-circuit

Breaker

Power Supply

ENGENGLISH

IMPORTANT SAFETY INSTRUCTIONS



Protect the power cord from being

walked on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

Short-circuit

Breaker

Power Supply



Use only attachments/accessories specified

by the manufacturer.

Short-circuit

Breaker

Power Supply



Use only with a cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

Short-circuit

Breaker

Power Supply



Unplug this apparatus during lightning

storms or when unused for long periods of

time.

Short-circuit

Breaker

Power Supply



Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or has

been dropped.

Short-circuit

Breaker

Power Supply



Do not stick metal objects or any other

conductive material into the power cord.

Do not touch the end of the power cord

while it is plugged in.



Keep the packing anti-moisture material or

vinyl packing out of the reach of children.

Anti-moisture material is harmful if

swallowed. If swallowed by mistake, force

the patient to vomit and visit the nearest

hospital. Additionally, vinyl packing can

cause suffocation. Keep it out of the reach

of children.



CAUTION concerning the Power Cord

(Can differ by country):

Check the specification page of this owner’s

manual to be certain. Do not connect too

many appliances to the same AC power

outlet as this could result in fire or electric

shock. Do not overload wall outlets.

Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power

cords, or damaged or cracked wire insulation

are dangerous. Any of these conditions could

result in electric shock or fire. Periodically

examine the cord of your appliance, and

if its appearance indicates damage or

deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with

an exact replacement part by an authorized

service. Protect the power cord from physical

or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall

outlets, and the point where the cord exits

the appliance. Do not move the TV with

the power cord plugged in. Do not use a

damaged or loose power cord. Be sure do

grasp the plug when unplugging the power

cord. Do not pull on the power cord to unplug

the TV.

Short-circuit

Breaker

Power Supply



Warning

- To reduce the risk of fire or

electrical shock, do not expose this product

to rain, moisture or other liquids. Do not

touch the TV with wet hands. Do not install

this product near flammable objects such

as gasoline or candles, or expose the TV to

direct air conditioning.

Short-circuit

Breaker

Power Supply



Do not expose to dripping or splashing

and do not place objects filled with liquids,

such as vases, cups, etc. on or over the

apparatus (e.g. on shelves above the unit).

Short-circuit

Breaker

Power Supply

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS



Grounding

(Except for devices which are not grounded.)

Ensure that you connect the earth ground

wire to prevent possible electric shock (i.e. a

TV with a three-prong grounded AC plug must

be connected to a three-prong grounded AC

outlet). If grounding methods are not possible,

have a qualified electrician install a separate

circuit breaker. Do not try to ground the unit

by connecting it to telephone wires, lightning

rods, or gas pipes.

Short-circuit

Breaker

Power Supply



As long as this unit is connected to the AC

wall outlet, it is not disconnected from the AC

power source even if the unit is turned off.



Do not attempt to modify this product in

any way without written authorization from

LG Electronics. Unauthorized modification

could void the user’s authority to operate this

product.



Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow

the precautions below. An outdoor antenna

system should not be located in the vicinity of

overhead power lines or other electric light or

power circuits, or where it can come in contact

with such power lines or circuits as death or

serious injury can occur. Be sure the antenna

system is grounded so as to provide some

protection against voltage surges and built-

up static charges. Section 810 of the National

Electrical Code (NEC) in the U.S.A. provides

information with respect to proper grounding of

the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location

of antenna discharge unit, connection to

grounding electrodes and requirements for the

grounding electrode.

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

Short-circuit

Breaker

Power Supply

Ground Clamp

Grounding Conductor

(NEC Section 810-21)

Antenna Lead in Wire

Electric Service

Equipment

Antenna Discharge Unit

(NEC Section 810-20)

Ground Clamp

Power Service Grounding

Electrode System

(NEC Art 250, Part H)

NEC: National Electrical Code



Cleaning

When cleaning, unplug the power cord and

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

may occur. Do not clean with chemicals

such as alcohol, thinners or benzine.



