Instruction Manual
Soundbar
L37S13
L37S13_IB_RC_Final130628.indd 1 28/06/2013 3:13 PM
2
Contents
Unpacking ...................................................................................................................................... 5
Product Overview .......................................................................................................................... 6
Front View ..................................................................................................................................................................6
Top View ..................................................................................................................................................................... 6
Bottom View ............................................................................................................................................................. 6
Side View .................................................................................................................................................................... 7
Remote Control .............................................................................................................................. 7
Battery Replacement for the Remote Control ............................................................................. 8
Remote Control Operation Range ................................................................................................ 9
Wall Mounting ...............................................................................................................................9
Connections .................................................................................................................................11
Using the OPTICAL Connection ....................................................................................................................... 11
Using the AUX IN Connection ..........................................................................................................................11
Using the LINE IN Connection ..........................................................................................................................12
Using the COAXIAL Connection ......................................................................................................................12
Connecting to the Mains Supply.....................................................................................................................13
Using the SUB-WOOFER OUT Connection (Optional) .............................................................................13
Selecting Modes ....................................................................................................................................................14
Adjusting the Volume..........................................................................................................................................14
EQ (Equaliser) .........................................................................................................................................................14
Adjusting the Bass Level.....................................................................................................................................14
Adjusting the Treble Level .................................................................................................................................14
Maintenance ................................................................................................................................15
Hints and Tips ..............................................................................................................................15
Specications ...............................................................................................................................15
L37S13_IB_RC_Final130628.indd 2 28/06/2013 3:13 PM
3
• Read all the instructions carefully before
using the unit and keep them for future
reference.
• Retain the manual. If you pass the unit
onto a third party make sure to include this
manual.
• Check that the voltage marked on the
rating label matches your mains voltage.
Damage
• Please inspect the unit for damage after
unpacking.
• Do not continue to operate the unit if you
are in any doubt about it working normally,
or if it is damaged in any way - switch o,
withdraw the mains plug and consult your
dealer.
Location of Unit
• The unit must be placed on a at stable
surface and should not be subjected to
vibrations.
• Do not place the unit on sloped or unstable
surfaces as the unit may fall o or tip over.
• The mains socket must be located near the
unit and should be easily accessible.
• This unit is designed for indoor use only.
Temperature
• Avoid extreme degrees of temperature,
either hot or cold. Place the unit well away
from heat sources such as radiators or gas/
electric res.
• Avoid exposure to direct sunlight and other
sources of heat.
Naked Flames
• Never place any type of candle or naked
ame on the top of or near the unit.
Ventilation
• To prevent the risk of electric shock or
re hazard due to overheating, ensure
that curtains and other materials do not
obstruct the ventilation vents.
• A minimum distance of 5cm around the
unit should be maintained to allow for
sucient ventilation.
• Do not install or place this unit in a
bookcase, built-in cabinet or in another
conned space. Ensure the unit is well
ventilated.
Safety Warnings
Safety
• Always disconnect the unit from the mains
supply before connecting/ disconnecting
other devices or moving the unit.
• Unplug the unit from the mains socket
during a lightning storm.
Mains Cable
• Make sure the unit or unit stand is not
resting on top of the mains cable, as the
weight of the unit may damage the mains
cable and create a safety hazard.
• If the mains cable is damaged it must be
replaced by the manufacturer, its service
agent, or similarly qualied persons in order
to avoid a hazard.
Interference
• Do not place the unit on or near appliances
which may cause electromagnetic
interference. If you do, it may adversely
aect the working of the unit, and cause a
distorted sound.
Batteries
• Batteries used in the unit are easily
swallowed by young children and this is
dangerous.
• Keep loose batteries away from young
children and make sure that the battery
holder tray is secure in the unit. Seek
medical advice if you believe a cell has been
swallowed.
• Please dispose of batteries correctly by
following the guidance in this manual.
• Do not expose the battery to direct sunlight
or sources of excessive heat.
Supervision
• Children should be supervised to ensure
that they do not play with the unit.
• Never let anyone especially children push
anything into the holes, slots or any other
openings in the case - this could result in a
fatal electric shock.
L37S13_IB_RC_Final130628.indd 3 28/06/2013 3:13 PM
4
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning ash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the unit’s enclosure that
may be of sucient magnitude to
constitute a risk of electric shock.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the manual
accompanying the unit.
Service
• To reduce the risk of electric shock, do not
remove screws. The unit does not contain
any user-serviceable parts. Please leave all
maintenance work to qualied personnel.
• Do not open any xed covers as this may
expose dangerous voltages.
Maintenance
• Ensure to unplug the unit from the power
supply before cleaning.
• Do not use any type of abrasive pad or
abrasive cleaning solutions as these may
damage the unit’s surface.
• Do not use liquids to clean the unit.
L37S13_IB_RC_Final130628.indd 4 28/06/2013 3:13 PM
5
Unpacking
Remove all items from the packaging. Retain the packaging. If you dispose of it please do so
according to local regulations.
The following items are included:
Thank you for purchasing your new Logik Soundbar.
We recommend that you spend some time reading this instruction manual in order
that you fully understand all the operational features it oers. You will also nd some
hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual
for future reference.
Remote Control
Phono (RCA) Audio Adapter Coaxial Cable
Main Unit
Mounting Kits
Instruction Manual
SOURCE
MUTE
EQ
TREBLE
BASS
Vol
Vol
If items are missing, or damaged please contact Partmaster (UK only).
Tel: 0844 800 3456 for assistance.
L37S13_IB_RC_Final130628.indd 5 28/06/2013 3:13 PM
6
9
12
VOL– VOL+ EQFUNCTIONSTANDBY
Product Overview
Front View
Bottom View
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
Top View
1. Speakers
2. Remote Control Sensor
3. Display
4. Status Indicator
7. VOL +/– Buttons
Adjust the volume.
8. EQ Button
Selects the preset equalisers.
3 421 1
5 6 7 8
5. STANDBY Button
Switches the unit between ON and
STANDBY modes.
6. SOURCE Button
Selects the input source.
11 13
10
9. OPTICAL Socket
10. AUX IN (L/R) Sockets
11. COAXIAL Socket
12. SUB-WOOFER OUT Socket
13. Mains Cable
L37S13_IB_RC_Final130628.indd 6 28/06/2013 3:13 PM
7
7
1
6
2
3
4
5
Remote Control
1. Button
Switches the unit between ON and
STANDBY modes.
2. MUTE Button
Silences the unit or restores the sound.
3. BASS Button
Adjusts the bass level of the audio
output.
4. EQ Button
Selects the preset equalisers.
5. TREBLE Button
Adjusts the treble level of the audio
output.
6. SOURCE Button
Selects the input source.
7. VOL +/– Buttons
Adjust the volume.
SOURCE
MUTE
EQ
TREBLE
BASS
Vol
Vol
1
Side View
1. LINE IN Socket
LINE IN
L37S13_IB_RC_Final130628.indd 7 28/06/2013 3:13 PM
8
Battery Replacement for the Remote Control
1. Press and slide the battery cover to open the
battery compartment of the remote control.
2. Insert one AAA size battery (not included).
Ensure the polarities (+ and –) of the battery
match the (+) and (–) as indicated in the
battery compartment.
Handling the Battery
• Improper or incorrect use of batteries may cause corrosion or battery leakage,
which could cause re, personal injury or damage to property.
• Install the battery correctly in the battery compartment.
• When the battery is exhausted, the remote control will not function.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in
accordance with local regulations.
Handling the Remote Control
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of
excessive heat.
• Remove the battery from the remote control when not in use for a long period
of time, as corrosion or battery leakage may occur and result in physical injury,
and/or property damage, and/or re.
