HANDLING
Fit the connecting cable on the case and plug the power pack into the socket. Now the luminous diode lights up showing "OFF". The appliance is
ready for use.
You can choose between:
for low current flow (sensitive skin areas and smallest hairs)
• for the medium stage (with normally compatible skin and normal hair growth)
• for higher current flow (insensitive skin areas and strong hair forms)
In any case, it is recommended that the various stages, starting with the lowest, be tested, in order to find the preferred and most pleasant intensity
with the best result depending on one's own skin and hair type.
Depilation process:
1. Clean and warm up the appropriate part of the body (bath, compress, infrared light)
2. Selection of the depilation appliance (tweezer head or coil tweezers)
3. With the depilation appliance grip the hair(s) by means of the keys
4. Keep the keys of the depilatory tweezers depressed for about 30 seconds (the luminous diode on the tweezers then shines more brightly)
5. Carefully pull out the hair in the direction of the growth direction.
Should the hair not be loosened without pain the first time, please repeat the application once more. Probably this hair has a particularly strong
root or even several root canals.
If necessary, please increase the current intensity and carry out a new test.
• LO
Med
HI
14