Moving

Make sure the product is turned off,

unplugged and all cables have been

removed. It may take 2 or more people to

carry larger TVs. Do not press or put stress

on the front panel of the TV.



Ventilation

Install your TV where there is proper

ventilation. Do not install in a confined

space such as a bookcase. Do not cover the

product with cloth or other materials while

plugged. Do not install in excessively dusty

places.



If you smell smoke or other odors coming

from the TV, unplug the power cord and

contact an authorized service center.



Keep the product away from direct sunlight.



Never touch this apparatus or antenna

during a thunder or lightning storm.



When mounting a TV on the wall, make sure

not to install the TV by hanging the power

and signal cables on the back of the TV.



Do not allow an impact shock or any objects

to fall into the product, and do not drop

anything onto the screen.



DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The power plug is the disconnecting device.

In case of an emergency, the power plug

must remain readily accessible.



Batteries

Store the accessories (battery, etc.) in a safe

location out of the reach of children.



This apparatus use batteries. In your

community there might be regulations

that require you to dispose of these

batteries properly due to environmental

considerations. Please contact your

local authorities for disposal or recycling

information.



Do not dispose of batteries in a fire.



Do not short circuit, disassemble or allow

the batteries to overheat.



Do not use high voltage electrical equipment

near the TV, (e.g., a bug zapper).This may

result in product malfunction.

ENGENGLISH

IMPORTANT SAFETY INSTRUCTIONS



Dot Defect

The Plasma or LCD panel is a high

technology product with resolution of

two million to six million pixels. In a very

few cases, you could see fine dots on the

screen while you’re viewing the TV. Those

dots are deactivated pixels and do not

affect the performance and reliability of the

TV.



Generated Sound

Cracking noise A cracking noise that occurs

when watching or turning off the TV is

generated by plastic thermal contraction

due to temperature and humidity. This

noise is common for products where

thermal deformation is required.

Electrical circuit humming/panel buzzing: A

low level noise is generated from a high-

speed switching circuit, which supplies

a large amount of current to operate a

product. It varies depending upon the

product.

This generated sound does not affect the

performance and reliability of the product.



Take care not to touch the ventilation

openings. When watching the TV for

a long period, the ventilation openings

may become hot. This does not affect

the performance of the product or cause

defects in the product.



Do not install this product on a wall if it

could be exposed to oil or oil mist. This

may damage the product and cause it to

fall.



If the TV feels cold to the touch, there may

be a small flicker when it is turned on. This

is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on

the screen, appearing as tiny red, green, or

blue spots. However, they have no adverse

effect on the TV’s performance. Avoid

touching the LCD screen or holding your

finger(s) against it for long periods of time.

Doing so may produce some temporary

distortion effects on the screen.

Preventing Image burn or Burn-in on

your TV screen



If a fixed image displays on the TV screen

for a long period of time, it will be imprinted

and become a permanent disfigurement on

the screen. This is image burn or burn-in

and not covered by the warranty.



Watching the TV for a long period of time

with the screen ratio of 4:3 (for the 21:9

model, 4:3 and 16:9) may cause image

burn-in on the letterboxed area of the

screen. When watching the TV for a long

period of time, please use the default

screen ratio of 16:9 or 21:9 depending

upon the product.



Avoid displaying a fixed image on the TV

screen for a long period of time (2 or more

hours for LCD, 1 or more hours for the

Plasma TV) to prevent image burn.

ENG

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Viewing 3D Imaging

WARNING

Viewing Environment



Viewing Time

When watching 3D contents, take 5 to

15 minute breaks every hour. Viewing 3D

contents for a long period of time may cause

headache, dizziness, fatigue, or eye strain.

Those that have a photosensitive seizure or

chronic illness



Some users may experience a seizure or

other abnormal symptoms when they are

exposed to a flashing light or particular

pattern from 3D contents.



Do not watch 3D videos if you feel nausea,

are pregnant, and/ or have a chronic illness

such as epilepsy, cardiac disorder, or blood

pressure disease, etc.



3D Contents are not recommended to

those who suffer from stereo blindness

or stereo anomaly. Double images or

discomfort in viewing may be experienced.



