Voyager JSPA3G Installation guide

Model No.: JSPA3G Installation Size: 210 x 297mm Date: 21 MAY 2014

JSPA3G 3” Waterproof

SPA Speaker Installation

Specifications:

Impedance:

Max Power:

Continuous Power:

Weight:

JSPA3G

4 Ohms

60 Watts

30 Watts

0.5lb / 0.2kg

1.48”

Installed Depth

Cutout and use as template for drilling

Scale = 1:1

Note: Faxing or reproducing can change scale

Terminal Sizes

Pos.= 0.187” x 0.032”

Neg.= 0.110” x 0.032”

2.86”

Cutout

0.12” (3mm) holes

3.54” Overall Diameter

This speaker is designed to be flush mounted

where space is limited. Locate the desired

mounting location. Use the provided template

if a 3” hole saw is not available. Be sure to

check behind the hole location to ensure you

do not damage anything when drilling/cutting.

After cutting the hole, insert the speaker or

use the template and drill 0.12” (3mm) holes

for the mounting screws (included). Connect

the positive speaker wire to the 0.187” termi-

nal and the negative speaker wire to the

0.110” terminal.

www.asaelectronics.com