3. Close the battery compartment cover.
L37S13_IB_RC_Final130628.indd 8 28/06/2013 3:13 PM
9
Remote Control Operation Range
• The remote control sensor at the front unit is
sensitive to the remote control’s commands up
to a maximum of 8 metres away and within a
maximum of a 30° arc.
• Please note that the operating distance may
vary depending on the brightness of the room.
Wall Mounting
Use an electronic stud nder to check the wall type before drilling and mounting.
SOURCE
MUTE
EQ
TREBLE
BASS
Vol
Vol
15° 15°
Max. 8 m
ø8mm
50mm
ø3mm
30mm
1. Drill 2 parallel holes (Ø 3-8 mm each according to wall type) in the wall. The distance
between the holes should be 401 mm.
401 mm
Wall (Front view)
Electronic stud nder
(not included)
Solid wall
Drywall, Plaster wall,
Lath wall, etc.
Drill
(not included)
L37S13_IB_RC_Final130628.indd 9 28/06/2013 3:13 PM
10
2. Firmly x 1 dowel into each hole in the wall.
Dowel
Solid wall (i.e., Solid brick,
Solid concrete, Solid wood,
Solid wooden battens)
Drywall, Plaster wall,
Lath wall, etc.
Screw
5 mm
Dowel
Wall
(Side view)
3. Insert 1 screw into each dowel. Be sure to leave a 5 mm gap between the wall and the
screw’s head.
4. Stick the 2 cushion pads at the back of the main unit.
5. Lift the main unit over the heads of the screws and slot the mounting hold into place.
Main unit
(Side view)
Screw
Dowel
Wall
(Side view)
Mounting
hold
Cushion
Pads
L37S13_IB_RC_Final130628.indd 10 28/06/2013 3:13 PM
11
Connections
Using the OPTICAL Connection
1. Use an optical cable (not included) to connect the audio device’s OPTICAL OUT socket
to the unit’s OPTICAL (input) socket.
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
OPTICAL cable
(not included)
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
Using the AUX IN Connection
Use the RCA audio cable to connect the audio device’s audio output sockets to unit’s
AUX IN (L/R) socket.
Phono (RCA)
Audio Adapter
Audio device
Audio device
Bottom view of the unit
Bottom view of the unit
red
red
white
Right
Left
white
L37S13_IB_RC_Final130628.indd 11 28/06/2013 3:13 PM
12
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
LINE IN
Using the LINE IN Connection
Use a 3.5mm to 3.5mm stereo audio cable (not included) to connect the audio device’s
audio output socket to the unit’s LINE IN socket.
3.5mm to 3.5mm
stereo audio cable
(not included)
Coaxial Cable
Using the COAXIAL Connection
Use the coaxial cable to connect the audio device’s coaxial output socket to the unit’s
COAXIAL (input) socket.
Audio device
Audio device
Bottom view of the unit
Side view of the unit
L37S13_IB_RC_Final130628.indd 12 28/06/2013 3:13 PM
13
Connecting to the Mains Supply
• This unit is designed to operate with the provided mains cable.
• Connecting the unit to any other power source may damage the unit. Unwind the
mains cable to its full length. Connect the mains plug to the mains socket. Make sure
the mains plug is rmly inserted into the mains socket. The unit is now connected and
ready to use.
• To switch the unit o completely, unplug the mains plug from the mains socket.
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
Bottom view of the unit
To the mains
socket
To the mains
socket
Ensure all audio connections of the unit are connected
before connecting to the mains power socket.
The unit and the external sub-woofer is powered individually.
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
R
AUX IN
COAXIAL
SUB-WOOFER
OUT
OPTICAL
L
TO MAIN SET
Using the SUB-WOOFER OUT Connection (Optional)
This unit supports an external sub-woofer and is sold separately. It is recommended that
the external sub-woofer has an output power of at least 50W.
Connect the sub-woofer’s cable to the unit’s SUB-WOOFER OUT socket. Plug the other end
of the cable to the mains socket.