If you have strabismus (cross-eyed),

amblyopia (weak eyesight) or astigmatism,

you may have trouble sensing depth and

easily feel fatigue due to double images. It

is advised to take frequent breaks than the

average adult.



If your eyesight varies between your right

and left eye, put on your glasses before

watching 3D contents.

Symptoms which require discontinuation or

refraining from watching 3D contents



Do not watch 3D contents when you feel

fatigue from lack of sleep, overwork, or

drinking.



When these symptoms are experienced,

stop using/watching 3D contents and get

enough rest until the symptom subsides.

- Consult your doctor when the symptoms

persist. Symptoms may include headache,

eyeball pain, dizziness, nausea, palpitation,

blurriness, discomfort, double image,

eyestrain, or fatigue.

CAUTION

Viewing Environment



Viewing Distance

Maintain a distance of at least twice the

screen diagonal length when watching 3D

contents. If you feel discomfort in viewing

3D contents, move further from the TV.

Viewing Age



Infants / Children

- Usage/ Viewing 3D contents for children

under the age of 5 is prohibited.

- Children under the age of 10 may overreact

and become overly excited because their

vision is in development (for example: trying

to touch the screen or trying to jump into it.

Special monitoring and extra attention are

required for children watching 3D contents.

- Children have greater binocular disparity of

3D presentations than adults because the

distance between the eyes is shorter than

one of adults. Therefore they will perceive

more stereoscopic depth compared to

adults for the same 3D image.



Teenagers

- Teenagers may be stimulated to light

coming from 3D videos. Advise them not

to watch 3D videos for a long time when

they are tired.



Elderly

- The elderly may perceive less of a 3D

effect than the youth. Do not sit closer to

the TV than the recommended distance.

Cautions when using the 3D glasses



Make sure to use LG 3D glasses.

Otherwise, you may not be able to view 3D

videos properly.



Do not use 3D glasses instead of your

normal glasses, sunglasses or protective

goggles.



Using modified 3D glasses may cause eye

strain or image distortion.



Do not keep your 3D glasses in extremely

high or low temperatures. It will cause

deformation.



The 3D glasses are fragile and are easy to be

scratched. Always use a soft, clean piece of

cloth when wiping the lenses. Do not scratch

the lenses of the 3D glasses with sharp

objects or clean/wipe them with chemicals.

ENGENGLISH

LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit

www.lg.com

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained

in this product, please visit

http://opensource.lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices

are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the

cost of performing such distribution (such as the cost of media, shipping, and handling) upon email

request to

[email protected].

This offer is valid for three (3) years from the date on which you

purchased the product.

ENG

ENGLISH

TABLE OF CONTENTS



Image shown may differ from your TV.



Your TV’s OSD (On Screen Display) may

differ slightly from that shown in this

manual.



The available menus and options may

differ from the input source or product

model that you are using.



New features may be added to this TV in

the future.

NOTE

2 IMPORTANT SAFETY

INSTRUCTIONS

6 Viewing 3D Imaging

7 LICENSES

7 OPEN SOURCE SOFTWARE

NOTICE

8 TABLE OF CONTENTS

9 INSTALLATION PROCEDURE

9 ASSEMBLING AND PREPARING

9 Unpacking

12 Optional Extras

13 Parts and Buttons

15 - Using the joystick button

16 Lifting and Moving the TV

16 Setting up the TV

16 - Attaching the Stand

21 - Mounting on a Table

22 - Mounting On a Wall

24 - Using Sliding Speaker

25 - Attaching the AV Port Cover

26 - Tidying Cables

27 Using Built-in Camera

28 - Preparing Built-in Camera

28 - Names of Parts for the Built-In Camera

28 - Checking the Camera’s Shooting

Range

29 MAKING CONNECTIONS

29 Connecting to an Antenna or Cable

30 Connecting to a HD receiver, DVD

Player, or VCR

30 - HDMI Connection

31 - DVI to HDMI Connection

32 - Connecting to a Mobile Phone

33 - Component Connection

34 - Composite Connection

35 Connecting to a PC

35 - HDMI Connection or DVI to HDMI

Connection

37 Connecting to an Audio System

37 - Digital Optical Audio Connection

38 Connecting Headphones

39 Connecting a USB Drive

40 MAGIC REMOTE FUNCTIONS

41 Registering Magic Remote

41 How to Use Magic Remote

41 Precautions to Take When Using the

Magic Remote

42 USING THE USER GUIDE

43 SPECIFICATIONS

46 MAINTENANCE

46 Cleaning Your TV

46 - Screen, Frame, Cabinet, and Stand

46 - Power Cord

47 TROUBLESHOOTING

47 EXTERNAL CONTROL DEVICE

SETUP

TABLE OF CONTENTS

ENGENGLISH

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

INSTALLATION PROCEDURE

Open the package and make sure all the accessories are included.

Attach the stand to the TV set.

Connect an external device to the TV set.

Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

When the TV is turned on for the first time after being shipped from the factory, initialization of

the TV may take approximately one minute.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the

local dealer where you purchased your product. The illustrations in this manual may differ from the

actual product and item.



Do not use any unapproved items to ensure the safety and product life span.



Any damages or injuries by using unapproved items are not covered by the warranty.



The screens of some models are covered by a thin film. Do not remove it.

CAUTION



The items supplied with your product may vary depending

upon the model.



Product specifications or contents of this manual may be

changed without prior notice due to upgrade of product

functions.



For an optimal connection, HDMI cables and USB devices

should have bezels less than 10 mm thick and 18 mm width.



Use an extension cable that supports USB 2.0 if the USB cable

or USB FLASH DRIVE does not fit into your TV’s USB port.



Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable,

the screen may not display or a connection error may occur.



Recommended HDMI cable types (3 m or less)

- High-Speed HDMI

cable

- High-Speed HDMI

cable with Ethernet

NOTE

*A 10 mm

*B 18 mm

ENG

ENGLISH

ASSEMBLING AND PREPARING

Magic Remote,

Batteries (AA)

(See page 40.)

Owner’s Manual

HDMI cable

(Depending upon

model)

(See pages 30 and 35.)

Video call camera

(Depending upon

model)

Cable Holder

(Depending upon

model)

(See page 26)

Power Cord

(Depending upon

model)

Cinema 3D

Glasses

The number of

3D glasses may

differ depending

upon the model or

country.

(Depending upon

model)

Dual play glasses

(Depending upon

model)

(For 49/55/60UB850T,

65UB930T, 65UB950T)

(For 65/79/84UB980T)

Composite Video

Cable

(See pages 33 and 34.)

Component Video

Cable

(See page 33.)

Stand Base, Stand

Body

(See page 17.)

Stand Base

(See page 18.)

(For 55/65UC970T) (For 79UG880T) (For 98UB980T) (For 49/55/60UB850T,

65UB930T, 65UB950T)

Stand Base, Stand

Body

(See page 20.)

Stand Base, Stand

Body

(See page 20.)

Stand Base

(See page 19.)

Stand Screws

8 EA, M4 x L20

(See page 17.)

ENGENGLISH

ASSEMBLING AND PREPARING

(For 65UB980T) (For 79/84UB980T) (For 55/65UC970T) (For 79UG880T)

Stand Screws

4 EA, M6 x L47

(See page 18.)

Stand Screws

4EA, M6 x L52

(See page 18.)

Stand Screws

4 EA, M4 x L10

4 EA, M4 x L20

(See page 20.)

Stand Screws

2 EA, M4 x L10

10 EA, M4 x L14

(See pages 20 and 21.)

(For 84UB980T) (For UB980T series) (For 49/55/60UB850T,

65UB930T, 65UB950T)

(For 55/65UC970T)

Insulation Holder

4 EA

(See page 18.)

Wrench

(See pages 18 and 19.)

Cable Management

2 EA

(See page 26.)

Cable Management

2 EA

(See page 26.)

(For 98UB980T) (For 98UB980T) (For 55/65UC970T,

79UG880T)

(For 98UB980T)

Cable Management

1 EA

(See page 26.)

Cable Management

1 EA

(See page 26.)

Wall Mount Inner

Spacers

4 EA

(See page 23.)

AV port cover/Screw

1 EA, M3 x L8

(See page 25.)

(For 105UC9T)

AV port cover

(See page 25.)

ENG

ENGLISH

ASSEMBLING AND PREPARING

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

These devices only work with certain models.

The model name or design may be changed manufacturer’s circumstances or policies.

AN-MR500

Magic Remote

AG-F***

Cinema 3D Glasses

AG-F***DP

Dual Play Glasses

AN-VC5**

Video Call Camera

LG Audio Device

Compatibility

49/55/60UB850T

65UB950T

55/65UC970T

79UG880T

65UB930T

65/79/84/98UB980T

105UC9T

AN-MR500

Magic Remote

• • •

AG-F***

Cinema 3D Glasses

• •

AG-F***DP

Dual Play Glasses

• •

AN-VC5**

Video Call Camera

• •

LG Audio Device

• • •

Remote Control Sensor

te Control Sensor

ENGENGLISH

ASSEMBLING AND PREPARING

(For 49/55/60UB850T) (For 65UB930T, 65UB950T)

Parts and Buttons

(For 65/79UB980T)

(For 84UB980T)

Joystick Button

Screen

Remote Control Sensor

Power Indicator

Intelligent Sensor

Speakers

Joystick Button

Remote Control Sensor

Power Indicator

Intelligent Sensor

Screen

Speakers

Remote Control Sensor

Joystick Button

Built in Camera

Speakers

(For 79UB980T)

Intelligent Sensor

LG Logo Light

Screen

LG Logo Light

Joystick Button

Remote Control Sensor

Intelligent Sensor

Built in Camera

Speakers

Screen

ENG

ENGLISH

ASSEMBLING AND PREPARING

1. Intelligent Sensor - Adjusts the image quality and brightness based on the surrounding environment.

2. Joystick Button is located behind the screen of TV.

3. Joystick Button is located below the screen of TV.

(For 55/65UC970T)

(For 105UC9T)

Joystick Button

Screen

Speakers

Remote Control Sensor

Intelligent Sensor

LG Logo Light

(For 79UG880T)

Joystick Button

Screen

Speakers

Remote Control Sensor

Intelligent Sensor

LG Logo Light

(For 98UB980T)

Joystick Button

Built in Camera

Screen

Remote Control Sensor

Intelligent Sensor

LG Logo Light

Sliding

Speaker



Do not place any objects or body parts in area between TV Screen and Speaker Stand

assembly. It could cause personal injury or damage to product. (For 105UC9T)

CAUTION

Screen

Joystick Button

Speakers

Built-in Camera

Remote Control Sensor

Intelligent Sensor

Power Indicator

ENGENGLISH

ASSEMBLING AND PREPARING



You can set the LG Logo Light or power indicator light to on or off by selecting

GENERAL

the main menu. (Depending upon model)

NOTE

Using the joystick button

You can operate the TV by pressing the button or moving the joystick left, right, up, or down.

Basic functions

Power On

When the TV is turned off, place your finger on the joystick button, press it

once and release it.

Power Off

When the TV is turned on, place your finger on the joystick button, press it

once for a few seconds and release it.

Volume Control

If you place your finger over the joystick button, move it left or right, you can

adjust the volume level.

Channels Control

If you place your finger over the joystick button, move it up or down, you can

scroll through the saved channels.

• With your finger over the joystick button, move it up, down, left, or right, be careful not to press

the joystick button. If you press the joystick button first, you may not be able to adjust the volume

level and/or scroll through saved channels.

NOTE

Adjusting the menu

When the TV is turned on, press the joystick button one time.

You can adjust the menu items ( , , ) moving the joystick button left or right.

TV OFF

Turns the power off.

Clears on-screen displays and returns to TV viewing.

INPUT

Changes the input source.

