2. Greenlee
  3. 1905 Adjustable Cable Stripper

Greenlee 1905 Adjustable Cable Stripper User manual

  • Hello! I am an AI chatbot trained to assist you with the Greenlee 1905 Adjustable Cable Stripper User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What materials can the Greenlee 1905 Adjustable Cable Stripper remove insulation from?
    What size of wire or cable can the stripper handle?
    How do I adjust the stripper for different cable diameters?
    How do I operate the stripper?
    What maintenance does the stripper require?
    Is the stripper insulated?
    What safety precautions should I take when using the stripper?
1905
Adjustable Cable Stripper
Description
The 1905 Adjustable Cable Stripper is intended to remove H. D. polythene or
PVC insulation from aluminum and copper conductors.
Capacity
Wire or cable with 9/16" (14 mm) to 1-9/16" (40 mm) outside diameter.
Purpose
This instruction manual is intended to familiarize operators with the safe
operation and maintenance procedures for the Greenlee 1905 Adjustable
Cable Stripper. Replacement manuals are available upon request at no charge.
INSTRUCTION MANUAL
999 3094.3 © 2002 Greenlee Textron IM 1373 REV 1 11/02
4455 Boeing Drive, Rockford, IL 61109-2988 USA
Customer Service (International): 815-397-7070 • Fax: 815-397-9247
Customer Service (North America): 800-435-0786
USA Fax: 800-451-2632, 815-397-1865 • Canada Fax: 800-524-2853
Greenlee Textron is a subsidiary of Textron Inc.
www.greenlee.com
1905 Adjustable Cable Stripper
Electric shock hazard:
This is not an insulated tool.
Contact with live circuits can result
in severe injury or death.
Wear eye protection when using
this tool.
Failure to wear eye protection can
result in serious eye injury from
flying debris.
Setup
1. Loosen the blade locking screw (3).
2. Twist the slotted head cam (2) until the blade (1) will strip the insulation
without damaging the conductor.
3. Tighten the locking screw (3).
4. Use adjustment wheel to set for different cable diameters.
Operation
1. Place the cable stripper around the cable. Squeeze the handles together
until the tool snaps to the closed position.
2. Rotate the cable stripper around the cable.
Note: The cable stripper will tend to feed toward the end of cable as the tool
is rotated around the cable. If necessary prevent this by putting pressure
against the tool in the opposite direction.
3. Open the handles to release the cable from the cable stripper.
Maintenance
• Keep tool clean and dry.
• Oil moving parts occasionally.
• Sharpen blade with an oil stone when necessary.
Do not alter the blade angle.
• Apply a small amount of grease to the jaws to reduce friction and make
stripping easier.
OPEN
CLOSE
1
2
3
4
KEEP THIS MANUAL
Identification
1. Blade
2. Slotted Head Cam
3. Blade Locking Screw
4. Adjustment Wheel
/