WARNING
HVAC Accessories
MODEL IAD SERIES
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
Electrical products can cause death or injury, or damage to property.
If in any doubt about the installation or use of this product, consult a competent technician.
INSTALLATION
WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN.
1. Please read the instructions before use
2. Suitable for high, medium and low pressure applications
Instruction Manual
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
www.ortechindustries.ca
205 Summerlea Rd
Brampton, ON L6T 4E5
CAUTION
ORTECH reserves the right to modify at any time, without notice, any or all of our product's
features, designs, components and specifications to meet market changes.
Connect with
outer duct
Connect with
Inner duct
Latch
1. Cut a suitable hole in the duct
2. Please refer to the picture above:
The holes in the back connect with the inner duct by screws directly.
The holes in the front connect with the outer duct by screws directly.
3. Turn on the latch if you need to clean,
or inspect the duct and the door won't be down due to safety chain
/