Sonoff miniR2 User manual

Type
User manual

Sonoff miniR2 is a smart switch module that allows you to remotely control your home appliances and schedule power on/off. With the eWeLink app, you can turn your devices on/off from anywhere, share control with your family, and even set up smart scenes to automate your home. The switch is compatible with Amazon Alexa and Google Assistant for voice control, and it also supports LAN control for local control without an internet connection.

Sonoff miniR2 is a smart switch module that allows you to remotely control your home appliances and schedule power on/off. With the eWeLink app, you can turn your devices on/off from anywhere, share control with your family, and even set up smart scenes to automate your home. The switch is compatible with Amazon Alexa and Google Assistant for voice control, and it also supports LAN control for local control without an internet connection.

1. Power o
ON O FF
ON O FF
ON O FF
N In L Out S2
L In S1
N In
L In
N In
100-240V
AC
L
L1
L2
SPDT
L
L1
L2
SPDT
2. Wiring instruction
3. Download APP
SONOFF TECHNOLOGIES CO., LTD. English
Operating Instruction
To avoid electric shocks, please consult the dealer or a qualified professional for
help when installing and repairing! Please do not touch the switch during use.
Make sure the neutral wire and live wire connection is correct.
S1/S2 can connect with the rocker light switch or doesn't connect. To ensure safety,
do not connect the neutral wire and live wire to it.
6
eWeLink
eWeLink
Android™ & iOS
4. Power on
5. Add the device
After powering on, the device will enter the quick pairing mode (Touch) during the
rst use. The Wi-Fi LED indicator changes in a cycle of two short and one long flash
and release.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If
you want to enter this mode, please long press the manual button for about 5s
until the Wi-Fi LED indicator changes in a cycle of two short and one long flash and
release.
Sou nd Pa iri ng
Add dev ice in th is mode i f your
devic e s uppor t this fe atur e.
Sca n QR co de
GSM dev ices an d devic es with Q R co
de can be a dded in t his mod e.
Quick Pairing
WIF I devic es can be a dded in t his mo
de( make su re the de vice is i n pairi ng
mod e).
Add D evice
Tap “+” and select “Quick Pairing, then operate following the prompt on the APP.
1
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ”
to pair.
Long press Pairing button for 5s until the Wi-Fi LED indicator changes in a cycle of
two short flashes and one long flash and release. Long press Pairing button for 5s
again until the Wi-Fi LED indicator flashes quickly. Then, the device enters
Compatible Pairing Mode.
2Tap “+” and select “ Compatible Pairing Mode ” on APP.
Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then
go back to eWeLink APP and tap “Next. Be patient until pairing completes.
SONOFF TECHNOLOGIES CO., LTD. English
7
N In L Out S2
L In S1
N In
N In L Out S 2
L In S1
N In
MINIR2
100-240V AC 50/60Hz 10A Max
100-240V AC 50/60Hz 10A Max
IEEE 802.11 b/g/n 2.4GHz
PC V0
42.6x42.6x20mm
Android & iOS
Wi-Fi
Model
Input
Output
Operating systems
Dimension
Material
Wi-Fi LED indicator(Blue)
Pairing button
Manual switch
On/off LED indicator(Red)
The device weight is less than 1 kg.
The installation height of less than 2 m is recommended.
Specifications
Product Introduction
Wi-Fi LED indicator status instruction
Status instruction
Wi-Fi LED indicator status
Quick Pairing ModeFlashes (one long and two short)
Device is connected successfully
Keeps on
Flashes quickly Compatible Pairing Mode
Unable to discover the router
Upgrading
Connect to the router but fail to connect to Wi-Fi
Flashes quickly once
Flashes quickly three times
Flashes quickly twice
SONOFF TECHNOLOGIES CO., LTD. English
8
Remote Control Single/Countdown
Timing
Share Control Voice Control Smart Scene
Sync Status No Hub Required LAN Control
Features
SONOFF TECHNOLOGIES CO., LTD. English
Power-on State
Turn on/off the device from anywhere, schedule power on/off and share APP with your
family to control.
9
Camera Linking
N In L Out S2
L In S1
N In
Deleting the device on the eWeLink app indicates you restore it to factory setting.
Factory Reset
Switch Network
If you need to change the network, long press the pairing button for 5s until the Wi-Fi
LED indicator changes in a cycle of two short and one long flash and release, then
the device enters quick pairing mode and you can pair again.
SONOFF TECHNOLOGIES CO., LTD. English
Common Problems
Q: Why my device stays “Offline”?
A: The newly added device needs 1 – 2mins to connect Wi-Fi and network. If it stays oine
for a long time, please judge these problems by the blue Wi-Fi indicator status:
1. The blue Wi-Fi indicator quickly flashes once per second, which means that the switch failed
to connect your Wi-Fi:
Maybe you have entered a wrong Wi-Fi password.
Maybe there's too much distance between the switch your router or the environment
causes interference, consider getting close to the router. If failed, please add it again.
The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network.
Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile
datanetwork on your phone to create a Wi-Fi hotspot, then add the device again.
2. Blue indicator quickly flashes twice per second, which means your device has connected to
Wi-Fi but failed to connect to the server.
Ensure steady enough network. If double flash occurs frequently, which means you access
an unsteady network, not a product problem. If thenetwork is normal, try to turn off the
power to restart the switch.
10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Sonoff miniR2 User manual

Type
User manual

Sonoff miniR2 is a smart switch module that allows you to remotely control your home appliances and schedule power on/off. With the eWeLink app, you can turn your devices on/off from anywhere, share control with your family, and even set up smart scenes to automate your home. The switch is compatible with Amazon Alexa and Google Assistant for voice control, and it also supports LAN control for local control without an internet connection.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI