TRUE FINE TD20029FL User manual

Type
User manual

TRUE FINE TD20029FL is a versatile 3-Light Flush Mount Lighting fixture that adds a touch of elegance to any room. With its E26 bulb compatibility (bulbs not included), you can customize the lighting to your desired brightness and ambiance. Installation is simple with the included mounting hardware and detailed wiring instructions. Safety features include a green grounding screw for proper grounding and a warning against connecting the ground wire to black or white power supply wires. The fixture's metal bands and acrylic board provide a stylish and durable design.

TRUE FINE TD20029FL is a versatile 3-Light Flush Mount Lighting fixture that adds a touch of elegance to any room. With its E26 bulb compatibility (bulbs not included), you can customize the lighting to your desired brightness and ambiance. Installation is simple with the included mounting hardware and detailed wiring instructions. Safety features include a green grounding screw for proper grounding and a warning against connecting the ground wire to black or white power supply wires. The fixture's metal bands and acrylic board provide a stylish and durable design.

Overview
Assembly Instruction
Wiring Instruction
1.Insert the green grounding screw into the hole with two raised dimples on
the mounting bar. Wrap the ground wire from the fixture (if supplied)
around the green grounding screw, then connect it to ground wire from the
outlet box (if not fixed on the outlet box) using a wire connector
(not supplied).If ground wire from the fixture is not supplied, wrap the
ground wire (if not fixed on the outlet box) from the outlet box around the
green grounding screw and tighten it.
NEVER CONNECT GROUND WIRE TO BLACK
OR WHITE POWER SUPPLY WIRES.
2.Take note for the color of the wire(s) on your fixture. Identify which group
your fixture wire(s) falls into and connect the wires according to the
directions below:
3.Take your fixture wire(s) from [Group A] and place evenly against the
black wire from the outlet box. Do NOT twist wires together before using
wire connectors.
4. Fit a wire connector over the wires and screw the connector clockwise
until you feel firmness.
5.Try gently to pull the connector off the wires. If you can pull the
connector off, carefully re-do steps3 and4 as above, and check again for
a firm connection.
6. Connect the fixture wire from [Group B] to the white wire from the outlet
box in the same manner. Make sure no bare wires can be seen outside wire
connectors.
Product Specifications
Product Packaging
Cleaning
Safety Information
CONTACT US
Instructions Manual
3-Light Flush Mount Lighting
Input Voltage 120V
Rated Power 60W Max
Lamp Socket E26
To clean,wipe fixture with a soft cloth. Clean glass with a mild soap.Do not
use abrasive materials such as scouring pads or powders, steel wool or
abrasive paper.
E-mail:service @24h-reply.com
Always switch off the electricity supply and allow to cool for 10 minutes
before changing the light bulbs.
[GROUP A]:
Connect to Black House Wire
[GROUP B]:
Connect to White House Wire
BLACK
*PARALLEL WIRE (round & smooth)
WHITE OR GREY WITE TRACER
BROWN, GOLD OR BLACK
WITHOUT TRACER
WHITE
*PARALLEL WIRE (square & ridged)
WHITE OR GREY WITHOUT TRACER
BROWN, GOLD OR BLACK
WITH TRACER
Canopy(A)
Metal
band (B)
Bulb(F)
(not Included)
Acrylic board (G)
TD20029FL
Green(Ground)
Shade(D)
White
Ribbed
Bare copper wire(Ground)
[GROUP]
Outlet box
Black
Wire nuts
Smooth
Screw(H)
Screw(G)
Mounting strap(I)
[GROUP]
Print in china
1. Assemble Metal band(B) by Screw nut(C ) onto Canopy(A) and
Bottom frame( E )
2. Assemble 2 pcs of Metal band(B) first, then put the shade on. After
that, repeat step 1 to assemble the third and last metal band.
3. Adjust the 3 Metal bands(B) and make sure they're all well
positioned, then tighten all Screw nuts( C )
4. Install Bulbs (not included), need three E26 bulbs.
5. Fix Mounting strap (I) to outlet box with Screw (G).
6. Connect the wires according to the picture above.(Please refer to the
wiring instruction for details )
7. Place Canopy (A) onto the outlet box, secure with Screw (H).
8. Peel off the protective cover on acrylic board(G)
9. Gently bend acrylic board (G) a little bit and insert it into the bottom
of the fixture and then release it. Adjust it to make it well positioned.
Metal band x 3 & Screw nut x 6
Canopy x 1 & Mounting strap x 1
Screw x 2 & wire nut x 3
Shade x 1
Acrylic board x 1
Lamp instruction x 1
Screw nut(C)
Bottom
frame(E)
  • Page 1 1

TRUE FINE TD20029FL User manual

Type
User manual

TRUE FINE TD20029FL is a versatile 3-Light Flush Mount Lighting fixture that adds a touch of elegance to any room. With its E26 bulb compatibility (bulbs not included), you can customize the lighting to your desired brightness and ambiance. Installation is simple with the included mounting hardware and detailed wiring instructions. Safety features include a green grounding screw for proper grounding and a warning against connecting the ground wire to black or white power supply wires. The fixture's metal bands and acrylic board provide a stylish and durable design.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI