ECWSBP

EarthTronics ECWSBP Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the EarthTronics ECWSBP Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Document Instructions
Rev. Date 4.26.2023
Order Code 11808
Model # ECWSBP
EarthTronics, Inc. | Norton Shores, MI 49441 | www.earthtronics.com | Email: contact@earthtronics.com
Toll Free: 866.632.7840 Rev. 4.26.23 | EC11808
5 Key Battery Powered Wall Switch
Install 2pcs CR2032 battery by opening the back cover.
Press button(1) and (2) together over 2 seconds to enter pairing mode or
achieve reset function. This switch can be scanned in next 30 seconds.
In EarthConnect App "Switch" page, click to add the switch.
Select the light/light group to be controlled by this switch.
Select 3 scenes to be controlled by this switch.
IMPORTANT: Battery model is CS2032.
The battery can be used for 5 years based on the usage of twice a day.
INSTRUCTIONS
Step 1: Open the cover of the remote control with a flat
screw driver.
Step 2: Replace the battery (CS2032) with a new one.
Step 3: Attached the cover.
Document Instructions
Rev. Date 4.26.2023
Order Code 11808
Model # WP1025
EarthTronics, Inc. | Norton Shores, MI 49441 | www.earthtronics.com | Email: contact@earthtronics.com
Toll Free: 866.632.7840 Rev. 4.26.23 | EC11808
LEARN MORE: EarthConnect
www.earthtronics.com/earthconnect
Download the EarthConnect App Download the app instructions
5 Key Battery Powered Wall Switch
WALL SURFACE INSTRUCTIONS
Step 1: Remove the cover plate carefully with scissors. Step 2: Mark the position you want to install.
Step 3: Drill two holes with power drill.
Step 4: Attach the bracket with the supplied
self-tapping screws.
Step 5: Slide remote controller into the bracket. Step 6: Attach the wall plate.
1/2