14
Preparing and using the SCUBAJET
1 Make sure the battery is fully charged. 2 Beawarethatthesuctioneectonthewater
intake may torque loose body parts or loose
items of yourself and people around. If you
have longer hair, use a swimming cap or tie
hair back and out of the way.
3 Do not dive below 3 meters (10 ft) depth if
you are not scuba trained.
5 Switch the function ring to one of the 3
speed levels I, II or III, whereas I is the
slowest and III is the fastest level. There is
one additional speed level available within
every speed types. To select it, push the
trigger button, let go and push again.
6 Go into the water and hold the SCUBAJET
with the dive adapter. In order to activate
the LED light, push the slide at the side of
the dive adapter forward. Push it forward
againinordertoswitchthelighto.
4 Attach the dive adapter to the adapter rail on
the tube. Looking at the dive adapter from
above,thedirectionforxationisclockwise.
CanttheSCUBAJETslightlyandxthescrew
clockwise.