2. BMW
  3. i4 M50
i4 M50

BMW i4 M50 User manual

  • Hello! I've reviewed the technical document for the BMW i4 M50, specifically the instructions for removing the front door trim panel to access the mid-range loudspeaker. This document details the necessary steps, including the tools needed and precautions to avoid damage during disassembly of the door trim panel. I'm ready to answer any questions you might have about this process.
  • What kind of damage may occur when disassembling the front door trim panel?
    What special tools are needed to remove the door trim panel?
    What should be avoided during disassembly?
6/19/22, 2:32 PM
AIR - Technical documents
https://myair-bdr.bmwgroup.com/air/faces/xhtml/tdoc/TdocDocumentViewer.xhtml?st=REPARATURANLEITUNG&id=675d5f0e-e692-32c1-4108-b6538…
1/4
Removing and installing/replacing the loudspeaker (mid-range speaker) (front door) »
Remove front door trim panel
REP-TAT-P-5141-01-G26_1
Damage of high-quality surfaces.
Plastic wedges can damage high-quality surfaces.
Protect surfaces from damage.
BMW Group - AIR: 2022-06-19 / 14:31
Dealer: 32711/06
Model: i4 M50
Development code: G26
Model code: 31AW
Lead type: 31AW
RISK OF DAMAGE
Pull the door opener .
Mount a suitable special tool from the set of special
tools0 493 752 (00 9 329)on the recess in the
area(1).
Unclip the cover(2)of the door handle with the
detents(3).
Guide out the cover(2)of the door handle with the
guides and remove toward the front.
Mount a suitable special tool from the set of special
tools0 493 752 (00 9 329)on the recess in the
area(1).
Unclip cover (2)with detents (3)and remove it
downwards.
Loosen screws (1).
6/19/22, 2:32 PM
AIR - Technical documents
https://myair-bdr.bmwgroup.com/air/faces/xhtml/tdoc/TdocDocumentViewer.xhtml?st=REPARATURANLEITUNG&id=675d5f0e-e692-32c1-4108-b6538…
2/4
Guide the special tool 0 496 569 (00 9 325) into the
recess of door trim panel.
Lift and unclip the door trim panel (1)with the special
tool 0 496 569 (00 9 325)in the area (2).
Ensure that the seal of the module bracket (1)is not
damaged by the special tool 0 496 569 (00 9 325).
Starting from the disassembly point (1), release and
unclip the door trim panel (2)alternately on the left and
rightat the clips (3).
6/19/22, 2:32 PM
AIR - Technical documents
https://myair-bdr.bmwgroup.com/air/faces/xhtml/tdoc/TdocDocumentViewer.xhtml?st=REPARATURANLEITUNG&id=675d5f0e-e692-32c1-4108-b6538…
3/4
Ensure that the piping (1)in the marked area is not
damaged during disassembly.
Detach the door trim panel(1)with the detents(2).
Lift the door trim panel(1)up over the operating
rod(3).
Schematic diagram is for example
purposes. Some parts may differ in certain
details.
Release the detent(1)and guide out the Bowden
cable for the inner door handle(2).
The Bowden cable for the inner door
handle(2)guides itself out of the door handle here.
NOTE
6/19/22, 2:32 PM
AIR - Technical documents
https://myair-bdr.bmwgroup.com/air/faces/xhtml/tdoc/TdocDocumentViewer.xhtml?st=REPARATURANLEITUNG&id=675d5f0e-e692-32c1-4108-b6538…
4/4
Unlock and disconnect the plug connection(3)and
remove the door trim panel.
/