Bedsure BS-HP2433 User manual

Brand: Bedsure

Model: BS-HP2433

Type: User manual

Bedsure BS-HP2433 is a heating pad designed for personal use, providing targeted warmth therapy for the neck and back. It features six adjustable heat levels and three auto-shutoff time settings for customized comfort and safety. The controller allows for easy operation, while the soft, plush material ensures a cozy and comfortable experience. Ideal for relieving muscle tension, stiffness, and promoting relaxation.

HEATING PAD FOR NECK AND BACK

-FOR PERSONAL USE ONLY-

IMPORTANT NOTICE

MODEL #BS-HP2433

read the entire manual carefully

before using this service

22.

Before each use, always inspect the product to ensure there is no damage to the

power cord, the Control, or the Pad.

The Pad Connector and Control Connector are designed to connect only one way.

Align the inner prongs and then push together until Connectors are touching

check with your healthcare provider before using with a pacemaker or any medical

devices

do not plug into the wall outlet until you have connected the controller cord to the

product

CONTROLLER COMPONENTS & FUNCTION DESCRIPTION

1 - Display

2 - ON/OFF Button

3 - Time Setting Button

4 - + and - Buttons

• Turn on with the switch button, the

default level is the standby level 01,

press the "+" "-" button to regulate

the setting up to level highest 06.

• Press the time setting button, the display lasts for

2.0 hours by default, press the "+" "-" button to

adjust the timing, If there is no operation after

ﬂashing for 3 seconds, it will return to the previously

set heating level.

• Press the "+" and "-" buttons to adjust the heating level

01-02-03-04-05-06 and the timing 1.0-1.5-2.0)H

AUTO SHUT OFF MODE

This product will turn o after a set duration of time. Setting times have 1.0,1.5 and

2.0 Hours

Burns can occur regardless of the control setting; check skin under Pad frequently.

Unplug the product when it is not in use.

CAUTION

85W

Do not dry-clean this heating pad. Cleaning solvents may have a deteriorating

eect on the insulation of the heating element.

WARRANTY AND CUSTOMER SUPPORT

If you need help regarding product issues, after-sales service, or other relevant problems,

BEDSHE INTERNATIONAL CO., LTD. 20651 Golden Springs Dr., Ste. 277 Diamond Bar, CA

91789.USA

Wash by hand or as follows in automatic washer using slow agitation and normal spin

speed: Fill washer with warm water. Add minimum amount of all-purpose detergent,

agitate to dissolve, measure heating pad before washing. Add heating pad and soak ﬁve

minutes. Agitate two minutes. Spin. Fill for cool rinse, agitate one minute then spin.

Tumble dry low., ﬁve minutes only, or line dry. Remove damp heating pad from dryer,

block to original size, and drape to ﬁnish drying. Do not iron your heating pad.

WASHING INSTRUCTIONS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

Note: This product has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This product generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this product does cause harmful interference to radio or television

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the product and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void

the user’ s authority to operate the equipment.

FCC COMPLIANT

5023737

Bedsure BS-HP2433 User manual

Bedsure BS-HP2433 User manual

Bedsure BS-HP2433 User manual

Other documents