Datalogic Gryphon D432E Reference guide

Gryphon™ D432/D432E

Reference Manual

Gryphon™ D432/D432E

REFERENCE MANUAL

DATALOGIC S.p.A.

Via Candini 2

40012 - Lippo di Calderara di Reno

Bologna - Italy

Gryphon™ D432/D432E

Ed.: 06/2006

This manual refers to software version 1.01 and later.

Datalogic reserves the right to make modifications and improvements without prior notification.

Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or

consequential damages resulting from the use of this material.

Product names mentioned herein are for identification purposes only and may be trademarks and or

registered trademarks of their respective companies.

12/06/06

CONTENTS

GENERAL VIEW ......................................................................................... ix

COMPLIANCE.............................................................................................. x

FCC Compliance...........................................................................................xi

Laser Safety..................................................................................................xi

LED Illuminator .............................................................................................xi

Aiming System .............................................................................................xii

WEEE Compliance ......................................................................................xv

Power Supply...............................................................................................xv

PATENTS ................................................................................................... xv

WARRANTY............................................................................................... xv

SERVICES AND SUPPORT...................................................................... xvi

1 INTRODUCTION .......................................................................................... 1

1.1 Gryphon™ D432/D432E Description ............................................................ 1

1.2 Package Contents......................................................................................... 2

1.3 Configuration Methods.................................................................................. 2

1.3.1 Reading Configuration Codes....................................................................... 2

1.3.2 Using VisualSetup......................................................................................... 2

1.3.3 Sending Configuration Strings from Host...................................................... 2

2 USING GRYPHON™ D432/D432E .............................................................. 3

2.1 Aiming System .............................................................................................. 3

2.2 Normal Operation.......................................................................................... 4

2.3 Image Capturing ........................................................................................... 4

2.3.1 Basic Configuration Parameters ................................................................... 5

2.3.2 Advanced Configuration Parameters ............................................................ 6

2.4 Autoscanning ................................................................................................ 7

2.4.1 Normal Mode ................................................................................................ 7

2.4.2 Pattern Mode ................................................................................................ 7

2.4.3 Stand Autorecognition................................................................................... 8

2.5 Camera Control............................................................................................. 8

2.6 Defining Data Formatting .............................................................................. 9

2.6.1 Concatenation............................................................................................. 10

One Code Per Scan.................................................................................... 10

All Codes Per Scan..................................................................................... 10

3 INITIAL SETUP .......................................................................................... 11

3.1 RS232 Interface Selection .......................................................................... 11

3.2 Wedge Interface Selection .......................................................................... 12

iii

3.3 USB Interface Selection.............................................................................. 13

Start-Up....................................................................................................... 13

4 CONFIGURATION USING CODE SYMBOLS ........................................... 16

4.1 Default Settings........................................................................................... 17

4.2 Changing Default Settings .......................................................................... 22

RS232 INTERFACE ................................................................................... 23

Baud Rate................................................................................................... 23

Parity........................................................................................................... 24

Data Bits ..................................................................................................... 24

Stop Bits...................................................................................................... 24

ACK/NACK Protocol ................................................................................... 24

RX Timeout ................................................................................................. 25

Handshake.................................................................................................. 25

FIFO............................................................................................................ 25

Intercharacter Delay.................................................................................... 25

Intercode Delay........................................................................................... 25

USB ............................................................................................................ 26

USB COM Emulation .................................................................................. 26

Handshake.................................................................................................. 26

Ack/Nack Protocol....................................................................................... 26

FIFO............................................................................................................ 26

Intercharacter Delay.................................................................................... 27

Intercode Delay........................................................................................... 27

RX Timeout ................................................................................................. 27

USB Keyboard Emulation ........................................................................... 28

FIFO............................................................................................................ 28

Intercharacter Delay.................................................................................... 28

Intercode Delay........................................................................................... 28

Keyboard Nationality................................................................................... 29

Keyboard Speed ......................................................................................... 30

