EZ Screen Room EZSR810CBZ User manual

Type
User manual
Care and Maintenance
While most powder coat nishes are tougher and much more exible than convenonal solvent based
paints, they are about the same hardness as automove paint, so they will scratch. To clean a powder
coated surface, use the same care and methods you would use to clean your car. Gently wash with a
clean, so cloth and a mild detergent followed by a clear water rinse. Addionally, certain solvents c
an
harm powder coat nishes. Avoid contact with nail polish remover, paint or lacquer thinner, motor oils,
transmission and brake uids or parts cleaning uids. If any of these should contact the powder coated
surface, immediately wipe the area with a so, clean cloth, and wash as described above.
  • Page 1 1

EZ Screen Room EZSR810CBZ User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI