Web Client Quick Guide
Once the NVR has been assigned an IP
address, the NVR is reachable through
Internet Explorer Version 6.0 and higher.
Microsoft Edge (Windows 10 browser) is
not supported. Internet explorer will
need to be ran as administrator.
ActiveX controls will need to be
installed when connecting to the Web
Client for the first time.
Default Login: admin
Default Password: admin
Once logged in, the Live View grid is
displayed (varies based on number of
channels). To enable all cameras
connected click on the icon. The
camera streams will start appearing.
This may take longer depending on the
number of channels. Note: Only the
channels with configured cameras will
be displayed.
Double click on stream to maximize.
Double click again to display the stream
full screen.
Right click on the stream brings up
multiple options: Disconnect, Drag, E-
Zoom, 3D Locate, Clear Alarm, Flip,
Snapshot and One-Key Focus.
Disconnect – Disable this camera stream
Drag – Left click and hold to resize the stream
window.
E-Zoom – Hold the left mouse button and select
the area where you would like to zoom in.
3D Locate (PTZ function) – Hold left mouse
button and drag towards lower right hand corner
to auto pan / tilt and zoom. Hold left mouse button
and drag towards upper left hand corner to auto
pan / tilt and zoom out. You can also click on an
area and the PTZ will move to that position.
Clear alarm – Clear current alarm count.
Flip – Flip current stream 180 degrees.
Snapshot – Take snapshot of current view
One-Key Focus (variable focal lens) – Auto focus
the stream with one click.