WEDGE INTERFACE................................................................................. 31

Caps Lock................................................................................................... 31

Caps Lock Auto-Recognition....................................................................... 31

Num Lock.................................................................................................... 31

Intercharacter Delay.................................................................................... 31

Intercode Delay........................................................................................... 32

Keyboard Nationality................................................................................... 32

Keyboard Setting ........................................................................................ 33

Extended Header/Terminator Keys............................................................. 36

Set Custom Extended Header/Terminator Keys ......................................... 37

iv

DATA FORMAT.......................................................................................... 40

Data Format Default.................................................................................... 40

Symbology Independent Parameters.......................................................... 40

Code Identifier............................................................................................. 40

Custom Code Identifier ............................................................................... 41

Code Length ............................................................................................... 41

Set Headers................................................................................................ 41

Headers ...................................................................................................... 42

Set Terminators .......................................................................................... 42

Terminators................................................................................................. 42

Symbology Dependent Parameters ............................................................ 43

Symbology Specific Format ........................................................................ 43

Symbology Headers.................................................................................... 43

Headers ...................................................................................................... 44

Symbology Terminators .............................................................................. 44

Terminators................................................................................................. 44

Symbology Character Substitution.............................................................. 45

Character Substitution ................................................................................ 45

Symbology Character Deletion ................................................................... 45

Character Deletion ...................................................................................... 46

Symbology Specific Format Default ............................................................ 46

Concatenation............................................................................................. 46

Define Concatenation ................................................................................. 46

Concatenation Enable/Disable.................................................................... 46

Concatenation Options ............................................................................... 47

First Concatenated Code Length ................................................................ 47

Second Concatenated Code Length........................................................... 47

Third Concatenated Code Length............................................................... 47

Fourth Concatenated Code Length............................................................. 47

Concatenation with Intercode Delay ........................................................... 48

Concatenation Failure Transmission........................................................... 48

Concatenation Timeout............................................................................... 48

Transmission After Timeout ........................................................................ 48

Concatenation Result Code ID.................................................................... 49

CAMERA CONTROL ................................................................................. 50

Exposure Mode........................................................................................... 50

Camera Calibration ..................................................................................... 50

CODE SELECTION .................................................................................... 51

Issue Identical Codes.................................................................................. 51

Linear Symbologies .................................................................................... 52

UPC/EAN/JAN Family................................................................................. 52

Code 39 Family........................................................................................... 52

Code 32 Family........................................................................................... 53

v

Interleaved 2 of 5 Family............................................................................. 54

Codabar Family........................................................................................... 55

Code 128 Family......................................................................................... 56

Code 93 Family........................................................................................... 57

RSS Family................................................................................................. 58

2D Symbologies.......................................................................................... 59

PDF417....................................................................................................... 59

Micro PDF417............................................................................................. 59

DataMatrix Family....................................................................................... 60

QR Family................................................................................................... 60

Postal Codes Family ................................................................................... 61

Maxicode Family......................................................................................... 62

Composite Codes ....................................................................................... 63

READING PARAMETERS ......................................................................... 64

Trigger Mode............................................................................................... 64

Trigger Type................................................................................................ 64

Flash Mode ................................................................................................. 64

Beeper Tone ............................................................................................... 65

Beeper Volume ........................................................................................... 65

Beeper Duration.......................................................................................... 65

Reads per Cycle ......................................................................................... 66

Scan Timeout.............................................................................................. 66

Aiming System Delay.................................................................................. 66

Good Read Spot ......................................................................................... 66

User Defined Beeper .................................................................................. 67

User Defined Beeper Tone ......................................................................... 67

User Defined Beeper Volume ..................................................................... 67

User Defined Beeper Duration .................................................................... 68

Test User Defined Beeper........................................................................... 68

Code Ordering and Selection...................................................................... 69

Codes per Scan .......................................................................................... 69

Central Code Transmission......................................................................... 69

Order By Code Length ................................................................................ 69

