2. Home
  3. Domestic appliances
  4. Climate control
  5. Household fans
  6. WINGBO
  7. WBCF-BS33-BK

WINGBO WBCF-BS33-BK User manual

  • Hello! I am an AI chatbot trained to assist you with the WINGBO WBCF-BS33-BK User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Fan wobble 3. Check whether the screw of the blade retracted to the motor is locked
WBCF-BS29~BS33 Series
PLEASE READ AND SAVE THESE INSTRUCTIONS
IX. Ceiling Fan Troubleshooting Solutions &Common Problems
WITHOUTLIGHTKITWITHLIGHTKIT
Thanksforyourpurchase!
Shouldyouhaveanyquestionsorconcerns,pleasedonothesitatetocontact
usbymailaddress
Before using this ceiling fan with light, please read this manual carefully and
operate strictly in accordance with the procedures.
1 The input voltage of this product: 120V/60Hz
2 If you have insufficient knowledge of electrical appliances, be sure to hire an
experienced expert to install them.
3 Before installing and disassembling the ceiling fan light, please turn off the
power first. The installation must be installed in the order of ground wire, live
wire, and neutral wire. Before disassembly, it must be disassembled in the order
of neutral wire, live wire and ground wire to avoid electric shock.
4 The ceiling fan must be installed on a solid ceiling, and the location of the ceiling
fan must be able to withstand a gravity greater than 60 KG.
5 When installing the ceiling fan, all screws must be securely locked.
6 When the ceiling fan is rotating, no objects should touch the blades to avoid
danger.
7 The angle and elevation of the leaf frame are determined after many repeated
measurements, so it cannot be changed at will. When installing the leaf frame
and blades, special care should be taken not to force collisions. If the angle and
elevation angle of the leaf frame are deformed that will cause the ceiling fan to
shake.
Ⅲ、Basic parameters
Ⅰ、Precautions
Ⅱ、Prepare tools before installation:
4*Blades
1*Instruction
1*Lamp Plate+LED
support@wingbolighting.com
1 Voltage: 120V/60Hz
2 Power: Motor power: 42W LED power: 24W
3 Speed + Color change: 6speed+3 color temperatures(Cool white light 6500K+
warm light 3000K+ neutral light 4500K)
4 Number of rotating leaves: 4 blades
5 Fan blade material: Plywood
6 Motor material: Pure copper wire winding and high-quality silicon steel stator,
high efficiency, super quiet, energy saving.
7 Control method: Remote control
8 Diameter: 52inch
9 Reversible：YES
2.Installthehangerbrackettotheoutletbox
a. Takeoffthescrewsontheoutletbox.
b. Installthehangerbrackettotheoutletboxbyscrews
ATTENTION:
Make sure the power is off when you are connect in
these wiring for safety, and make sure every wiring
is connected other right place.
GROUND WIRE
1.Connectthefancontroller
a.Hangthefanmotorwithasteelcableonthehookingoftheceilingplate
(Figure5)
b.Wiringmethodofremotecontrolreceiver:(Figure6)
1).Connectedtheneutralwirefromceilingtoreceiverwhitewire(ACINN)
2).Connectedthelivewirefromceilingtoreceiverblackwire(ACINL).
3).ConnectedtheyellowMotorW)frommotortoyellowwire(MotorW)from
receiver.
4).Connectedtheredwire(MotorV)frommotortoredwire(MotorVfrom
receiver.
5).ConnectedtheGreywire(MotorU)frommotortoGreywire(MotorU)from
receiver.
VI、Install the fan motor
c.Matchthetwokeyholesofthefanmotortothetwofixingscrewsofceilingplate,
andthenturnthemotorclockwiseontheceilingplate(Figure7)
d.Alignthetwofixingscrewsofthefanmotorthathavejustbeentwistedtothe
holes,thentightenthem,andtightentheremainingfixingscrewsinturn
(Figure8)
TIPS:Usingdifferentscrewstosecuretheceilingplateaccordingtothe
differentmaterialoftheceiling,pleasedonotinstalltheceilingplateon
theceilingwhichisunabletobear60KGtopreventanypotentialdanger.
Aftertheceilingplateislocated,makesureitcanwithstandmorethan
60KG,trytopullbyhandstotestiftheceilingisstrongenoughforsafety. 6).Connectedthebluewire(FORLIGHT)frommotortobluewire(FOR
LIGHT)fromreceiver.
7).Connectedthewhitewire(FORLIGHT)frommotortowhitewire(FOR
LIGHT)fromreceiver.
Toreducetheriskoffire,electricshock,orpersonalinjury
mounttoanoutletboxmarked“ AcceptableforFanSupport”.Usethe
mountingscrewsprovidedwiththeoutletbox.Mostoutletboxescommonly
usedforsupportinglightingfixturesarenotacceptableforfansupport
andmayneedtobereplaced.Consultaqualifiedelectricianifindoubt
WARNING:
steel cabele
/