TempStar™ HH/GPX
Models
TempStar™ HH/GPX
Door Type
Project
Item
Quantity
CSI Section 11400
Approval
Date
Highway 25E
P. O. Box 1060
Barbourville, KY 40906
Tel: 606-523-9795
Tel: 1-888-800-5672
Fax: 606-523-9196
E-mail: info@jacksonmsc.com
www.jacksonmsc.com
07610-002-66-62 (09/07)
Mandatory Specs
Specify incoming water
temperature
Specify how far booster
will be placed from unit
Specify altitude for
proper booster size
Optional Features
Water hammer arrestor
Flanged feet
Drain quench system
Scaltrol
Multi-cycle timer (Extra Heavy,
Heavy, Medium, Normal)
Built-in pressure regulator and
gauge
Extended 15 second high tempera-
ture rinse provides superior cover-
age and rapid drying
20 3/4” (527 mm) wide X 27” (686
mm) high opening accommodates
18” (457 mm) X 26” (660 mm) sheet
pans and 60 quart mixing bowls
Auto-fill / auto-start
Safety door switch
External gas booster heater
- Capable of minimum 70˚F
(21˚C) degree temperature rise
- Recirculates water through stain-
less steel coils in wash tank to main-
tain 150˚F (66˚C) degree minimum
temperature
Hi-limit thermostat and low water
protection
Top mounted controls for ease of
installation
Unique lower counter-rotating
wash arms and upper wash arm
provide optimum spray coverage
and superior cleaning action
Unique split-door design for installa-
tions with low ceiling heights
Large scrap tray
Self-draining stainless steel pump
Detergent/rinse additive signal
connection fuse box
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Standard Features
Accessories
U s e s 1 . 3 6 g a l l o n s ( 5 l i t e r s ) o f 1 8 0 ˚F
(82˚C) w a t e r p e r r a c k
T o t a l a u t o m a t i c n o r m a l c y c l e - 6 2
s e c o n d s
5 3 r a c k s p e r h o u r n o r m a l c y c l e
2 H P W a s h P u m p M o t o r
S i n g l e P o i n t c o n n e c t i o n s f o r a l l u t i l i t i e s
B u i l t - i n w a t e r p r e s s u r e r e g u l a t o r a n d
p r e s s u r e g a u g e
F i e l d c o n v e r t i b l e f r o m s t r a i g h t t h r o u g h
t o c o r n e r o p e r a t i o n s
H e a v y d u t y s t a i n l e s s s t e e l
c o n s t r u c t i o n
Specifications
36” (914 mm) compartment
rack 4 1/6” (4 mm) tall
36” (914 mm) compartment
rack 5 5/8” (16 mm) tall
36” (914 mm) compartment
rack 7” (178 mm) tall
Combination rack
Peg rack
Sheet pan rack 18” X 26” /
(457 mm X 660 mm) baking
pans
Delime/manual wash switch
Adjustable bullet feet
Uses standard 20” X 20”
(508 mm X 508 mm) racks
Front dress panel
•
•
•
•