Order By Code Symbology ......................................................................... 70

Autoscan..................................................................................................... 70

Autoscan Mode ........................................................................................... 70

Autoscan Aiming System ............................................................................ 70

Autoscan Hardware Trigger ........................................................................ 71

Autoscan Illumination System ..................................................................... 71

Safety Time................................................................................................. 71

Safety Time Duration .................................................................................. 71

Stand Autoscan Mode................................................................................. 72

CAPTURE IMAGE...................................................................................... 73

vi

ADVANCED IMAGE CAPTURE................................................................. 74

Image Preset 1............................................................................................ 74

Image Format – preset 1............................................................................. 74

Resolution – preset 1 .................................................................................. 74

JPEG Quality Factor – preset 1 .................................................................. 75

Window Dimensions – preset 1................................................................... 75

Brightness – preset 1 .................................................................................. 76

Contrast – preset 1 ..................................................................................... 76

Zoom – preset 1.......................................................................................... 77

Color Depth – preset 1................................................................................ 78

Image Preset 2............................................................................................ 79

Image Format – preset 2............................................................................. 79

Resolution – preset 2 .................................................................................. 79

JPEG Quality Factor – preset 2 .................................................................. 79

Window Dimensions – preset 2................................................................... 80

Brightness – preset 2 .................................................................................. 81

Contrast – preset 2 ..................................................................................... 81

Zoom – preset 2.......................................................................................... 82

Color Depth – preset 2................................................................................ 83

Image Preset 3............................................................................................ 84

Image Format – preset 3............................................................................. 84

Resolution – preset 3 .................................................................................. 84

JPEG Quality Factor – preset 3 .................................................................. 84

Window Dimensions – preset 3................................................................... 85

Brightness – preset 3 .................................................................................. 86

Contrast – preset 3 ..................................................................................... 86

Zoom – preset 3.......................................................................................... 87

Color Depth – preset 3................................................................................ 88

Image Preset 4............................................................................................ 89

Image Format – preset 4............................................................................. 89

Resolution – preset 4 .................................................................................. 89

JPEG Quality Factor – preset 4 .................................................................. 89

Window Dimensions – preset 4................................................................... 90

Brightness – preset 4 .................................................................................. 91

Contrast – preset 4 ..................................................................................... 91

Zoom – preset 4.......................................................................................... 92

Color Depth – preset 4................................................................................ 93

4.3 Advanced Data Format ............................................................................... 94

4.3.1 Format Definition......................................................................................... 95

Method 1 - Extracting Information from Barcode......................................... 96

Method 2 - Manipulating the Barcode Data............................................... 101

4.3.2 Match Conditions ...................................................................................... 112

4.3.3 Format Enable/Disable ............................................................................. 114

4.3.4 Mismatch Result ....................................................................................... 115

vii

5 REFERENCES ......................................................................................... 116

5.1 RS232 – USB COM .................................................................................. 116

5.1.1 ACK/NACK Protocol ................................................................................. 116

5.1.2 RX Timeout ............................................................................................... 116

5.2 USB Keyboard .......................................................................................... 117

5.2.1 Keyboard Speed ....................................................................................... 117

5.3 Code Selection.......................................................................................... 117

5.3.1 Issue Identical Codes................................................................................ 117

5.4 Reading Parameters ................................................................................. 117

5.4.1 Safety Time............................................................................................... 117

5.5 Configuration Editing Commands ............................................................. 118

6 TEST CODE SYMBOLS........................................................................... 119

7 MAINTENANCE ....................................................................................... 121

8 TECHNICAL FEATURES......................................................................... 122

8.1 Indicators .................................................................................................. 125

8.1.1 Gryphon™ D432/D432E LED Indicators................................................... 125

8.1.2 Beeper ...................................................................................................... 125

8.1.3 Good Read Spot ....................................................................................... 125

A HOST CONFIGURATION STRINGS........................................................ 126

B PROGRAMMING FOR EXPERT USERS................................................. 139

Function Description ................................................................................. 139

