1
2
3
4
1
2
3
Product Safety Guide
Telephone Line Cord
For MFC models
Set the date and time
Press >
Date
Press 1. Date.
Enter the last two digits of the year using the numbers on the Touchscreen, and then press 2. OK.
Enter the two digits for the month using the Touchscreen, and then press 3. OK.
Enter the two digits for the day using the Touchscreen, and then press 4. OK.
Clock Type
Press 1. Clock Type.
Press 2. 12h Clock or 24h Clock.
Time
Press 1. Time.
Enter the two digits for the time using the Touchscreen. 2.
(12h Clock only)
Press
to select AM or PM.
Press 3. OK.
Press 4.
.
Connect the telephone line cord
NOTE:
To congure the machine for faxing, see the • Basic User's Guide.
Your machine is programmed to automatically receive faxes.•
To change this default mode, see the Basic User's Guide.
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord
Quick Setup Guide
Basic User’s Guide
For MFC models
CD-ROM
Belt Unit
(pre-installed)
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The components included in the box and the AC power plug •
connection may differ depending on your country.
The illustrations in this Quick Setup Guide are based on the •
MFC-L8850CDW.
You must purchase the correct interface cable for the interface you •
want to use:
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 6 feet (2 meters) long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
Press
1.
> All Settings > Initial Setup >
Local Language
Press your language.
2.
Press
3.
.
1
Remove the packing material from the machine
2
Load paper in the paper tray
3 4
Connect the power cord and turn on
the machine
Select your language
5
Congure the machine for faxing (for MFC models)
If you do not plan to use the fax feature on this machine, go to step 6.
Adjust the paper guides.
Quick Setup Guide
DCP-L8400CDN / MFC-L8600CDW
MFC-L8850CDW / MFC-L9550CDW
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/.
Not all models are available in all countries.
Version 0
USA/CAN
Finish
Wireless Network Connection
Finish
[Recommended]
Temporarily use a USB cable
for easy setup.
Conguration using the CD-ROM (Windows
®
)
Conguration without using the CD-ROM (Windows
®
without CD-ROM drive or Macintosh)
6
Follow the on-screen instructions until
the Connection Type screen appears.
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
Finish
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
[Option]
Select if you do not have a USB cable.
Download the full driver and software package from the Brother Solutions Center.
(For Windows
®
) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
Print from your mobile devices using our free application “Brother iPrint&Scan”.
Connect the machine and wireless LAN access point/router from the machine's Touchscreen.
1.
Download “Brother iPrint&Scan" to start using your machine with mobile devices.
2.
solutions.brother.com/ips
Print using your mobile device
Press .
For USB Connection
For Wired Network Connection
Connect a network cable rst.
For Wireless Network Connection
Select the specied SSID,
and then enter the Network key.
Press Setup Wizard. Press Yes to enable WLAN.
-
1
-
2
Brother MFC-L8600CDW Quick setup guide
- Type
- Quick setup guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Brother MFC-L9550CDW User manual
-
-
Brother DCPL5600DN User guide
-
Brother HL-L2380DW Installation guide
-
-
Brother MFC-L5705DW Quick setup guide
-
Brother MFC-L6750DW Quick setup guide
-
-
-
Brother DCP-L2520DW Quick setup guide