American Standard Right Height Toilet Ravenna User manual

Brand: American Standard

Model: Right Height Toilet Ravenna

Type: User manual

K62

RAVENNA™

RIGHT HEIGHT™ TOILET

VITREOUS CHINA

Revised 5/05

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION

OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

IMPORTANT: Dimensions of  xtures are nominal and may vary within the range

of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

305mm

(12)

756mm

(29-3/4)

C/L OF OUTLET

83mm

(3-1/4)

FINISHED WALL

222mm

(8-3/4)

19mm ± 6mm

(3/4 ± 1/4)

419mm

(16-1/2)

C/L

470mm

(18-1/2)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

305mm

(12)

178mm

(7)

16mm

(5/8)

FINISHED

FLOOR

787mm

(31)

241mm

(9-1/2)

152mm

(6)

476mm

(18-3/4)

222mm

(8-3/4)

SUPPLY

REQ'D

381mm

(15)

To Be Speci ed:

❏ Color:

❏ Seat: American Standard #5324.019 “Rise and

Shine" solid plastic, closed front, elongated seat

with cover.

❏ Seat: American Standard #5311.012 “Laurel"

molded closed front seat with cover.

❏ Alternate Seat:

❏ Supply with stop:

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE

BUILDING FACILITIES-CHECK LOCAL CODES.

RAVENNA™ RIGHT HEIGHT™ TOILET

❑ 2646.016

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• Elongated siphon action jetted bowl

• 16-1/2" Rim height for accessible applications

• Fully glazed 2" trapway

• AquaForce  ushing technology

• Styled tank w/ tted tank cover

• Chrome trip lever

• Speed Connect™ tank/bowl coupling system

• Sanitary bar on bowl

• 2 color matched bolt caps

• 100% factory  ush tested

• Design coordinated to Ravenna

pedestal lavatory

❑ 3417.016 Bowl

❑ 4096.016 Tank

Alternate Tank:

❑ 4096.516 with Aquaguard tank liner

Nominal Dimensions:

756 x 476 x 787mm

(29-3/4" x 18-3/4" x 31")

Fixture only, seat and supply by others

Compliance Certi cations -

Meets or Exceeds the Following Speci cations:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

American Standard Right Height Toilet Ravenna User manual

American Standard Right Height Toilet Ravenna User manual

American Standard Right Height Toilet Ravenna User manual

Related papers

Other documents