Page is loading ...
ELECTRIC GRIDDLE
Customer Support
MANUAL INSTRUCTIONS
（The picture only represents the image, may not match the real thing）
Thank You For Purchasing From
AIYCHEN
NOTE:
To continuously improve its products, AIYCHEN reserves the right to modify this information without prior
notification. For any questions during assembly, please watch the video in the product page for reference.
Or contact our customer service with any questions, comments, or concerns. Thank you for using AIYCHEN
products in your home!
AIYCHEN mainly produces and sells products such as electric fryers, toaster ovens, pizza ovens, steak ovens, gas
combination boilers, burger machines, noodle machines, heat preservation cabinets, toaster ovens, kitchen work
tables, kitchen carts, etc.; the products are fashionable, energy-saving and technologically advanced, and are
suitable for various hotels, Chinese and Western restaurants, bars, etc.
MADE IN CHINA
ELECTRIC GRIDDLE
- 1 -
READ THIS MANUAL INSTRUCTION CAREFULLY BEFORE USING
THE UNIT. PLEASE KEEP THIS FOR FUTURE REFERENCE.
1. Receiving And Checking
Thank you for selecting our electric griddle.
In order to protect your legitimate rights and interests, please pay attention to the following things when
receiving and checking the machine:
1. The outer packing of the machine is intact.
2. Machine’s model is consistent with your purchased.
3. The appearance of the machine is in good condition.
4. The attached parts are complete.
5. The internal components of the machine are in good condition.
2. Introduction
This CONTACT GRILL is the latest design electric heating product. All electrical components of this
product are supplied by reliable manufacturers to ensure quality and a high level of safety and low
energy consumption. In addition, the machine has a thermostat function that allows easy operation.
This machine is fully functional and of high quality, suitable for supermarkets, bars, western restaurants
and fast food restaurants adopted.
3. Product Specifications
Item NO
Dimensions(inch)
Power(W)
Voltage(V)
Frequency(Hz)
Switching few
HT-813(DQ182)
22.24*14.96*9
3600
110V
60
2
HT-813E(DQ167)
22.24*14.96*9
3600
110V
60
2
ELECTRIC GRIDDLE
- 2 -
4. OPERATING INSTRUCTIONS
Before operation, check that your mains voltage corresponds to that stated on the appliance. Place this
unit on a dry, level surface. No combustible or explosive objects can be placed in its vicinity. The
operation space must have good ventilation, with the ambient temperature not higher than 122℉
（50℃）.
1. Place the Cone Baker horizontally on a firm workbench. Check if the power plug is properly connected.
2. Turn the power switch to “O” (OFF), and the temperature controller knob to “OFF”.
3. Turn the power switch to “I” (ON), the power will supply to the unit.
4. Adjust the temperature controller knob to 482℉（250℃）. The red lamp will light indicating the electro-thermal pipes
are supplied with power and are starting to heat.
5. When the temperature reaches to 482℉（250℃）, the temperature controller will automatically disconnect the power
supply and the yellow indicator lamp will go out, indicating the electro-thermal pipes stop heating.
6. When the temperature drops a little , the temperature controller will automatically re-connect to power supply and
the red lamp will light, indicating the electro-thermal are starting to heat again. This process will repeat over and
over again. Maintaining the temperature within the preset range.
7. When the temperature reaches to 482℉（250℃）, film the baking plate with some seed fat, put the paste in the
baking plate, put down the upper cover, set the time of the calculagraph. The time range is 0-5 minutes.
8. When the operation is completed, turn the temperature controller knob to “OFF”, and the power switch to “O”.
Disconnect the power supply to ensure safety.
5. REPAIRS AND MAINTENANCE
Always unplug the unit and let it completely cool down before cleaning. It shall be cleaned with a soft and dry piece of
cloth, or with neutral detergent when necessary. Avoid scratching the surface of the unit with sharp metal. The unit shall
not be cleaned with a water jet or be immersed in water for cleaning. If the unit will not be used for long period of time,
it must be cleaned and stored in a place with good ventilation and without corrosive gas. When temporary storage is
ELECTRIC GRIDDLE
- 3 -
needed, proper rainproof measures shall be taken.
6. Warranty and Service
If any problems occur, please contact the AIYCHEN customer service center via the contact information
listed in this User Guide.
We can only provide after sales service for products that are sold by AIYCHEN or AIYCHEN authorized
retailers and distributors. If you have purchased your unit from a different place, please contact your
seller for return and warranty issues.
If you have any questions, please contact us at
support@doketech.com
/
