MODEL NO. OTBTSPOD
Selfie Stick & Tripod with Remote
QUICK-START GUIDE
User Guide
Photograph
Press the volume button on your phone to act as
the shutter button.
Use the remote control to take a photo.
Mount the phone
Rotate the phone holder till you can pull open
the holder handle and mount the phone securely
on the holder.
Open the phone holder
Rotate the phone holder so it faces forward and
adjust to the desired angle.
Bluetooth pairing
Hold the camera key for 3 seconds until the
blue light flashes to show that the Bluetooth is
turned on: pair up with“OTBTSPOD”. The
blue light will be on all the time if the pairing is
successful.
Hold the camera key for another 3
seconds to turn remote off.
Compact Action Camera (CAC) Mount
Rotate the phone holder back to the closed state,
and then rotate the CAC mount up, you can put
a compact action camera in the CAC mount.
Wireless
remote
Compact Action
Camera Mount
Note
In order to protect your phone, please keep the tripod steady while preventing
other external forces from bumping the tripod.
Use tripod
This product has an inbuilt tripod. Open the selfie holder from the bottom and
fix it on a steady horizontal plane, then you can start to enjoy your selfie
shooting experience.
360
Separated wireless remote
control is designed to be
used with a Bluetooth
range of up to 10 metres.
The bottom of the remote
control is equipped with a
charging port; please use
it to charge this remote.
Switch between
phone holder
and CAC mount
Charging
Plug the micro USB charging cable into the charging port to
start charging.
Micro USB Port USB
Charging
Cable
(included)
USB Power Adaptor
(Sold Separately)
Warning
Please charge with 5V/1A USB power adaptor only.
The Bluetooth® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Officeworks Ltd. is
under license.
-
1
-
2
-
3
-
4
