Halo BOLT 57720 Quick start guide

*Fully charge your HALO Bolt before ﬁrst use.

Jump Starng Your Vehicle with the HALO BOLT 57720

1. Plug the jumper cables into your HALO BOLT and aach

jumper cable clamps to car baery.

- Red clamp on posive terminal (+)

- Black clamp on negave terminal (-)

2. Press the “Jump Start” buon and wait for solid green light.

- Pulsing green light indicates safety checks in progress.

- Solid green light indicates ready to start your vehicle.

3. Start your vehicle.

4. Disconnect jumper cable clamps from car baery.

Charging Your Electronic Devices

1. Connect compable electronic devices to the USB ports to

begin charging.

2. Press the ON/OFF power buon.

Using the LED Floodlight

Press the ON/OFF LED Floodlight buon.

QUICK START GUIDE

To contact us, email us at

or call 888-907-6274

www.BESTHALO.com