Item# _______________________________________________
Job _________________________________________________
Plastic Dish Racks Compartmented Cup Racks
InterMetro Industries Corporation
North Washington Street
Wilkes-Barre, PA 18705
www.metro.com
Copyright © 1993 InterMetro Industries Corporation
16.01
SANI-STACK
®
II
COMPARTMENTED
PLASTIC CUP RACKS
Full-Size
• Individual Compartments in the C24
prevent cup-to-cup contact that causes
wear, chipping and crazing. You save
on expensive replacement costs.
• Greater Rack Capacity: The C24
accommodates 24 cups vs. as few as
16 in competitive racks of equal size.
That’s up to 50% more capacity . . . up
to 33% fewer racks to buy!
• Sanitary Design: Compartments within
the C24 angle each cup so that its
entire rim is exposed during washing;
and there’s no water accumulation
afterwards. Also, the handle is the only
part of the cup that’s touched during
removal.
Half-Size
• The C10 model is assembled using a
special vinyl-coated wire insert in a
P31W open-style, half-size plastic rack.
C24
C10
Copyright © 2000 InterMetro Industries Corp.
Job____________________________________________
COMPARTMENTED CUP RACKS
Manufactured by:
InterMetro Industries Corporation
North Washington Street, Wilkes-Barre, PA 18705
Phone: 570-825-2741 • Fax: 570-825-2852
For Product Information Call: 1-800-433-2232
Visit Our Web Site: www.metro.com
Plastic Dish Racks Compartmented Cup Racks
16.01
Additional Features of Sani-Stack
®
II
Full-Size Plastic Racks
• Material: Smooth polypropylene. Resists
scratches and chips.
• Rugged Construction: A strong, plastic
support brace beneath each full-size rack
prevents distortion and sagging under
heavy loads.
• Money-Saver: Greater rack capacity
means fewer trips through the dishwasher
with corresponding savings in detergent,
hot water and electricity.
• Beveled Bottom Edges: Lets water gush
up into the ware rather than hit square
edges head on and splash where it isn’t
needed. Job is done with less water . . .
less energy.
• Better Handling: Metro racks have open
sides for a firm, easy grip.
• Space-Saver: Racks stack for storage
and transport. And the stacking weight is
on the racks, not on items in the racks.
DIMENSIONS:
Inside Outside Shipping
Size No. of Height Height Weight
Model No. Type (in.) (mm) Compartments (in.) (mm) (in.) (mm) (lbs.) (kg)
C24 Cup 19
3
/
4
sq.* 502 x 502 24 3
7
/
8
98 5
1
/
2
140 7
1
/
2
3
†C10 Cup 10 x 19
3
/
4
254 x 502 10 3 76 4
1
/
4
108 4
1
/
2
2
*Dimensions at base. Top dimension 20
3
/
16
” sq. (513mm).
†Plastic rack with vinyl-coated wire insert.
NOTE: C10 compartment clearance: 3
1
/
2
” x 4
1
/
2
” (89 x 114mm)
L02-092
Rev. 12/00 BJ
Printed in U.S.A.
Information and specifications are subject to change
without notice. Please confirm at time of order.
/