C CODE IDENTIFIER TABLE...................................................................... 144

D HEX AND NUMERIC TABLE ................................................................... 146

viii

GENERAL VIEW

Gryphon™ D432/D432E

Green LED

Figure A

ix

COMPLIANCE

Figure B - Gryphon™ D432/D432E Reader Product Labels

Aiming System Laser

Beam Output Window

x

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written approval of

Datalogic could void the authority to use this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference which may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

LASER SAFETY

The Gryphon™ D432/D432E hand-held reader is a Class 1 LED product regarding

its Illuminator and a Class 2 laser product regarding its Aiming System.

LED Illuminator

The use of an illuminator in the Gryphon™ D432/D432E hand-held reader is a Class

1 LED product:

ILLUMINATORE LED CLASSE 1

AUSLEUCHTER LED KLASSE 1

ILLUMINATEUR A LED DE CLASSE 1

ILUMINADOR LED DE CLASE 1

xi

Aiming System

The Gryphon™ D432/D432E aiming system meets the requirements for laser safety.

AVOID EXPOSURE LASER LIGHT IS EMITTED FROM THIS APERTURE

CAUTION-CLASS 2 LASER LIGHT WHEN OPEN

LASER LIGHT - DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

MAX. OUTPUT RADIATION 0.25 mW - EMITTED WAVELENGTH 640~660 nm

TO EN 60825-1:2001

LASERSTRAHLUNG – NICHT IN DEN STRAHL BLICKEN

LASER KLASSE 2

MAX. AUSGANGSLEISTUNG 0.25 mW - WELLENLÄNGE 640~660 nm

TO EN 60825-1:2001

DO NOT STARE

INTO BEAM

This product complies with

21 CFR Subchapter J

I D F E

LA LUCE LASER È

VISIBILE ALL'OCCHIO

UMANO E VIENE

EMESSA DALLA

FINESTRA INDICATA

NELLA FIGURA.

DIE LASER-

STRAHLUNG IST FÜR

DAS MENSCHLICHE

AUGE SICHTBAR UND

WIRD AM STRAHLAUS-

TRITTSFENSTER

AUSGESENDET

(SIEHE BILD)

LE RAYON LASER EST

VISIBLE À L'OEIL NU

ET IL EST ÉMIS PAR

LA FENÊTRE

DÉSIGNÉE SUR

L'ILLUSTRATION DANS

LA FIGURE

A LUZ LÁSER ES

VISIBLE AL OJO

HUMANO Y ES

EMITIDA POR LA

VENTANA INDICADA

EN LA FIGURA.

LUCE LASER NON

FISSARE IL FASCIO

APPARECCHIO LASER

DI CLASSE 2 MASSIMA

POTENZA D'USCITA:

LUNGHEZZA D'ONDA

EMESSA:

CONFORME A EN

60825-1 (2001)

LASERSTRAHLUNG

NICHT IN DEN STRAHL

BLICKEN PRODUKT

DER LASERKLASSE 2

MAXIMALE

AUSGANGSLEISTUNG:

WELLENLÄGE:

ENTSPR. EN 60825-1

(2001)

RAYON LASER EVITER

DE REGARDER LE

RAYON APPAREIL

LASER DE CLASSE 2

PUISSANCE DE

SORTIE:

LONGUEUR D'ONDE

EMISE:

CONFORME A EN

60825-1 (2001)

RAYO LÁSER NO

MIRAR FIJO EL RAYO

APARATO LÁSER DE

CLASE 2 MÁXIMA

POTENCIA DE SALIDA:

LONGITUD DE ONDA

EMITIDA:

CONFORME A EN

60825-1 (2001)

ENGLISH

The following information is provided to comply with the rules imposed by

international authorities and refers to the correct use of your terminal.

STANDARD LASER SAFETY REGULATIONS

This product conforms to the applicable requirements of both CDRH 21 CFR 1040

and EN 60825-1 at the date of manufacture.