Sub-woofer
(not included)
Bottom view of the unit
L37S13_IB_RC_Final130628.indd 13 28/06/2013 3:13 PM
14
General Operation
When you rst connect the unit to the mains socket, the unit will be in STANDBY mode.
The status indicator will light up red.
• Press
STANDBY to switch the unit on. The word “HELLO“ will show on the display, and
the status indicator will light up green.
• Press
STANDBY to switch the unit back to STANDBY mode. The status indicator will
light up red.
• Disconnect the mains plug from the mains socket if you want to switch the unit o
completely.
When the unit volume is close to mute or is idle for approximately 10 minutes,
it will automatically switch to Standby.
Selecting Modes
Press SOURCE repeatedly to switch between AUX IN, OPTICAL, COAXIAL and LINE IN
modes.
Adjusting the Volume
• Press VOL +/– to adjust the volume.
• If you wish to turn the sound o, press MUTE on the remote control. Press MUTE again
or press VOL +/– to resume normal listening.
EQ (Equaliser)
Press EQ on the remote control to switch between preset equalisers to suit individual
preference.
Cycle through the preset equalisers to select the preferred sound ambience. Standard
settings are Flat / Rock / Pop / Classic.
Adjusting the Bass Level
Press BASS, then press VOL +/- to adjust the bass level.
Adjusting the Treble Level
Press TREBLE, then press VOL +/- to adjust the treble level.
L37S13_IB_RC_Final130628.indd 14 28/06/2013 3:13 PM
15
Maintenance
Ensure the unit is fully unplugged from the mains socket before cleaning.
• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.
Hints and Tips
If a problem occurs, it may often be due to something very minor. The following table
contains various tips.
Problem Solution
No power. • Ensure the mains cable is connected securely.
• Make sure that the ON mode is selected.
Loud hum or noise is
heard.
• The plugs and sockets are dirty. Wipe them with a cloth slightly
moistened with an appropriate non-abrasive cleaning solution.
The remote control
does not function.
• Use the remote control near the unit.
• Point the remote control at the remote control sensor on the
unit.
• Replace the battery in the remote control with a new one.
• Remove any obstacles between the remote control and the
• unit.
The unit does not
respond when
pressing any buttons.
The unit may freeze up during use. Switch the unit off and then
on again at the mains socket to reset the unit.
If any functional abnormality is encountered, unplug the unit from the mains
socket and reconnect it again.
Specications
Model L37S13
Mains Supply AC 110-240V ~50/60Hz
Power Consumption 48W
Speaker Output Power 20W x 2
Net Weight 3.4kg
Dimension 820mm (W) x 86mm (D) x 100mm (H)
Features and specications are subject to change without prior notice.
L37S13_IB_RC_Final130628.indd 15 28/06/2013 3:13 PM
DSG Retail Ltd. (co. no. 504877)
Maylands Avenue, Hemel Hempstead, Herts., HP2 7TG, UK
IB-L37S13-130628V3
All trademarks are the property of their respective owners and all rights are acknowledged.
This symbol on the product or in the instructions means that your electrical and
electronic equipment should be disposed at the end of its life separately from your
household waste. There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
purchased the product.
Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to the environment. To
preserve our environment, dispose of used batteries according to your local laws or regulations.
Do not dispose of batteries with normal household waste.
For more information, please contact the local authority or your retailer where you purchased the
product.
For general information about this appliance
and handy hints and tips, please visit
www.knowhow.com/knowledgebank or call 0844 5611234.
In the unlikely event of a problem developing, please contact the store where you purchased
your equipment.
We continually strive to improve our products; specications may change without prior notice.
For advice on where to purchase accessories, please contact the store where you purchased your
equipment.
Visit Partmaster.co.uk today for the easiest way to buy electrical
spares and accessories. With over 1 million spares and accessories
available we can deliver direct to your door the very next day. Visit
www.partmaster.co.uk or call 0844 800 3456 (UK customers only) Calls charged at National Rate.
L37S13_IB_RC_Final130628.indd 16 28/06/2013 3:13 PM
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