Built-in Camera

ENG

ENGLISH

ASSEMBLING AND PREPARING

Lifting and Moving the TV

When moving or lifting the TV, read the following

to prevent the TV from being scratched or

damaged and for safe transportation regardless

of its type and size.



Avoid touching the screen at all times, as

this may result in damage to the screen.



Do not place the product on the floor with

its front facing down without padding.

Failure to do so may result in damage to

the screen.

CAUTION



It is recommended to move the TV in the

box or packing material that the TV originally

came in.



Before moving or lifting the TV, disconnect

the power cord and all cables.



When holding the TV, the screen should

face away from you to avoid damage.



Hold the top and bottom of the TV frame

firmly. Make sure not to hold the transparent

part, speaker, or speaker grill area.



Use at least two people to move a

large TV.



When transporting the TV by hand,

hold the TV as shown in the following

illustration.



When handling the TV, be careful not to

damage the protruding joystick button.



When transporting the TV, do not expose

the TV to jolts or excessive vibration.



When transporting the TV, keep the TV

upright; never turn the TV on its side or tilt

towards the left or right.

Setting up the TV

You can mount your TV to a wall or attach

the stand if you wish to place the TV on an

entertainment center or other furniture.

Attaching the Stand

If you are not mounting the TV to a wall, use the

following instructions to attach the stand.



Remove the stand before installing the TV

on a wall mount by performing the stand

attachment in reverse.



Remove the protective film from the stand

base and then attach the stand body to

the stand base. (For UC970T series)

NOTE



When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect

the screen from scratches.



Make sure that the screws are fastened

tightly. (If they are not fastened securely

enough, the TV may tilt forward after

being installed.)



Do not tighten the screws with too much

force; otherwise they may be damaged

and come loose later.

CAUTION

ENGENGLISH

ASSEMBLING AND PREPARING

(For 49/55/60UB850T)

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

Attach the stand to the TV using the lower

connection on the back of the TV.

(For 49/55/60UB850T, 65UB930T,

65UB950T)

Stand Body (R)

Stand Base

4 EA

M4 x L20

Stand Body (L)

(For 65UB930T, 65UB950T)

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

Attach the stand to the TV using the lower

connection on the back of the TV.

4 EA

M4 x L20

ENG

ENGLISH

ASSEMBLING AND PREPARING

(For 65/79/84UB980T)

Stand Base



Make sure that the screws are inserted

correctly and fastened securely. (If they

are not fastened securely enough, the TV

may tilt forward after being installed.)

CAUTION

(For 79UB980T)

M6 x L52

4 EA

(For 65UB980T)

M6 x L47

4 EA

(For 65/79UB980T)

Wrench

(For 84UB980T)

M6 x L52

4 EA

(Insulation

Holder)

Wrench

ENGENGLISH

ASSEMBLING AND PREPARING

(For 98UB980T)

M6 x L47

6EA

Mold

Wrench



The stand screws are already attached

at the back of the TV. Please use these

attached screw to assemble the TV and

stand. (For 98UB980T)

NOTE

Stand Base

ENG

ENGLISH

ASSEMBLING AND PREPARING

Stand Base

Stand Body (L)

Stand Body (R)

M4 x L10

4 EA

When attaching the stand to the TV set,

make sure to put the protective packaging

that is included in the product box on a table

or flat surface and then place the TV screen

facing down on the protective packaging.

Attach the stand to the TV using the upper

mounting hole on the back of the TV.

Attach the stand to the TV using the lower

connection on the back of the TV.

(For 55/65UC970T)

(For 79UG880T)

Stand Body (L)

Stand Base

M4 x L10

2 EA

Stand Body (R)

M4 x L14

6 EA

M4 x L20

4 EA

Page is loading ...

LG 55UB850T Owner's manual

Brand: LG

Model: 55UB850T

Category: LCD TVs

Type: Owner's manual

This manual is also suitable for

Download PDF

report

in other languages

español: LG 55UB850T El manual del propietario

LG 55UB850T Owner's manual

This manual is also suitable for

LG 55UB850T Owner's manual

in other languages

Related papers

Other documents