For installation, use and maintenance, it is not necessary to open the device.

WARNING

Use of controls or adjustments or performance of procedures other

than those specified herein may result in exposure to hazardous

visible laser light.

xii

The product utilizes a low-power laser diode. Although staring directly at the laser beam

momentarily causes no known biological damage, avoid staring at the beam as one

would with any very strong light source, such as the sun. Avoid that the laser beam hits

the eye of an observer, even through reflective surfaces such as mirrors, etc.

ITALIANO

Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e

si riferiscono all’uso corretto del terminale.

NORMATIVE STANDARD PER LA SICUREZZA LASER

Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data

di produzione: CDRH 21 CFR 1040 e EN 60825-1.

Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo

o manutenzione.

ATTENZIONE

L'utilizzo di procedure o regolazioni differenti da quelle descritte

nella documentazione può provocare un'esposizione pericolosa

a luce laser visibile.

Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni

riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di

fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità

intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un

osservatore, anche attraverso superfici riflettenti come gli specchi.

DEUTSCH

Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von

internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten

Gebrauch vom Terminal.

NORM FÜR DIE LASERSICHERHEIT

Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH

21 CFR 1040 Normen für die Lasersicherheit.

Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-

Arbeiten zu öffnen.

Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht

in dieser Betriebsanleitung beschreiben werden, können ein

gefährliches Laserlicht verursachen.

ACHTUNG

Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von

kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den

xiii

Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).

Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch

egen reflektierende Oberflächen zu richten.

par les autorités

ternationales et se réfèrent à une correcte utilisation du terminal.

ité laser en vigueur à sa date de

n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.

g

FRANÇAIS

Les informations suivantes sont fournies selon les règles fixées

in

NORMES DE SECURITE LASER

Ce produit est conforme aux normes de sécur

fabrication: CDRH 21 CFR 1040 et EN 60825-1.

Il

ATTENTION

entraîner une dangereuse exposition à lumière laser

visible.

L'utilisation de procédures ou réglages différents de ceux donnés

ici peut

Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été

constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le

rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi

de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces

fléchissantes (miroirs, par exemple).

siciones

e las autoridades internacionales y se refieren al uso correcto del terminal.

s de seguridad láser a la

o es necesario abrir el aparato para la instalación, la utilización o la manutención.

ré

ESPAÑOL

Las informaciones siguientes son presentadas en conformidad con las dispo

d

NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER

Este aparato resulta conforme a las normativas vigente

fecha de producción: CDRH 21 CFR 1040 y EN 60825-1.

N

ATENCIÓN

exposición peligrosa a la luz láser visible.

La utilización de procedimientos o regulaciones diferentes de

aquellas describidas en la documentación puede causar una

El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos

humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el

rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por

ejemplo el so

observador, ta

l. Además, eviten de dirigir el rayo láser hacia los ojos de un

mbién a través de superficies reflectantes como los espejos.

xiv

CAUTION

damage and w

The Gryphon™ D432/D432E Hand-Held Reader is not user-

serviceable. Opening the case of the unit can cause internal

ill void the warranty.

EEE COMPLIANCE W

POWER SUPPLY

This device is intended to be connected to a UL Listed/CSA Certified computer which

irectly to the reader or else be supplied by a UL Listed/CSA Certified

ed "Class 2" or LPS power source rated 5 V, minimum 330 mA,

er directly to the reader via the power connector of the cable.

ATENTS

supplies power d

Power Unit mark

hich supplies poww

P

This product is covered by one or more of the following patents:

.S. patents: 6,512,218 B1; 6,808,114 B1; 6,877,664 B1 and 6,478,226 B2.

28,315 B1.

nding.

U

European patent: 1,1

dditional patents peA

WARRANTY

Datalogic warranties this product against defects in workmanship and materials, for a

eriod of 5 years from the date of shipment, provided p that the product is operated

duct; these provisions do not

prolong the original warranty term.

The warranty does not apply to any product that has been subject to misuse,

accidental damage, unauthorized repair or tampering.

under normal and proper conditions.

Datalogic has the faculty to repair or replace the pro

xv

SERVICES AND SUPPORT

Datalogic provides several services as well as technical support through its website.

Log on to www.datalogic.com and click on the

links indicated for further information

including:

•

PRODUCTS

Search through the links to arrive at your product page where you can download

specific

Manuals and Software & Utilities including:

- VisualSetup a Windows-based utility program allowing device configuration

using a PC. It provides RS232 interface configuration as well as configuration

barcode printing.

•

SERVICES & SUPPORT

-

Datalogic Services - Warranty Extensions and Maintenance Agreements

-

Authorised Repair Centres

•

CONTACT US

E-mail form and listing of Datalogic Subsidiaries

xvi

INTRODUCTION

1

1 INTRODUCTION

1.1 GRYPHON™ D432/D432E DESCRIPTION

The Gryphon™ D432/D432E reader is an omni-directional barcode scanner having

the following characteristics:

Plug and Play

The Gryphon™ D432/D432E is very ergonomic and user-

friendly for intuitive operation and is equipped with plug-and-

play enhanced Multistandard Architecture. It can be connected

to a Host PC through a USB, RS232 or Wedge emulation cable.

Omni-directional

Operating

To read a symbol or capture an image, you simply aim the

reader and pull the trigger. Since Gryphon™ D432/D432E is a

powerful omni-directional reader, the orientation of the symbol

is not important.

Decoding

Thanks to powerful algorithms, Gryphon™ D432/D432E reliably

decodes all major 1D (linear) barcodes, 2D stacked codes (such

as PDF417), 2D matrix symbols (such as DataMatrix), postal

codes (such as POSTNET, PLANET). The data stream —

acquired from decoding a symbol — is rapidly sent to the host.

The reader is immediately available to read another symbol.

Formatting and

Concatenating

The string of a decoded code may be processed according to

either a simple or advanced data formatting and be concatenated

to other codes (up to 4 different codes).

Imaging

Gryphon™ D432/D432E can also function as a camera by

capturing entire images or image portions of labels, signatures,

and other items. Two different control modes are available for

managing the camera exposure and calibration.

Autoscanning

An autoscan command causes the reader to scan continuously

and to monitor the central zone of its reading area.

Flash Memory

Flash technology allows to upgrade the Gryphon™

D432/D432E reader as new symbologies are supported or as

improved decoding algorithms become available.

1

GRYPHON™ D432/D432E

1

1.2 PACKAGE CONTENTS

The following parts are included in the Gryphon™ D432/D432E package contents:

• Gryphon™ D432/D432E Hand-Held Reader

• Gryphon™ D432/D432E Quick Reference Manual

You may want to save your packing material in case you need to ship the reader at

some later time.

1.3 CONFIGURATION METHODS

1.3.1 Reading Configuration Codes

This m\anual can be used for complete setup and configuration. If you wish to

change the default settings, you can configure the Gryphon™ D432/D432E reader by

reading the programming code symbols in this manual. Configuration commands and

their relative arguments are read individually using the symbols in this manual. See

Appendix D.

1.3.2 Using VisualSetup

The Datalogic VisualSetup program, available on the website, allows programming

the reader by selecting configuration commands or printing them through a user-

friendly graphical interface running on the PC. These commands are sent to the

reader over the current communication interface; or they can be printed to be read.

1.3.3 Sending Configuration Strings from Host

An alternative configuration method is provided in Appendix A using the RS232 or

USB COM interface. This method is particularly useful when many devices need to

be configured with the same settings. Batch files containing the desired parameter

settings can be prepared to configure devices quickly and easily.

2

Page is loading ...

Datalogic Gryphon D432E Reference guide

This manual is also suitable for

Datalogic Gryphon D432E Reference guide

Related papers

Other documents